[patch v2 0/2] Enable Mellanox switch device in I2C mode

The following patch set updates global to Mellanox Kconfig files to support
configuration of Mellanox Switch (mlxsw) without PCI and with I2C only.

Ohad Oz (2):
  Allow Mellanox switch devices to be configured if only I2C bus is set
  Change Kconfig description

 drivers/net/ethernet/mellanox/Kconfig | 5 +++--
 1 file changed, 3 insertions(+), 2 deletions(-)

-- 
2.1.4

This patch apply Mellanox network vendor which includes:
- Mellanox card devices: ConnectX-4, ConnectX-5 and Connect-IB cards.
- Mellanox switch device: SwitchX-2 Switch-IB, Spectrum.
Therefore rephrasing help.

Signed-off-by: Ohad Oz <redacted>
Acked-by: Leon Romanovsky <redacted>
---
v1->v2
Comments pointed out by Leon Romanovsky [off-list ref]
- Include RDMA as part of mlnx network devices.
- Rephrase change description
---
 drivers/net/ethernet/mellanox/Kconfig | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

diff --git a/drivers/net/ethernet/mellanox/Kconfig b/drivers/net/ethernet/mellanox/Kconfig
index 0949741..872548c 100644
--- a/drivers/net/ethernet/mellanox/Kconfig
+++ b/drivers/net/ethernet/mellanox/Kconfig

@@ -7,7 +7,8 @@ config NET_VENDOR_MELLANOX
 	default y
 	depends on PCI || I2C
 	---help---
-	  If you have a network (Ethernet) card belonging to this class, say Y.
+	  If you have a network (Ethernet or RDMA) device belonging to this
+	  class, say Y.
 
 	  Note that the answer to this question doesn't directly affect the
 	  kernel: saying N will just cause the configurator to skip all

-- 
2.1.4

Mellanox switches (mlxsw) supports I2C systems without PCI, in order to
give the ability to the users to use such functionality, there is need
to update Kconfig.

Signed-off-by: Ohad Oz <redacted>
Acked-by: Leon Romanovsky <redacted>
---
v1->v2
Comments pointed out by Leon Romanovsky [off-list ref]
- Rephrase change description.
---
 drivers/net/ethernet/mellanox/Kconfig | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/net/ethernet/mellanox/Kconfig b/drivers/net/ethernet/mellanox/Kconfig
index 84a2007..0949741 100644
--- a/drivers/net/ethernet/mellanox/Kconfig
+++ b/drivers/net/ethernet/mellanox/Kconfig

@@ -5,7 +5,7 @@
 config NET_VENDOR_MELLANOX
 	bool "Mellanox devices"
 	default y
-	depends on PCI
+	depends on PCI || I2C
 	---help---
 	  If you have a network (Ethernet) card belonging to this class, say Y.
 

-- 
2.1.4

Mon, Aug 14, 2017 at 05:38:21PM CEST, ohado@mellanox.com wrote:

Mellanox switches (mlxsw) supports I2C systems without PCI, in order to
give the ability to the users to use such functionality, there is need
to update Kconfig.

Signed-off-by: Ohad Oz <redacted>
Acked-by: Leon Romanovsky <redacted>

Acked-by: Jiri Pirko <redacted>

Mon, Aug 14, 2017 at 05:38:22PM CEST, ohado@mellanox.com wrote:

This patch apply Mellanox network vendor which includes:
- Mellanox card devices: ConnectX-4, ConnectX-5 and Connect-IB cards.
- Mellanox switch device: SwitchX-2 Switch-IB, Spectrum.
Therefore rephrasing help.

Signed-off-by: Ohad Oz <redacted>
Acked-by: Leon Romanovsky <redacted>

Acked-by: Jiri Pirko <redacted>

From: Ohad Oz <redacted>
Date: Mon, 14 Aug 2017 15:38:20 +0000

The following patch set updates global to Mellanox Kconfig files to support
configuration of Mellanox Switch (mlxsw) without PCI and with I2C only.

Series applied to net-next.