[PATCH net] smsc95xx: Configure pause time to 0xffff when tx flow control enabled

Subsystems: networking drivers, the rest, usb networking drivers, usb smsc95xx ethernet driver

STALE3284d

3 messages, 2 authors, 2017-09-08 · open the first message on its own page

[PATCH net] smsc95xx: Configure pause time to 0xffff when tx flow control enabled

From: <hidden>
Date: 2017-09-07 06:52:23

From: Nisar Sayed <redacted>

Configure pause time to 0xffff when tx flow control enabled

Signed-off-by: Nisar Sayed <redacted>
---
 drivers/net/usb/smsc95xx.c | 11 +++++------
 1 file changed, 5 insertions(+), 6 deletions(-)
diff --git a/drivers/net/usb/smsc95xx.c b/drivers/net/usb/smsc95xx.c
index 340c134..309b88a 100644
--- a/drivers/net/usb/smsc95xx.c
+++ b/drivers/net/usb/smsc95xx.c
@@ -526,7 +526,7 @@ static void smsc95xx_set_multicast(struct net_device *netdev)
 static int smsc95xx_phy_update_flowcontrol(struct usbnet *dev, u8 duplex,
 					   u16 lcladv, u16 rmtadv)
 {
-	u32 flow, afc_cfg = 0;
+	u32 flow = 0, afc_cfg;
 
 	int ret = smsc95xx_read_reg(dev, AFC_CFG, &afc_cfg);
 	if (ret < 0)
@@ -537,20 +537,19 @@ static int smsc95xx_phy_update_flowcontrol(struct usbnet *dev, u8 duplex,
 
 		if (cap & FLOW_CTRL_RX)
 			flow = 0xFFFF0002;
-		else
-			flow = 0;
 
-		if (cap & FLOW_CTRL_TX)
+		if (cap & FLOW_CTRL_TX) {
 			afc_cfg |= 0xF;
-		else
+			flow |= 0xFFFF0000;
+		} else {
 			afc_cfg &= ~0xF;
+		}
 
 		netif_dbg(dev, link, dev->net, "rx pause %s, tx pause %s\n",
 				   cap & FLOW_CTRL_RX ? "enabled" : "disabled",
 				   cap & FLOW_CTRL_TX ? "enabled" : "disabled");
 	} else {
 		netif_dbg(dev, link, dev->net, "half duplex\n");
-		flow = 0;
 		afc_cfg |= 0xF;
 	}
 
-- 
1.9.1

Re: [PATCH net] smsc95xx: Configure pause time to 0xffff when tx flow control enabled

From: Andrew Lunn <andrew@lunn.ch>
Date: 2017-09-07 13:57:05

On Thu, Sep 07, 2017 at 06:51:37AM +0000, Nisar.Sayed@microchip.com wrote:
From: Nisar Sayed <redacted>

Configure pause time to 0xffff when tx flow control enabled
Hi Nisar

You should explain the 'Why' in the commit message. Why do we want a
pause time of 0xffff?

      Andrew

RE: [PATCH net] smsc95xx: Configure pause time to 0xffff when tx flow control enabled

From: <hidden>
Date: 2017-09-08 09:12:23

On Thu, Sep 07, 2017 at 06:51:37AM +0000, Nisar.Sayed@microchip.com
wrote:
quoted
From: Nisar Sayed <redacted>

Configure pause time to 0xffff when tx flow control enabled
Hi Nisar

You should explain the 'Why' in the commit message. Why do we want a
pause time of 0xffff?

      Andrew
Thanks Andrew,

I shall update the description and submit next version.

- Nisar
Keyboard shortcuts
hback out one level
jnext message in thread
kprevious message in thread
ldrill in
Escclose help / fold thread tree
?toggle this help