DORMANTno replies

[PATCH v2] ethernet: cavium: octeon: Switch to using netdev_info().

From: Steven J. Hill <hidden>
Date: 2017-10-24 17:11:23
Subsystem: networking drivers, the rest · Maintainers: Andrew Lunn, "David S. Miller", Eric Dumazet, Jakub Kicinski, Paolo Abeni, Linus Torvalds

Signed-off-by: Steven J. Hill <redacted>
Signed-off-by: David Daney <redacted>
---
 drivers/net/ethernet/cavium/octeon/octeon_mgmt.c | 27 +++++++++++-------------
 1 file changed, 12 insertions(+), 15 deletions(-)
diff --git a/drivers/net/ethernet/cavium/octeon/octeon_mgmt.c b/drivers/net/ethernet/cavium/octeon/octeon_mgmt.c
index 2887bca..28e10dc 100644
--- a/drivers/net/ethernet/cavium/octeon/octeon_mgmt.c
+++ b/drivers/net/ethernet/cavium/octeon/octeon_mgmt.c
@@ -705,14 +705,15 @@ static int octeon_mgmt_ioctl_hwtstamp(struct net_device *netdev,
 			u64 clock_comp = (NSEC_PER_SEC << 32) /	octeon_get_io_clock_rate();
 			if (!ptp.s.ptp_en)
 				cvmx_write_csr(CVMX_MIO_PTP_CLOCK_COMP, clock_comp);
-			pr_info("PTP Clock: Using sclk reference at %lld Hz\n",
-				(NSEC_PER_SEC << 32) / clock_comp);
+			netdev_info(netdev,
+				    "PTP Clock using sclk reference @ %lldHz\n",
+				    (NSEC_PER_SEC << 32) / clock_comp);
 		} else {
 			/* The clock is already programmed to use a GPIO */
 			u64 clock_comp = cvmx_read_csr(CVMX_MIO_PTP_CLOCK_COMP);
-			pr_info("PTP Clock: Using GPIO %d at %lld Hz\n",
-				ptp.s.ext_clk_in,
-				(NSEC_PER_SEC << 32) / clock_comp);
+			netdev_info(netdev,
+				    "PTP Clock using GPIO%d @ %lld Hz\n",
+				    ptp.s.ext_clk_in, (NSEC_PER_SEC << 32) / clock_comp);
 		}
 
 		/* Enable the clock if it wasn't done already */
@@ -925,16 +926,12 @@ static void octeon_mgmt_adjust_link(struct net_device *netdev)
 
 	spin_unlock_irqrestore(&p->lock, flags);
 
-	if (link_changed != 0) {
-		if (link_changed > 0) {
-			pr_info("%s: Link is up - %d/%s\n", netdev->name,
-				phydev->speed,
-				phydev->duplex == DUPLEX_FULL ?
-				"Full" : "Half");
-		} else {
-			pr_info("%s: Link is down\n", netdev->name);
-		}
-	}
+	if (link_changed != 0)
+		if (link_changed > 0)
+			netdev_info(netdev, "Link is up - %d/%s\n",
+				    phydev->speed, phydev->duplex == DUPLEX_FULL ? "Full" : "Half");
+		else
+			netdev_info(netdev, "Link is down\n");
 }
 
 static int octeon_mgmt_init_phy(struct net_device *netdev)
-- 
2.1.4
Keyboard shortcuts
hback out one level
jnext message in thread
kprevious message in thread
ldrill in
Escclose help / fold thread tree
?toggle this help