Hello!
On 07/05/2017 06:56 PM, Biju Das wrote:
quoted hunk
The iWave RZ/G1M Q7 SOM supports Gigabit Ethernet Phy (Micrel KSZ9031MNX).
Gigabit Ethernet support is available in Renesas AVB driver.
To increase hardware support enable the driver in the shmobile_defconfig
multiplatform configuration.
Signed-off-by: Biju Das <biju.das-kTT6dE0pTRh9uiUsa/gSgQ@public.gmane.org>
Reviewed-by: Chris Paterson <redacted>
Acked-by: Geert Uytterhoeven <redacted>
---
arch/arm/configs/shmobile_defconfig | 1 +
1 file changed, 1 insertion(+)
diff --git a/arch/arm/configs/shmobile_defconfig b/arch/arm/configs/shmobile_defconfig
index 3c66a42..d992911 100644
--- a/arch/arm/configs/shmobile_defconfig
+++ b/arch/arm/configs/shmobile_defconfig
@@ -83,6 +83,7 @@ CONFIG_NETDEVICES=y
# CONFIG_NET_VENDOR_MICREL is not set
# CONFIG_NET_VENDOR_NATSEMI is not set
CONFIG_SH_ETH=y
+CONFIG_RAVB=y
Hm, I would enable it only as a module, given it's not easy to make use of
AVB on the 32-bit boards.
[...]
MBR Sergei
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Hello Sergei,
Thank you for your comments.
From: Sergei Shtylyov [mailto:sergei.shtylyov@cogentembedded.com]
Sent: 05 July 2017 17:14
Hello!
On 07/05/2017 06:56 PM, Biju Das wrote:
quoted
The iWave RZ/G1M Q7 SOM supports Gigabit Ethernet Phy (Micrel
KSZ9031MNX).
quoted
Gigabit Ethernet support is available in Renesas AVB driver.
To increase hardware support enable the driver in the
shmobile_defconfig multiplatform configuration.
Signed-off-by: Biju Das <redacted>
Reviewed-by: Chris Paterson <redacted>
Acked-by: Geert Uytterhoeven <geert+renesas@glider.be>
---
arch/arm/configs/shmobile_defconfig | 1 +
1 file changed, 1 insertion(+)
diff --git a/arch/arm/configs/shmobile_defconfig
b/arch/arm/configs/shmobile_defconfig
index 3c66a42..d992911 100644
--- a/arch/arm/configs/shmobile_defconfig
+++ b/arch/arm/configs/shmobile_defconfig
@@ -83,6 +83,7 @@ CONFIG_NETDEVICES=y
# CONFIG_NET_VENDOR_MICREL is not set #
CONFIG_NET_VENDOR_NATSEMI is
quoted
not set CONFIG_SH_ETH=y
+CONFIG_RAVB=y
Hm, I would enable it only as a module, given it's not easy to make use of
AVB on the 32-bit boards.
On the iWave-M platforms the only available Ethernet interface is AVB. Without including the RAVB driver in the Kernel we won't be able to use NFS.
I know adding CONFIG_RAVB for all shmobile devices may increase the Kernel size for everyone, especially when most cannot use AVB without an add-on board, but I don't think the increase will be big.
Kind regards, Chris
[...]
MBR Sergei
On Thu, Jul 06, 2017 at 08:05:43AM +0000, Chris Paterson wrote:
Hello Sergei,
Thank you for your comments.
quoted
From: Sergei Shtylyov [mailto:sergei.shtylyov@cogentembedded.com]
Sent: 05 July 2017 17:14
Hello!
On 07/05/2017 06:56 PM, Biju Das wrote:
quoted
The iWave RZ/G1M Q7 SOM supports Gigabit Ethernet Phy (Micrel
KSZ9031MNX).
quoted
Gigabit Ethernet support is available in Renesas AVB driver.
To increase hardware support enable the driver in the
shmobile_defconfig multiplatform configuration.
Signed-off-by: Biju Das <redacted>
Reviewed-by: Chris Paterson <redacted>
Acked-by: Geert Uytterhoeven <geert+renesas@glider.be>
---
arch/arm/configs/shmobile_defconfig | 1 +
1 file changed, 1 insertion(+)
diff --git a/arch/arm/configs/shmobile_defconfig
b/arch/arm/configs/shmobile_defconfig
index 3c66a42..d992911 100644
--- a/arch/arm/configs/shmobile_defconfig
+++ b/arch/arm/configs/shmobile_defconfig
@@ -83,6 +83,7 @@ CONFIG_NETDEVICES=y
# CONFIG_NET_VENDOR_MICREL is not set #
CONFIG_NET_VENDOR_NATSEMI is
quoted
not set CONFIG_SH_ETH=y
+CONFIG_RAVB=y
Hm, I would enable it only as a module, given it's not easy to make use of
AVB on the 32-bit boards.
On the iWave-M platforms the only available Ethernet interface is AVB.
Without including the RAVB driver in the Kernel we won't be able to use
NFS.
I know adding CONFIG_RAVB for all shmobile devices may increase the
Kernel size for everyone, especially when most cannot use AVB without an
add-on board, but I don't think the increase will be big.
Thanks for the explanation, applied for v4.14.