[PATCH] net: stmmac: dwmac-sun8i: Use reset exclusive

Subsystems: networking drivers, stmmac ethernet driver, the rest

STALE3337d

5 messages, 2 authors, 2017-08-30 · open the first message on its own page

[PATCH] net: stmmac: dwmac-sun8i: Use reset exclusive

From: Corentin Labbe <clabbe.montjoie@gmail.com>
Date: 2017-08-25 14:40:24

The current dwmac_sun8i module cannot be rmmod/modprobe due to that
the reset controller was not released when removed.

This patch remove ambiguity, by using of_reset_control_get_exclusive and
add the missing reset_control_put().

Signed-off-by: Corentin Labbe <clabbe.montjoie@gmail.com>
---
 drivers/net/ethernet/stmicro/stmmac/dwmac-sun8i.c | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)
diff --git a/drivers/net/ethernet/stmicro/stmmac/dwmac-sun8i.c b/drivers/net/ethernet/stmicro/stmmac/dwmac-sun8i.c
index fffd6d5fc907..675a09629d85 100644
--- a/drivers/net/ethernet/stmicro/stmmac/dwmac-sun8i.c
+++ b/drivers/net/ethernet/stmicro/stmmac/dwmac-sun8i.c
@@ -782,6 +782,7 @@ static int sun8i_dwmac_unpower_internal_phy(struct sunxi_priv_data *gmac)
 
 	clk_disable_unprepare(gmac->ephy_clk);
 	reset_control_assert(gmac->rst_ephy);
+	reset_control_put(gmac->rst_ephy);
 	return 0;
 }
 
@@ -942,7 +943,7 @@ static int sun8i_dwmac_probe(struct platform_device *pdev)
 			return -EINVAL;
 		}
 
-		gmac->rst_ephy = of_reset_control_get(plat_dat->phy_node, NULL);
+		gmac->rst_ephy = of_reset_control_get_exclusive(plat_dat->phy_node, NULL);
 		if (IS_ERR(gmac->rst_ephy)) {
 			ret = PTR_ERR(gmac->rst_ephy);
 			if (ret == -EPROBE_DEFER)
-- 
2.13.5

Re: [PATCH] net: stmmac: dwmac-sun8i: Use reset exclusive

From: Maxime Ripard <hidden>
Date: 2017-08-25 14:48:45

On Fri, Aug 25, 2017 at 04:38:05PM +0200, Corentin Labbe wrote:
quoted hunk
The current dwmac_sun8i module cannot be rmmod/modprobe due to that
the reset controller was not released when removed.

This patch remove ambiguity, by using of_reset_control_get_exclusive and
add the missing reset_control_put().

Signed-off-by: Corentin Labbe <clabbe.montjoie@gmail.com>
---
 drivers/net/ethernet/stmicro/stmmac/dwmac-sun8i.c | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)
diff --git a/drivers/net/ethernet/stmicro/stmmac/dwmac-sun8i.c b/drivers/net/ethernet/stmicro/stmmac/dwmac-sun8i.c
index fffd6d5fc907..675a09629d85 100644
--- a/drivers/net/ethernet/stmicro/stmmac/dwmac-sun8i.c
+++ b/drivers/net/ethernet/stmicro/stmmac/dwmac-sun8i.c
@@ -782,6 +782,7 @@ static int sun8i_dwmac_unpower_internal_phy(struct sunxi_priv_data *gmac)
 
 	clk_disable_unprepare(gmac->ephy_clk);
 	reset_control_assert(gmac->rst_ephy);
+	reset_control_put(gmac->rst_ephy);
 	return 0;
 }
 
@@ -942,7 +943,7 @@ static int sun8i_dwmac_probe(struct platform_device *pdev)
 			return -EINVAL;
 		}
 
-		gmac->rst_ephy = of_reset_control_get(plat_dat->phy_node, NULL);
+		gmac->rst_ephy = of_reset_control_get_exclusive(plat_dat->phy_node, NULL);
Why not just use devm_reset_control_get?

Maxime

-- 
Maxime Ripard, Free Electrons
Embedded Linux and Kernel engineering
http://free-electrons.com

Re: [PATCH] net: stmmac: dwmac-sun8i: Use reset exclusive

From: Corentin Labbe <clabbe.montjoie@gmail.com>
Date: 2017-08-25 15:17:41

On Fri, Aug 25, 2017 at 04:48:32PM +0200, Maxime Ripard wrote:
On Fri, Aug 25, 2017 at 04:38:05PM +0200, Corentin Labbe wrote:
quoted
The current dwmac_sun8i module cannot be rmmod/modprobe due to that
the reset controller was not released when removed.

This patch remove ambiguity, by using of_reset_control_get_exclusive and
add the missing reset_control_put().

Signed-off-by: Corentin Labbe <clabbe.montjoie@gmail.com>
---
 drivers/net/ethernet/stmicro/stmmac/dwmac-sun8i.c | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)
diff --git a/drivers/net/ethernet/stmicro/stmmac/dwmac-sun8i.c b/drivers/net/ethernet/stmicro/stmmac/dwmac-sun8i.c
index fffd6d5fc907..675a09629d85 100644
--- a/drivers/net/ethernet/stmicro/stmmac/dwmac-sun8i.c
+++ b/drivers/net/ethernet/stmicro/stmmac/dwmac-sun8i.c
@@ -782,6 +782,7 @@ static int sun8i_dwmac_unpower_internal_phy(struct sunxi_priv_data *gmac)
 
 	clk_disable_unprepare(gmac->ephy_clk);
 	reset_control_assert(gmac->rst_ephy);
+	reset_control_put(gmac->rst_ephy);
 	return 0;
 }
 
@@ -942,7 +943,7 @@ static int sun8i_dwmac_probe(struct platform_device *pdev)
 			return -EINVAL;
 		}
 
-		gmac->rst_ephy = of_reset_control_get(plat_dat->phy_node, NULL);
+		gmac->rst_ephy = of_reset_control_get_exclusive(plat_dat->phy_node, NULL);
Why not just use devm_reset_control_get?
Because there no devm_ functions with of_

Regards

Re: [PATCH] net: stmmac: dwmac-sun8i: Use reset exclusive

From: Maxime Ripard <hidden>
Date: 2017-08-25 17:12:46

On Fri, Aug 25, 2017 at 05:17:33PM +0200, Corentin Labbe wrote:
On Fri, Aug 25, 2017 at 04:48:32PM +0200, Maxime Ripard wrote:
quoted
On Fri, Aug 25, 2017 at 04:38:05PM +0200, Corentin Labbe wrote:
quoted
The current dwmac_sun8i module cannot be rmmod/modprobe due to that
the reset controller was not released when removed.

This patch remove ambiguity, by using of_reset_control_get_exclusive and
add the missing reset_control_put().

Signed-off-by: Corentin Labbe <clabbe.montjoie@gmail.com>
---
 drivers/net/ethernet/stmicro/stmmac/dwmac-sun8i.c | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)
diff --git a/drivers/net/ethernet/stmicro/stmmac/dwmac-sun8i.c b/drivers/net/ethernet/stmicro/stmmac/dwmac-sun8i.c
index fffd6d5fc907..675a09629d85 100644
--- a/drivers/net/ethernet/stmicro/stmmac/dwmac-sun8i.c
+++ b/drivers/net/ethernet/stmicro/stmmac/dwmac-sun8i.c
@@ -782,6 +782,7 @@ static int sun8i_dwmac_unpower_internal_phy(struct sunxi_priv_data *gmac)
 
 	clk_disable_unprepare(gmac->ephy_clk);
 	reset_control_assert(gmac->rst_ephy);
+	reset_control_put(gmac->rst_ephy);
 	return 0;
 }
 
@@ -942,7 +943,7 @@ static int sun8i_dwmac_probe(struct platform_device *pdev)
 			return -EINVAL;
 		}
 
-		gmac->rst_ephy = of_reset_control_get(plat_dat->phy_node, NULL);
+		gmac->rst_ephy = of_reset_control_get_exclusive(plat_dat->phy_node, NULL);
Why not just use devm_reset_control_get?
Because there no devm_ functions with of_
devm_reset_control_get uses of_reset_control_get internally.

Maxime

-- 
Maxime Ripard, Free Electrons
Embedded Linux and Kernel engineering
http://free-electrons.com

Re: [PATCH] net: stmmac: dwmac-sun8i: Use reset exclusive

From: Corentin Labbe <clabbe.montjoie@gmail.com>
Date: 2017-08-30 10:22:29

On Fri, Aug 25, 2017 at 07:12:33PM +0200, Maxime Ripard wrote:
On Fri, Aug 25, 2017 at 05:17:33PM +0200, Corentin Labbe wrote:
quoted
On Fri, Aug 25, 2017 at 04:48:32PM +0200, Maxime Ripard wrote:
quoted
On Fri, Aug 25, 2017 at 04:38:05PM +0200, Corentin Labbe wrote:
quoted
The current dwmac_sun8i module cannot be rmmod/modprobe due to that
the reset controller was not released when removed.

This patch remove ambiguity, by using of_reset_control_get_exclusive and
add the missing reset_control_put().

Signed-off-by: Corentin Labbe <clabbe.montjoie@gmail.com>
---
 drivers/net/ethernet/stmicro/stmmac/dwmac-sun8i.c | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)
diff --git a/drivers/net/ethernet/stmicro/stmmac/dwmac-sun8i.c b/drivers/net/ethernet/stmicro/stmmac/dwmac-sun8i.c
index fffd6d5fc907..675a09629d85 100644
--- a/drivers/net/ethernet/stmicro/stmmac/dwmac-sun8i.c
+++ b/drivers/net/ethernet/stmicro/stmmac/dwmac-sun8i.c
@@ -782,6 +782,7 @@ static int sun8i_dwmac_unpower_internal_phy(struct sunxi_priv_data *gmac)
 
 	clk_disable_unprepare(gmac->ephy_clk);
 	reset_control_assert(gmac->rst_ephy);
+	reset_control_put(gmac->rst_ephy);
 	return 0;
 }
 
@@ -942,7 +943,7 @@ static int sun8i_dwmac_probe(struct platform_device *pdev)
 			return -EINVAL;
 		}
 
-		gmac->rst_ephy = of_reset_control_get(plat_dat->phy_node, NULL);
+		gmac->rst_ephy = of_reset_control_get_exclusive(plat_dat->phy_node, NULL);
Why not just use devm_reset_control_get?
Because there no devm_ functions with of_
devm_reset_control_get uses of_reset_control_get internally.
Hello

You are right.
But since the ephy reset is in a child node, devm_ does not find it.

Regards
Keyboard shortcuts
hback out one level
jnext message in thread
kprevious message in thread
ldrill in
Escclose help / fold thread tree
?toggle this help