This patchset fixes some bugs reported by Hisilicon test team.
Lipeng (4):
net: hns3: fix the bug of hns3_set_txbd_baseinfo
net: hns3: add nic_client check when initialize roce base information
net: hns3: fix a bug in hclge_uninit_client_instance
net: hns3: fix the bug when reuse command description in
hclge_add_mac_vlan_tbl
.../net/ethernet/hisilicon/hns3/hns3pf/hclge_main.c | 18 ++++++++++++------
drivers/net/ethernet/hisilicon/hns3/hns3pf/hns3_enet.c | 2 +-
2 files changed, 13 insertions(+), 7 deletions(-)
--
1.9.1
Roce driver works base on HNS3 driver.If insmod Roce driver before
NIC driver there is a error because do not check nic_client. This patch
adds nic_client check when initialize roce base information.
Fixes: 46a3df9 (net: hns3: Add HNS3 Acceleration Engine & Compatibility Layer Support)
Signed-off-by: Lipeng <redacted>
---
drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_main.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
HNS3 driver initialize hdev->roce_client and vport->roce.client in
hclge_init_client_instance, and need set hdev->roce_client and
vport->roce.client NULL.
If do not set them NULL when uninit, it will fail in the scene:
insmod hns3.ko, hns-roce.ko, hns-roce-hw-v3.ko successfully, but
rmmod hns3.ko after rmmod hns-roce-hw-v2.ko and hns-roce.ko.
This patch fixes the issue.
Fixes: 46a3df9 (net: hns3: Add HNS3 Acceleration Engine & Compatibility Layer Support)
Signed-off-by: Lipeng <redacted>
---
drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_main.c | 10 ++++++++--
1 file changed, 8 insertions(+), 2 deletions(-)
When reusing a command description read from HW, driver should set
IN_VLD bit, WR bit and NO_INTR bit. If IN_VLD bit and NO_INTR bit
are not set, the command fails and driver prints error message:
[ 135.261284] hns3 0000:7d:00.0: cmdq execute failed for get_mac_vlan_cmd_status,status=2.
[ 135.270983] hns3 0000:7d:00.0: add mac addr failed for cmd_send, ret =-5.
This patch fixes the bug.
Fixes: 46a3df9 (net: hns3: Add HNS3 Acceleration Engine & Compatibility Layer Support)
Signed-off-by: Lipeng <redacted>
---
drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_main.c | 6 +++---
1 file changed, 3 insertions(+), 3 deletions(-)
The SC bits of TX BD mean switch control. For this area, value 0
indicates no switch control, the packet is routed according to the
forwarding table. Value 1 indicates that the packet is transmitted
to the network bypassing the forwarding table.
As HNS3 driver need support VF later, VF conmunicate with its own
PF need forwarding table. This patch sets SC bits of TX BD 0 and use
forwarding table.
Fixes: 76ad4f0 (net: hns3: Add support of HNS3 Ethernet Driver for hip08 SoC)
Signed-off-by: Lipeng <redacted>
---
drivers/net/ethernet/hisilicon/hns3/hns3pf/hns3_enet.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)