V2: just check napi->dev->netdev_ops instead of getting clever with the
netdev registration state.
Original cover letter:
Hi Dave,
I stumbled across a reproducible kernel panic while playing around with
busy_poll on a Linux 4.9.86 kernel. There's an unfortunate interaction
between init_dummy_netdev, which doesn't bother to fill in netdev_ops, and
sk_busy_loop, which assumed netdev_ops is a valid pointer.
To reproduce on the device under test (DUT), I did:
$ ip addr show dev wlan0
8: wlan0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc mq [...]
inet 172.16.122.6/23 brd 172.16.123.255 scope global wlan0
$ sysctl -w net.core.busy_read=50
$ nc -l 172.16.122.6 5001
Then transmitted some data to this socket from a second host:
$ echo "foo" | nc 172.16.122.6 5001
The DUT immediately hits a kernel panic.
I've attached a patch that applies cleanly to the 4.9.87 stable release.
This fix isn't necessary for net/net-next (ndo_busy_poll was removed in
linux-4.11), but a further backport of this commit is likely required for
any stable releases older than linux-4.5.
I hope this is the right way to raise something like this. I couldn't find
a clear answer from the -stable and netdev on how to handle bugs in features
that no longer exist in mainline.
Thanks,
Josh
From: Eric Dumazet <hidden> Date: 2018-03-13 05:50:54
On 03/12/2018 10:32 PM, Josh Elsasser wrote:
init_dummy_netdev() leaves its netdev_ops pointer zeroed. This leads
to a NULL pointer dereference when sk_busy_loop fires against an iwlwifi
wireless adapter and checks napi->dev->netdev_ops->ndo_busy_poll.
Avoid this by ensuring napi->dev->netdev_ops is valid before following
the pointer, avoiding the following panic when busy polling on a dummy
netdev:
@@ -5042,7 +5042,10 @@ bool sk_busy_loop(struct sock *sk, int nonblock)gotoout;/* Note: ndo_busy_poll method is optional in linux-4.5 */-busy_poll=napi->dev->netdev_ops->ndo_busy_poll;+if(napi->dev->netdev_ops)+busy_poll=napi->dev->netdev_ops->ndo_busy_poll;+else+busy_poll=NULL;do{rc=0;
We could instead setup a non NULL netdev_ops pointer on these 'dummy' devices to not add a check in fast path, but I presume we do
not really care since this fix is for old kernels, and considering how long it took to discover this bug.
Reviewed-by: Eric Dumazet <redacted>
init_dummy_netdev() leaves its netdev_ops pointer zeroed. This leads
to a NULL pointer dereference when sk_busy_loop fires against an iwlwifi
wireless adapter and checks napi->dev->netdev_ops->ndo_busy_poll.
Avoid this by ensuring napi->dev->netdev_ops is valid before following
the pointer, avoiding the following panic when busy polling on a dummy
netdev:
...
Commit 79e7fff47b7b ("net: remove support for per driver ndo_busy_poll()")
indirectly fixed this upstream in linux-4.11 by removing the offending
pointer usage. No other users of napi->dev touch its netdev_ops.
Fixes: 060212928670 ("net: add low latency socket poll")
Fixes: ce6aea93f751 ("net: network drivers no longer need to implement ndo_busy_poll()") - 4.9.y
Signed-off-by: Josh Elsasser <redacted>