[PATCH net] nfp: use full 40 bits of the NSP buffer address

From: Dirk van der Merwe <redacted>

The NSP default buffer is a piece of NFP memory where additional
command data can be placed.  Its format has been copied from
host buffer, but the PCIe selection bits do not make sense in
this case.  If those get masked out from a NFP address - writes
to random place in the chip memory may be issued and crash the
device.

This has never been an issue because the buffer used to be
allocated in memory with less-than-38-bit-long address but that
is about to change.

Signed-off-by: Dirk van der Merwe <redacted>
Signed-off-by: Jakub Kicinski <redacted>
---
 drivers/net/ethernet/netronome/nfp/nfpcore/nfp_nsp.c | 3 +--
 1 file changed, 1 insertion(+), 2 deletions(-)

diff --git a/drivers/net/ethernet/netronome/nfp/nfpcore/nfp_nsp.c b/drivers/net/ethernet/netronome/nfp/nfpcore/nfp_nsp.c
index 39abac678b71..b54ab02f5b33 100644
--- a/drivers/net/ethernet/netronome/nfp/nfpcore/nfp_nsp.c
+++ b/drivers/net/ethernet/netronome/nfp/nfpcore/nfp_nsp.c

@@ -71,8 +71,7 @@
 /* CPP address to retrieve the data from */
 #define NSP_BUFFER		0x10
 #define   NSP_BUFFER_CPP	GENMASK_ULL(63, 40)
-#define   NSP_BUFFER_PCIE	GENMASK_ULL(39, 38)
-#define   NSP_BUFFER_ADDRESS	GENMASK_ULL(37, 0)
+#define   NSP_BUFFER_ADDRESS	GENMASK_ULL(39, 0)