[PATCH] net: ethernet: aquantia: default to no in config

NET_VENDOR_AQUANTIA was "default y" for some reason, which seems
obviously inappropriate.
---
 drivers/net/ethernet/aquantia/Kconfig | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/net/ethernet/aquantia/Kconfig b/drivers/net/ethernet/aquantia/Kconfig
index cdf78e069a39..6167b13cf349 100644
--- a/drivers/net/ethernet/aquantia/Kconfig
+++ b/drivers/net/ethernet/aquantia/Kconfig

@@ -4,7 +4,7 @@
 
 config NET_VENDOR_AQUANTIA
 	bool "aQuantia devices"
-	default y
+	default n
 	---help---
 	  Set this to y if you have an Ethernet network cards that uses the aQuantia
 	  AQC107/AQC108 chipset.

-- 
2.11.0

From: Vito Caputo <redacted>
Date: Tue, 19 Sep 2017 15:43:15 -0700

NET_VENDOR_AQUANTIA was "default y" for some reason, which seems
obviously inappropriate.

It is appropriate.

We make all vendor guards default to yes.

On Tue, Sep 19, 2017 at 03:52:31PM -0700, David Miller wrote:

From: Vito Caputo <redacted>
Date: Tue, 19 Sep 2017 15:43:15 -0700

quoted

NET_VENDOR_AQUANTIA was "default y" for some reason, which seems
obviously inappropriate.

It is appropriate.

We make all vendor guards default to yes.

Thanks for the quick response.

Out of curiosity, what's the rationale for that decision?

From: vcaputo@pengaru.com
Date: Tue, 19 Sep 2017 16:02:49 -0700

Out of curiosity, what's the rationale for that decision?

So that you don't need to know what special vendor knob needs to be
switched in order to even be offered the config knob for the driver
you are interested in.

Hello!

On 9/20/2017 1:43 AM, Vito Caputo wrote:

    Just remove it -- 'n' is the default default. :-)

[...]

MBR, Sergei