[PATCHv3 0/3] Socionext Synquacer NETSEC driver

From: Jassi Brar <redacted>

Hi,

Changes since v2
	# Use 'mdio' subnode in DT bindings.
	# Use phy_interface_mode_is_rgmii(), instead of open coding the check.
	# Use readl/b with eeprom_base pointer.
	# Unregister mdio bus upon failure in probe.

Changes since v1
	# Switched from using memremap to ioremap
	# Implemented ndo_do_ioctl callback
	# Defined optional 'dma-coherent' DT property

Jassi Brar (3):
  dt-bindings: net: Add DT bindings for Socionext Netsec
  net: socionext: Add Synquacer NetSec driver
  MAINTAINERS: Add entry for Socionext ethernet driver

 .../devicetree/bindings/net/socionext-netsec.txt   |   55 +
 MAINTAINERS                                        |    7 +
 drivers/net/ethernet/Kconfig                       |    1 +
 drivers/net/ethernet/Makefile                      |    1 +
 drivers/net/ethernet/socionext/Kconfig             |   29 +
 drivers/net/ethernet/socionext/Makefile            |    1 +
 drivers/net/ethernet/socionext/netsec.c            | 1849 ++++++++++++++++++++
 7 files changed, 1943 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/net/socionext-netsec.txt
 create mode 100644 drivers/net/ethernet/socionext/Kconfig
 create mode 100644 drivers/net/ethernet/socionext/Makefile
 create mode 100644 drivers/net/ethernet/socionext/netsec.c

-- 
2.7.4

--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html