[PATCH net] phylink: ensure AN is enabled

Ensure that we mark AN as enabled at boot time, rather than leaving
it disabled.  This is noticable if your SFP module is fiber, and you
it supports faster speeds than 1G with 2.5G support in place.

Signed-off-by: Russell King <redacted>
---
 drivers/net/phy/phylink.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/drivers/net/phy/phylink.c b/drivers/net/phy/phylink.c
index e30339fca5cf..db5d5726ced9 100644
--- a/drivers/net/phy/phylink.c
+++ b/drivers/net/phy/phylink.c

@@ -567,6 +567,7 @@ struct phylink *phylink_create(struct net_device *ndev,
 	pl->link_config.pause = MLO_PAUSE_AN;
 	pl->link_config.speed = SPEED_UNKNOWN;
 	pl->link_config.duplex = DUPLEX_UNKNOWN;
+	pl->link_config.an_enabled = true;
 	pl->ops = ops;
 	__set_bit(PHYLINK_DISABLE_STOPPED, &pl->phylink_disable_state);
 

-- 
2.7.4

Le 12/20/17 à 15:21, Russell King a écrit :

Ensure that we mark AN as enabled at boot time, rather than leaving
it disabled.  This is noticable if your SFP module is fiber, and you
it supports faster speeds than 1G with 2.5G support in place.

(not worth a respin IMHO), s/you //?

Signed-off-by: Russell King <redacted>

Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Fixes: 9525ae83959b ("phylink: add phylink infrastructure")
-- 
Florian

From: Russell King <redacted>
Date: Wed, 20 Dec 2017 23:21:34 +0000

Ensure that we mark AN as enabled at boot time, rather than leaving
it disabled.  This is noticable if your SFP module is fiber, and you
it supports faster speeds than 1G with 2.5G support in place.

Signed-off-by: Russell King <redacted>

Also applied, and both of these phlink fixes are queued up for -stable
as well.