pull-request: can 2017-12-01

Hello David,

this is a pull for net consisting of nine patches.

The first three patches are by Jimmy Assarsson for the kvaser_usb driver
and add the missing free()s in some error path, a signed/unsigned
comparison and ratelimit the error messages in case of incomplete
messages. Oliver Stäbler's patch for the ti_hecc driver fix the napi
poll function's return value. The return values of the probe function of
the peak_canfd and peak_pci PCI drivers are fixed by Stephane Grosjean's
patch. Two patches by me for the flexcan driver update the
bugs/features/quirks overview table and fix the error state transition
for the VF610 SoC. The two patches by Martin Kelly for the mcba_usb
driver fix a typo and a device disconnect bug.

regards,
Marc

---

The following changes since commit 6fef90c6b3f6a2b52018e66c0886944ea0c03fcc:

  net: dsa: bcm_sf2: Set correct CHAIN_ID and slice number mask (2017-11-30 14:21:35 -0500)

are available in the Git repository at:

  git://git.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can.git tags/linux-can-fixes-for-4.15-20171201

for you to fetch changes up to 1cb35a33a28394fd711bb26ddf3a564f4e9d9125:

  can: mcba_usb: fix device disconnect bug (2017-12-01 11:27:14 +0100)

----------------------------------------------------------------
linux-can-fixes-for-4.15-20171201

----------------------------------------------------------------
Jimmy Assarsson (3):
      can: kvaser_usb: free buf in error paths
      can: kvaser_usb: Fix comparison bug in kvaser_usb_read_bulk_callback()
      can: kvaser_usb: ratelimit errors if incomplete messages are received

22 more lines

From: Jimmy Assarsson <redacted>

The allocated buffer was not freed if usb_submit_urb() failed.

Signed-off-by: Jimmy Assarsson <redacted>
Cc: linux-stable <redacted>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
---
 drivers/net/can/usb/kvaser_usb.c | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/drivers/net/can/usb/kvaser_usb.c b/drivers/net/can/usb/kvaser_usb.c
index 9b18d96ef526..075644591498 100644
--- a/drivers/net/can/usb/kvaser_usb.c
+++ b/drivers/net/can/usb/kvaser_usb.c

@@ -813,6 +813,7 @@ static int kvaser_usb_simple_msg_async(struct kvaser_usb_net_priv *priv,
 	if (err) {
 		netdev_err(netdev, "Error transmitting URB\n");
 		usb_unanchor_urb(urb);
+		kfree(buf);
 		usb_free_urb(urb);
 		return err;
 	}

@@ -1768,6 +1769,7 @@ static netdev_tx_t kvaser_usb_start_xmit(struct sk_buff *skb,
 		spin_unlock_irqrestore(&priv->tx_contexts_lock, flags);
 
 		usb_unanchor_urb(urb);
+		kfree(buf);
 
 		stats->tx_dropped++;
 

-- 
2.15.0

From: Jimmy Assarsson <redacted>

The conditon in the while-loop becomes true when actual_length is less than
2 (MSG_HEADER_LEN). In best case we end up with a former, already
dispatched msg, that got msg->len greater than actual_length. This will
result in a "Format error" error printout.

Problem seen when unplugging a Kvaser USB device connected to a vbox guest.

warning: comparison between signed and unsigned integer expressions
[-Wsign-compare]

Signed-off-by: Jimmy Assarsson <redacted>
Cc: linux-stable <redacted>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
---
 drivers/net/can/usb/kvaser_usb.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/net/can/usb/kvaser_usb.c b/drivers/net/can/usb/kvaser_usb.c
index 075644591498..d87e330a20b3 100644
--- a/drivers/net/can/usb/kvaser_usb.c
+++ b/drivers/net/can/usb/kvaser_usb.c

@@ -1334,7 +1334,7 @@ static void kvaser_usb_read_bulk_callback(struct urb *urb)
 		goto resubmit_urb;
 	}
 
-	while (pos <= urb->actual_length - MSG_HEADER_LEN) {
+	while (pos <= (int)(urb->actual_length - MSG_HEADER_LEN)) {
 		msg = urb->transfer_buffer + pos;
 
 		/* The Kvaser firmware can only read and write messages that

-- 
2.15.0

From: Jimmy Assarsson <redacted>

Avoid flooding the kernel log with "Formate error", if incomplete message
are received.

Signed-off-by: Jimmy Assarsson <redacted>
Cc: linux-stable <redacted>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
---
 drivers/net/can/usb/kvaser_usb.c | 7 ++++---
 1 file changed, 4 insertions(+), 3 deletions(-)

diff --git a/drivers/net/can/usb/kvaser_usb.c b/drivers/net/can/usb/kvaser_usb.c
index d87e330a20b3..f95945915d20 100644
--- a/drivers/net/can/usb/kvaser_usb.c
+++ b/drivers/net/can/usb/kvaser_usb.c

@@ -609,8 +609,8 @@ static int kvaser_usb_wait_msg(const struct kvaser_usb *dev, u8 id,
 			}
 
 			if (pos + tmp->len > actual_len) {
-				dev_err(dev->udev->dev.parent,
-					"Format error\n");
+				dev_err_ratelimited(dev->udev->dev.parent,
+						    "Format error\n");
 				break;
 			}
 

@@ -1353,7 +1353,8 @@ static void kvaser_usb_read_bulk_callback(struct urb *urb)
 		}
 
 		if (pos + msg->len > urb->actual_length) {
-			dev_err(dev->udev->dev.parent, "Format error\n");
+			dev_err_ratelimited(dev->udev->dev.parent,
+					    "Format error\n");
 			break;
 		}
 

-- 
2.15.0

From: Oliver Stäbler <redacted>

After commit d75b1ade567f ("net: less interrupt masking in NAPI") napi
repoll is done only when work_done == budget.
So we need to return budget if there are still packets to receive.

Signed-off-by: Oliver Stäbler <redacted>
Cc: linux-stable <redacted>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
---
 drivers/net/can/ti_hecc.c | 3 +++
 1 file changed, 3 insertions(+)

diff --git a/drivers/net/can/ti_hecc.c b/drivers/net/can/ti_hecc.c
index 4d4941469cfc..db6ea936dc3f 100644
--- a/drivers/net/can/ti_hecc.c
+++ b/drivers/net/can/ti_hecc.c

@@ -637,6 +637,9 @@ static int ti_hecc_rx_poll(struct napi_struct *napi, int quota)
 		mbx_mask = hecc_read(priv, HECC_CANMIM);
 		mbx_mask |= HECC_TX_MBOX_MASK;
 		hecc_write(priv, HECC_CANMIM, mbx_mask);
+	} else {
+		/* repoll is done only if whole budget is used */
+		num_pkts = quota;
 	}
 
 	return num_pkts;

-- 
2.15.0

From: Stephane Grosjean <redacted>

PCI/PCIe drivers for PEAK-System CAN/CAN-FD interfaces do some access to the
PCI config during probing. In case one of these accesses fails, a POSITIVE
PCIBIOS_xxx error code is returned back. This POSITIVE error code MUST be
converted into a NEGATIVE errno for the probe() function to indicate it
failed. Using the pcibios_err_to_errno() function, we make sure that the
return code will always be negative.

Signed-off-by: Stephane Grosjean <redacted>
Cc: linux-stable <redacted>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
---
 drivers/net/can/peak_canfd/peak_pciefd_main.c | 5 ++++-
 drivers/net/can/sja1000/peak_pci.c            | 5 ++++-
 2 files changed, 8 insertions(+), 2 deletions(-)

diff --git a/drivers/net/can/peak_canfd/peak_pciefd_main.c b/drivers/net/can/peak_canfd/peak_pciefd_main.c
index b4efd711f824..788c3464a3b0 100644
--- a/drivers/net/can/peak_canfd/peak_pciefd_main.c
+++ b/drivers/net/can/peak_canfd/peak_pciefd_main.c

@@ -825,7 +825,10 @@ static int peak_pciefd_probe(struct pci_dev *pdev,
 err_disable_pci:
 	pci_disable_device(pdev);
 
-	return err;
+	/* pci_xxx_config_word() return positive PCIBIOS_xxx error codes while
+	 * the probe() function must return a negative errno in case of failure
+	 * (err is unchanged if negative) */
+	return pcibios_err_to_errno(err);
 }
 
 /* free the board structure object, as well as its resources: */

diff --git a/drivers/net/can/sja1000/peak_pci.c b/drivers/net/can/sja1000/peak_pci.c
index 131026fbc2d7..5adc95c922ee 100644
--- a/drivers/net/can/sja1000/peak_pci.c
+++ b/drivers/net/can/sja1000/peak_pci.c

@@ -717,7 +717,10 @@ static int peak_pci_probe(struct pci_dev *pdev, const struct pci_device_id *ent)
 failure_disable_pci:
 	pci_disable_device(pdev);
 
-	return err;
+	/* pci_xxx_config_word() return positive PCIBIOS_xxx error codes while
+	 * the probe() function must return a negative errno in case of failure
+	 * (err is unchanged if negative) */
+	return pcibios_err_to_errno(err);
 }
 
 static void peak_pci_remove(struct pci_dev *pdev)

-- 
2.15.0

The flexcan IP cores used on MX25 and MX35 do not generate Error Passive
IRQs. Update the IP core overview table in the driver accordingly.

Suggested-by: ZHU Yi (ST-FIR/ENG1-Zhu) <redacted>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
---
 drivers/net/can/flexcan.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/net/can/flexcan.c b/drivers/net/can/flexcan.c
index a13a4896a8bd..eefddae2e99a 100644
--- a/drivers/net/can/flexcan.c
+++ b/drivers/net/can/flexcan.c

@@ -184,9 +184,9 @@
  * Below is some version info we got:
  *    SOC   Version   IP-Version  Glitch- [TR]WRN_INT IRQ Err Memory err RTR re-
  *                                Filter? connected?  Passive detection  ception in MB
- *   MX25  FlexCAN2  03.00.00.00     no        no         ?       no        no
+ *   MX25  FlexCAN2  03.00.00.00     no        no        no       no        no
  *   MX28  FlexCAN2  03.00.04.00    yes       yes        no       no        no
- *   MX35  FlexCAN2  03.00.00.00     no        no         ?       no        no
+ *   MX35  FlexCAN2  03.00.00.00     no        no        no       no        no
  *   MX53  FlexCAN2  03.00.00.00    yes        no        no       no        no
  *   MX6s  FlexCAN3  10.00.12.00    yes       yes        no       no       yes
  *   VF610 FlexCAN3  ?               no       yes         ?      yes       yes?

-- 
2.15.0

Enable FLEXCAN_QUIRK_BROKEN_PERR_STATE for VF610 to report correct state
transitions.

Tested-by: Mirza Krak <redacted>
Cc: linux-stable <redacted> # >= v4.11
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
---
 drivers/net/can/flexcan.c | 5 +++--
 1 file changed, 3 insertions(+), 2 deletions(-)

diff --git a/drivers/net/can/flexcan.c b/drivers/net/can/flexcan.c
index eefddae2e99a..0626dcfd1f3d 100644
--- a/drivers/net/can/flexcan.c
+++ b/drivers/net/can/flexcan.c

@@ -189,7 +189,7 @@
  *   MX35  FlexCAN2  03.00.00.00     no        no        no       no        no
  *   MX53  FlexCAN2  03.00.00.00    yes        no        no       no        no
  *   MX6s  FlexCAN3  10.00.12.00    yes       yes        no       no       yes
- *   VF610 FlexCAN3  ?               no       yes         ?      yes       yes?
+ *   VF610 FlexCAN3  ?               no       yes        no      yes       yes?
  *
  * Some SOCs do not have the RX_WARN & TX_WARN interrupt line connected.
  */

@@ -297,7 +297,8 @@ static const struct flexcan_devtype_data fsl_imx6q_devtype_data = {
 
 static const struct flexcan_devtype_data fsl_vf610_devtype_data = {
 	.quirks = FLEXCAN_QUIRK_DISABLE_RXFG | FLEXCAN_QUIRK_ENABLE_EACEN_RRS |
-		FLEXCAN_QUIRK_DISABLE_MECR | FLEXCAN_QUIRK_USE_OFF_TIMESTAMP,
+		FLEXCAN_QUIRK_DISABLE_MECR | FLEXCAN_QUIRK_USE_OFF_TIMESTAMP |
+		FLEXCAN_QUIRK_BROKEN_PERR_STATE,
 };
 
 static const struct can_bittiming_const flexcan_bittiming_const = {

-- 
2.15.0

From: Martin Kelly <redacted>

Fix typo "analizer" --> "Analyzer".

Signed-off-by: Martin Kelly <redacted>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
---
 drivers/net/can/usb/mcba_usb.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/net/can/usb/mcba_usb.c b/drivers/net/can/usb/mcba_usb.c
index 7f0272558bef..c4355f0a20d5 100644
--- a/drivers/net/can/usb/mcba_usb.c
+++ b/drivers/net/can/usb/mcba_usb.c

@@ -862,7 +862,7 @@ static int mcba_usb_probe(struct usb_interface *intf,
 		goto cleanup_unregister_candev;
 	}
 
-	dev_info(&intf->dev, "Microchip CAN BUS analizer connected\n");
+	dev_info(&intf->dev, "Microchip CAN BUS Analyzer connected\n");
 
 	return 0;
 

-- 
2.15.0

From: Martin Kelly <redacted>

Currently, when you disconnect the device, the driver infinitely
resubmits all URBs, so you see:

Rx URB aborted (-32)

in an infinite loop.

Fix this by catching -EPIPE (what we get in urb->status when the device
disconnects) and not resubmitting.

With this patch, I can plug and unplug many times and the driver
recovers correctly.

Signed-off-by: Martin Kelly <redacted>
Cc: linux-stable <redacted>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
---
 drivers/net/can/usb/mcba_usb.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/drivers/net/can/usb/mcba_usb.c b/drivers/net/can/usb/mcba_usb.c
index c4355f0a20d5..ef417dcddbf7 100644
--- a/drivers/net/can/usb/mcba_usb.c
+++ b/drivers/net/can/usb/mcba_usb.c

@@ -592,6 +592,7 @@ static void mcba_usb_read_bulk_callback(struct urb *urb)
 		break;
 
 	case -ENOENT:
+	case -EPIPE:
 	case -ESHUTDOWN:
 		return;
 

-- 
2.15.0

From: Marc Kleine-Budde <mkl@pengutronix.de>
Date: Fri,  1 Dec 2017 15:17:30 +0100

this is a pull for net consisting of nine patches.

The first three patches are by Jimmy Assarsson for the kvaser_usb driver
and add the missing free()s in some error path, a signed/unsigned
comparison and ratelimit the error messages in case of incomplete
messages. Oliver Stäbler's patch for the ti_hecc driver fix the napi
poll function's return value. The return values of the probe function of
the peak_canfd and peak_pci PCI drivers are fixed by Stephane Grosjean's
patch. Two patches by me for the flexcan driver update the
bugs/features/quirks overview table and fix the error state transition
for the VF610 SoC. The two patches by Martin Kelly for the mcba_usb
driver fix a typo and a device disconnect bug.

Pulled, thanks Marc.