[PATCH net 0/4] mlx4 misc fixes

Hi Dave,

This patchset contains misc bug fixes from the team
to the mlx4 Core and Eth drivers.

Patch 1 by Inbar fixes a wrong ethtool indication for Wake-on-LAN.
The other 3 patches by Jack add a missing capability description,
and fixes the off-by-1 misalignment for the following capabilities
descriptions.

Series generated against net commit:
cc75f8514db6 samples/bpf: fix bpf tunnel cleanup

Thanks,
Tariq.


Inbar Karmy (1):
  net/mlx4_en: Fix wrong indication of Wake-on-LAN (WoL) support

Jack Morgenstein (3):
  net/mlx4_core: Fix sl_to_vl_change bit offset in flags2 dump
  net/mlx4_core: Fix namespace misalignment in QinQ VST support commit
  net/mlx4_core: Fixes missing capability bit in flags2 capability dump

 drivers/net/ethernet/mellanox/mlx4/en_ethtool.c | 15 ++++++++-------
 drivers/net/ethernet/mellanox/mlx4/fw.c         |  9 +++++++--
 drivers/net/ethernet/mellanox/mlx4/fw.h         |  1 +
 drivers/net/ethernet/mellanox/mlx4/main.c       |  2 ++
 include/linux/mlx4/device.h                     |  1 +
 5 files changed, 19 insertions(+), 9 deletions(-)

-- 
1.8.3.1

From: Jack Morgenstein <redacted>

The cited commit introduced the following new enum value in file
include/linux/mlx4/device.h:

    MLX4_DEV_CAP_FLAG2_SVLAN_BY_QP

However the value of MLX4_DEV_CAP_FLAG2_SVLAN_BY_QP needs to stay
consistent with the value used in another namespace in
function dump_dev_cap_flags2(), which is manually kept in sync.
The change here restores that consistency.

Fixes: 7c3d21c8153c ("net/mlx4_core: Preparation for VF vlan protocol 802.1ad")
Reported-by: Mukesh Kacker <redacted>
Signed-off-by: Jack Morgenstein <redacted>
Signed-off-by: Tariq Toukan <redacted>
---
 drivers/net/ethernet/mellanox/mlx4/fw.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/net/ethernet/mellanox/mlx4/fw.c b/drivers/net/ethernet/mellanox/mlx4/fw.c
index 009dd03466d6..7c9502bae1cc 100644
--- a/drivers/net/ethernet/mellanox/mlx4/fw.c
+++ b/drivers/net/ethernet/mellanox/mlx4/fw.c

@@ -159,7 +159,7 @@ static void dump_dev_cap_flags2(struct mlx4_dev *dev, u64 flags)
 		[32] = "Loopback source checks support",
 		[33] = "RoCEv2 support",
 		[34] = "DMFS Sniffer support (UC & MC)",
-		[35] = "QinQ VST mode support",
+		[36] = "QinQ VST mode support",
 		[37] = "sl to vl mapping table change event support",
 	};
 	int i;

-- 
1.8.3.1

From: Jack Morgenstein <redacted>

The index value in function dump_dev_cap_flags2() for outputting
"sl to vl mapping table change event support" needs to be
consistent with the value of the enumerated constant
MLX4_DEV_CAP_FLAG2_SL_TO_VL_CHANGE_EVENT defined in file
include/linux/mlx4_device.h

The change here restores that consistency.

Fixes: fd10ed8e6f42 ("IB/mlx4: Fix possible vl/sl field mismatch in LRH header in QP1 packets")
Reported-by: Mukesh Kacker <redacted>
Signed-off-by: Jack Morgenstein <redacted>
Signed-off-by: Tariq Toukan <redacted>
---
 drivers/net/ethernet/mellanox/mlx4/fw.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/net/ethernet/mellanox/mlx4/fw.c b/drivers/net/ethernet/mellanox/mlx4/fw.c
index c165f16623a9..009dd03466d6 100644
--- a/drivers/net/ethernet/mellanox/mlx4/fw.c
+++ b/drivers/net/ethernet/mellanox/mlx4/fw.c

@@ -160,7 +160,7 @@ static void dump_dev_cap_flags2(struct mlx4_dev *dev, u64 flags)
 		[33] = "RoCEv2 support",
 		[34] = "DMFS Sniffer support (UC & MC)",
 		[35] = "QinQ VST mode support",
-		[36] = "sl to vl mapping table change event support"
+		[37] = "sl to vl mapping table change event support",
 	};
 	int i;
 

-- 
1.8.3.1

From: Jack Morgenstein <redacted>

The cited commit introduced the following new enum value in file
include/linux/mlx4/device.h:

    QUERY_DEV_CAP_DIAG_RPRT_PER_PORT

However, it failed to introduce a corresponding entry in function
dump_dev_cap_flags2() for outputting a line in the message log
when this capability bit is set.

The change here fixes that omission.

Fixes: c7c122ed67e4 ("net/mlx4: Add diagnostic counters capability bit")
Reported-by: Mukesh Kacker <redacted>
Signed-off-by: Jack Morgenstein <redacted>
Signed-off-by: Tariq Toukan <redacted>
---
 drivers/net/ethernet/mellanox/mlx4/fw.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/drivers/net/ethernet/mellanox/mlx4/fw.c b/drivers/net/ethernet/mellanox/mlx4/fw.c
index 7c9502bae1cc..041c0ed65929 100644
--- a/drivers/net/ethernet/mellanox/mlx4/fw.c
+++ b/drivers/net/ethernet/mellanox/mlx4/fw.c

@@ -159,6 +159,7 @@ static void dump_dev_cap_flags2(struct mlx4_dev *dev, u64 flags)
 		[32] = "Loopback source checks support",
 		[33] = "RoCEv2 support",
 		[34] = "DMFS Sniffer support (UC & MC)",
+		[35] = "Diag counters per port",
 		[36] = "QinQ VST mode support",
 		[37] = "sl to vl mapping table change event support",
 	};

-- 
1.8.3.1

From: Inbar Karmy <redacted>

Currently when WoL is supported but disabled, ethtool reports:
"Supports Wake-on: d".
Fix the indication of Wol support, so that the indication
remains "g" all the time if the NIC supports WoL.

Tested:
As accepted, when NIC supports WoL- ethtool reports:
	Supports Wake-on: g
	Wake-on: d
when NIC doesn't support WoL- ethtool reports:
        Supports Wake-on: d
        Wake-on: d

Fixes: 14c07b1358ed ("mlx4: Wake on LAN support")
Signed-off-by: Inbar Karmy <redacted>
Signed-off-by: Tariq Toukan <redacted>
---
 drivers/net/ethernet/mellanox/mlx4/en_ethtool.c | 15 ++++++++-------
 drivers/net/ethernet/mellanox/mlx4/fw.c         |  4 ++++
 drivers/net/ethernet/mellanox/mlx4/fw.h         |  1 +
 drivers/net/ethernet/mellanox/mlx4/main.c       |  2 ++
 include/linux/mlx4/device.h                     |  1 +
 5 files changed, 16 insertions(+), 7 deletions(-)

diff --git a/drivers/net/ethernet/mellanox/mlx4/en_ethtool.c b/drivers/net/ethernet/mellanox/mlx4/en_ethtool.c
index c751a1d434ad..3d4e4a5d00d1 100644
--- a/drivers/net/ethernet/mellanox/mlx4/en_ethtool.c
+++ b/drivers/net/ethernet/mellanox/mlx4/en_ethtool.c

@@ -223,6 +223,7 @@ static void mlx4_en_get_wol(struct net_device *netdev,
 			    struct ethtool_wolinfo *wol)
 {
 	struct mlx4_en_priv *priv = netdev_priv(netdev);
+	struct mlx4_caps *caps = &priv->mdev->dev->caps;
 	int err = 0;
 	u64 config = 0;
 	u64 mask;

@@ -235,24 +236,24 @@ static void mlx4_en_get_wol(struct net_device *netdev,
 	mask = (priv->port == 1) ? MLX4_DEV_CAP_FLAG_WOL_PORT1 :
 		MLX4_DEV_CAP_FLAG_WOL_PORT2;
 
-	if (!(priv->mdev->dev->caps.flags & mask)) {
+	if (!(caps->flags & mask)) {
 		wol->supported = 0;
 		wol->wolopts = 0;
 		return;
 	}
 
+	if (caps->wol_port[priv->port])
+		wol->supported = WAKE_MAGIC;
+	else
+		wol->supported = 0;
+
 	err = mlx4_wol_read(priv->mdev->dev, &config, priv->port);
 	if (err) {
 		en_err(priv, "Failed to get WoL information\n");
 		return;
 	}
 
-	if (config & MLX4_EN_WOL_MAGIC)
-		wol->supported = WAKE_MAGIC;
-	else
-		wol->supported = 0;
-
-	if (config & MLX4_EN_WOL_ENABLED)
+	if ((config & MLX4_EN_WOL_ENABLED) && (config & MLX4_EN_WOL_MAGIC))
 		wol->wolopts = WAKE_MAGIC;
 	else
 		wol->wolopts = 0;

diff --git a/drivers/net/ethernet/mellanox/mlx4/fw.c b/drivers/net/ethernet/mellanox/mlx4/fw.c
index 37e84a59e751..c165f16623a9 100644
--- a/drivers/net/ethernet/mellanox/mlx4/fw.c
+++ b/drivers/net/ethernet/mellanox/mlx4/fw.c

@@ -764,6 +764,7 @@ int mlx4_QUERY_DEV_CAP(struct mlx4_dev *dev, struct mlx4_dev_cap *dev_cap)
 #define QUERY_DEV_CAP_CQ_TS_SUPPORT_OFFSET	0x3e
 #define QUERY_DEV_CAP_MAX_PKEY_OFFSET		0x3f
 #define QUERY_DEV_CAP_EXT_FLAGS_OFFSET		0x40
+#define QUERY_DEV_CAP_WOL_OFFSET		0x43
 #define QUERY_DEV_CAP_FLAGS_OFFSET		0x44
 #define QUERY_DEV_CAP_RSVD_UAR_OFFSET		0x48
 #define QUERY_DEV_CAP_UAR_SZ_OFFSET		0x49

@@ -920,6 +921,9 @@ int mlx4_QUERY_DEV_CAP(struct mlx4_dev *dev, struct mlx4_dev_cap *dev_cap)
 	MLX4_GET(ext_flags, outbox, QUERY_DEV_CAP_EXT_FLAGS_OFFSET);
 	MLX4_GET(flags, outbox, QUERY_DEV_CAP_FLAGS_OFFSET);
 	dev_cap->flags = flags | (u64)ext_flags << 32;
+	MLX4_GET(field, outbox, QUERY_DEV_CAP_WOL_OFFSET);
+	dev_cap->wol_port[1] = !!(field & 0x20);
+	dev_cap->wol_port[2] = !!(field & 0x40);
 	MLX4_GET(field, outbox, QUERY_DEV_CAP_RSVD_UAR_OFFSET);
 	dev_cap->reserved_uars = field >> 4;
 	MLX4_GET(field, outbox, QUERY_DEV_CAP_UAR_SZ_OFFSET);

diff --git a/drivers/net/ethernet/mellanox/mlx4/fw.h b/drivers/net/ethernet/mellanox/mlx4/fw.h
index 5343a0599253..b52ba01aa486 100644
--- a/drivers/net/ethernet/mellanox/mlx4/fw.h
+++ b/drivers/net/ethernet/mellanox/mlx4/fw.h

@@ -129,6 +129,7 @@ struct mlx4_dev_cap {
 	u32 dmfs_high_rate_qpn_range;
 	struct mlx4_rate_limit_caps rl_caps;
 	struct mlx4_port_cap port_cap[MLX4_MAX_PORTS + 1];
+	bool wol_port[MLX4_MAX_PORTS + 1];
 };
 
 struct mlx4_func_cap {

diff --git a/drivers/net/ethernet/mellanox/mlx4/main.c b/drivers/net/ethernet/mellanox/mlx4/main.c
index a27c9c13a36e..09b9bc17bce9 100644
--- a/drivers/net/ethernet/mellanox/mlx4/main.c
+++ b/drivers/net/ethernet/mellanox/mlx4/main.c

@@ -424,6 +424,8 @@ static int mlx4_dev_cap(struct mlx4_dev *dev, struct mlx4_dev_cap *dev_cap)
 	dev->caps.stat_rate_support  = dev_cap->stat_rate_support;
 	dev->caps.max_gso_sz	     = dev_cap->max_gso_sz;
 	dev->caps.max_rss_tbl_sz     = dev_cap->max_rss_tbl_sz;
+	dev->caps.wol_port[1]          = dev_cap->wol_port[1];
+	dev->caps.wol_port[2]          = dev_cap->wol_port[2];
 
 	/* Save uar page shift */
 	if (!mlx4_is_slave(dev)) {

diff --git a/include/linux/mlx4/device.h b/include/linux/mlx4/device.h
index aad5d81dfb44..b54517c05e9a 100644
--- a/include/linux/mlx4/device.h
+++ b/include/linux/mlx4/device.h

@@ -620,6 +620,7 @@ struct mlx4_caps {
 	u32			dmfs_high_rate_qpn_base;
 	u32			dmfs_high_rate_qpn_range;
 	u32			vf_caps;
+	bool			wol_port[MLX4_MAX_PORTS + 1];
 	struct mlx4_rate_limit_caps rl_caps;
 };
 

-- 
1.8.3.1

From: Tariq Toukan <redacted>
Date: Tue,  1 Aug 2017 16:43:42 +0300

This patchset contains misc bug fixes from the team
to the mlx4 Core and Eth drivers.

Patch 1 by Inbar fixes a wrong ethtool indication for Wake-on-LAN.
The other 3 patches by Jack add a missing capability description,
and fixes the off-by-1 misalignment for the following capabilities
descriptions.

Series generated against net commit:
cc75f8514db6 samples/bpf: fix bpf tunnel cleanup

Series applied, thanks!