[PATCH net 4/4] lan78xx: Use default value loaded from EEPROM/OTP when resetting the chip
From: <hidden>
Date: 2017-09-06 10:52:16
Subsystem:
networking drivers, the rest, usb lan78xx ethernet driver, usb networking drivers · Maintainers:
Andrew Lunn, "David S. Miller", Eric Dumazet, Jakub Kicinski, Paolo Abeni, Linus Torvalds, Thangaraj Samynathan
From: Nisar Sayed <redacted> Use default value loaded from EEPROM/OTP when resetting the chip Signed-off-by: Nisar Sayed <redacted> --- drivers/net/usb/lan78xx.c | 1 - 1 file changed, 1 deletion(-)
diff --git a/drivers/net/usb/lan78xx.c b/drivers/net/usb/lan78xx.c
index e04ec23..84491e7 100644
--- a/drivers/net/usb/lan78xx.c
+++ b/drivers/net/usb/lan78xx.c@@ -2497,7 +2497,6 @@ static int lan78xx_reset(struct lan78xx_net *dev) /* LAN7801 only has RGMII mode */ if (dev->chipid == ID_REV_CHIP_ID_7801_) buf &= ~MAC_CR_GMII_EN_; - buf |= MAC_CR_AUTO_DUPLEX_ | MAC_CR_AUTO_SPEED_; ret = lan78xx_write_reg(dev, MAC_CR, buf); ret = lan78xx_read_reg(dev, MAC_TX, &buf);
--
1.9.1