[PATCH 0/9] net: mvmdio: add xSMI support

From: Antoine Tenart <hidden>
Date: 2017-06-07 08:38:01

Hello,

This series aims to add the xSMI support (also called xMDIO) to the
mvmdio driver. The xSMI interface complies with the IEEE 802.3 clause 45
and is used by 10GbE devices. On 7k and 8k (as of now), such an
interface is found and is used by Ethernet controllers.

Patches 1-3 are cosmetic cleanups.

Patches 4-6 are prerequisites to the xSMI support.

Patches 7-9 add the xSMI support to the mvmdio driver, and a node is
added both in the cp110 slave and master device trees.

This was tested on an Armada 8040 mcbin, as well as on both the
Armada 7040 DB and the Armada 8040 DB to ensure the SMI interface
was still working.

Thanks,
Antoine

Antoine Tenart (9):
  net: mvmdio: reorder headers alphabetically
  net: mvmdio: use tabs for defines
  net: mvmdio: use GENMASK for masks
  net: mvmdio: move the read valid check into its own function
  net: mvmdio: introduce an ops structure
  net: mvmdio: put the poll intervals in the private structure
  net: mvmdio: add xmdio support
  dt-bindings: orion-mdio: document the new xmdio compatible
  arm64: marvell: dts: add xmdio nodes for 7k/8k

 .../devicetree/bindings/net/marvell-orion-mdio.txt |   8 +-
 .../boot/dts/marvell/armada-cp110-master.dtsi      |   7 +
 .../arm64/boot/dts/marvell/armada-cp110-slave.dtsi |   7 +
 drivers/net/ethernet/marvell/Kconfig               |   6 +-
 drivers/net/ethernet/marvell/mvmdio.c              | 200 +++++++++++++++++----
 5 files changed, 184 insertions(+), 44 deletions(-)

--

1 more lines

[PATCH 1/9] net: mvmdio: reorder headers alphabetically

From: Antoine Tenart <hidden>
Date: 2017-06-07 08:38:02

Cosmetic fix reordering headers alphabetically.

Signed-off-by: Antoine Tenart <redacted>
---
 drivers/net/ethernet/marvell/mvmdio.c | 10 +++++-----
 1 file changed, 5 insertions(+), 5 deletions(-)

diff --git a/drivers/net/ethernet/marvell/mvmdio.c b/drivers/net/ethernet/marvell/mvmdio.c
index 90a60b98c28e..109a2bff334d 100644
--- a/drivers/net/ethernet/marvell/mvmdio.c
+++ b/drivers/net/ethernet/marvell/mvmdio.c

@@ -17,16 +17,16 @@
  * warranty of any kind, whether express or implied.
  */
 
+#include <linux/clk.h>
+#include <linux/delay.h>
+#include <linux/interrupt.h>
+#include <linux/io.h>
 #include <linux/kernel.h>
 #include <linux/module.h>
 #include <linux/mutex.h>
+#include <linux/of_mdio.h>
 #include <linux/phy.h>
-#include <linux/interrupt.h>
 #include <linux/platform_device.h>
-#include <linux/delay.h>
-#include <linux/io.h>
-#include <linux/clk.h>
-#include <linux/of_mdio.h>
 #include <linux/sched.h>
 #include <linux/wait.h>

-- 
2.9.4

[PATCH 2/9] net: mvmdio: use tabs for defines

From: Antoine Tenart <hidden>
Date: 2017-06-07 08:38:03

Cosmetic patch replacing spaces by tabs for defined values.

Signed-off-by: Antoine Tenart <redacted>
---
 drivers/net/ethernet/marvell/mvmdio.c | 26 +++++++++++++-------------
 1 file changed, 13 insertions(+), 13 deletions(-)

diff --git a/drivers/net/ethernet/marvell/mvmdio.c b/drivers/net/ethernet/marvell/mvmdio.c
index 109a2bff334d..17b518b13ae3 100644
--- a/drivers/net/ethernet/marvell/mvmdio.c
+++ b/drivers/net/ethernet/marvell/mvmdio.c

@@ -30,25 +30,25 @@
 #include <linux/sched.h>
 #include <linux/wait.h>
 
-#define MVMDIO_SMI_DATA_SHIFT              0
-#define MVMDIO_SMI_PHY_ADDR_SHIFT          16
-#define MVMDIO_SMI_PHY_REG_SHIFT           21
-#define MVMDIO_SMI_READ_OPERATION          BIT(26)
-#define MVMDIO_SMI_WRITE_OPERATION         0
-#define MVMDIO_SMI_READ_VALID              BIT(27)
-#define MVMDIO_SMI_BUSY                    BIT(28)
-#define MVMDIO_ERR_INT_CAUSE		   0x007C
-#define  MVMDIO_ERR_INT_SMI_DONE	   0x00000010
-#define MVMDIO_ERR_INT_MASK		   0x0080
+#define MVMDIO_SMI_DATA_SHIFT		0
+#define MVMDIO_SMI_PHY_ADDR_SHIFT	16
+#define MVMDIO_SMI_PHY_REG_SHIFT	21
+#define MVMDIO_SMI_READ_OPERATION	BIT(26)
+#define MVMDIO_SMI_WRITE_OPERATION	0
+#define MVMDIO_SMI_READ_VALID		BIT(27)
+#define MVMDIO_SMI_BUSY			BIT(28)
+#define MVMDIO_ERR_INT_CAUSE		0x007C
+#define  MVMDIO_ERR_INT_SMI_DONE	0x00000010
+#define MVMDIO_ERR_INT_MASK		0x0080
 
 /*
  * SMI Timeout measurements:
  * - Kirkwood 88F6281 (Globalscale Dreamplug): 45us to 95us (Interrupt)
  * - Armada 370       (Globalscale Mirabox):   41us to 43us (Polled)
  */
-#define MVMDIO_SMI_TIMEOUT		   1000 /* 1000us = 1ms */
-#define MVMDIO_SMI_POLL_INTERVAL_MIN	   45
-#define MVMDIO_SMI_POLL_INTERVAL_MAX	   55
+#define MVMDIO_SMI_TIMEOUT		1000 /* 1000us = 1ms */
+#define MVMDIO_SMI_POLL_INTERVAL_MIN	45
+#define MVMDIO_SMI_POLL_INTERVAL_MAX	55
 
 struct orion_mdio_dev {
 	struct mutex lock;

-- 
2.9.4

[PATCH 3/9] net: mvmdio: use GENMASK for masks

From: Antoine Tenart <hidden>
Date: 2017-06-07 08:38:04

Cosmetic patch to use the GENMASK helper for masks.

Signed-off-by: Antoine Tenart <redacted>
---
 drivers/net/ethernet/marvell/mvmdio.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/net/ethernet/marvell/mvmdio.c b/drivers/net/ethernet/marvell/mvmdio.c
index 17b518b13ae3..96af8d57d9e5 100644
--- a/drivers/net/ethernet/marvell/mvmdio.c
+++ b/drivers/net/ethernet/marvell/mvmdio.c

@@ -138,7 +138,7 @@ static int orion_mdio_read(struct mii_bus *bus, int mii_id,
 		goto out;
 	}
 
-	ret = val & 0xFFFF;
+	ret = val & GENMASK(15,0);
 out:
 	mutex_unlock(&dev->lock);
 	return ret;

-- 
2.9.4

[PATCH 4/9] net: mvmdio: move the read valid check into its own function

From: Antoine Tenart <hidden>
Date: 2017-06-07 08:38:05

Move the read valid check in its own function. This is needed as a
requirement to factorize the driver to add the xMDIO support in the
future.

Signed-off-by: Antoine Tenart <redacted>
---
 drivers/net/ethernet/marvell/mvmdio.c | 11 +++++++----
 1 file changed, 7 insertions(+), 4 deletions(-)

diff --git a/drivers/net/ethernet/marvell/mvmdio.c b/drivers/net/ethernet/marvell/mvmdio.c
index 96af8d57d9e5..56bbe3990590 100644
--- a/drivers/net/ethernet/marvell/mvmdio.c
+++ b/drivers/net/ethernet/marvell/mvmdio.c

@@ -69,6 +69,11 @@ static int orion_mdio_smi_is_done(struct orion_mdio_dev *dev)
 	return !(readl(dev->regs) & MVMDIO_SMI_BUSY);
 }
 
+static int orion_mdio_smi_is_read_valid(struct orion_mdio_dev *dev)
+{
+	return !(readl(dev->regs) & MVMDIO_SMI_READ_VALID);
+}
+
 /* Wait for the SMI unit to be ready for another operation
  */
 static int orion_mdio_wait_ready(struct mii_bus *bus)

@@ -113,7 +118,6 @@ static int orion_mdio_read(struct mii_bus *bus, int mii_id,
 			   int regnum)
 {
 	struct orion_mdio_dev *dev = bus->priv;
-	u32 val;
 	int ret;
 
 	mutex_lock(&dev->lock);

@@ -131,14 +135,13 @@ static int orion_mdio_read(struct mii_bus *bus, int mii_id,
 	if (ret < 0)
 		goto out;
 
-	val = readl(dev->regs);
-	if (!(val & MVMDIO_SMI_READ_VALID)) {
+	if (orion_mdio_smi_is_read_valid(dev)) {
 		dev_err(bus->parent, "SMI bus read not valid\n");
 		ret = -ENODEV;
 		goto out;
 	}
 
-	ret = val & GENMASK(15,0);
+	ret = readl(dev->regs) & GENMASK(15,0);
 out:
 	mutex_unlock(&dev->lock);
 	return ret;

-- 
2.9.4

[PATCH 5/9] net: mvmdio: introduce an ops structure

From: Antoine Tenart <hidden>
Date: 2017-06-07 08:38:06

Introduce an ops structure to add an indirection on functions accessing
the registers. This is needed to add the xMDIO support later.

Signed-off-by: Antoine Tenart <redacted>
---
 drivers/net/ethernet/marvell/mvmdio.c | 65 +++++++++++++++++++++++++++--------
 1 file changed, 51 insertions(+), 14 deletions(-)

diff --git a/drivers/net/ethernet/marvell/mvmdio.c b/drivers/net/ethernet/marvell/mvmdio.c
index 56bbe3990590..8a71ef93a61b 100644
--- a/drivers/net/ethernet/marvell/mvmdio.c
+++ b/drivers/net/ethernet/marvell/mvmdio.c

@@ -62,6 +62,15 @@ struct orion_mdio_dev {
 	 */
 	int err_interrupt;
 	wait_queue_head_t smi_busy_wait;
+	struct orion_mdio_ops *ops;
+};
+
+struct orion_mdio_ops {
+	int (*is_done)(struct orion_mdio_dev *);
+	int (*is_read_valid)(struct orion_mdio_dev *);
+	void (*start_read)(struct orion_mdio_dev *, int, int);
+	u16 (*read)(struct orion_mdio_dev *);
+	void (*write)(struct orion_mdio_dev *, int, int, u16);
 };
 
 static int orion_mdio_smi_is_done(struct orion_mdio_dev *dev)

@@ -74,6 +83,30 @@ static int orion_mdio_smi_is_read_valid(struct orion_mdio_dev *dev)
 	return !(readl(dev->regs) & MVMDIO_SMI_READ_VALID);
 }
 
+static void orion_mdio_start_read_op(struct orion_mdio_dev *dev, int mii_id,
+				     int regnum)
+{
+	writel(((mii_id << MVMDIO_SMI_PHY_ADDR_SHIFT) |
+		(regnum << MVMDIO_SMI_PHY_REG_SHIFT)  |
+		MVMDIO_SMI_READ_OPERATION),
+	       dev->regs);
+}
+
+static u16 orion_mdio_read_op(struct orion_mdio_dev *dev)
+{
+	return readl(dev->regs) & GENMASK(15,0);
+}
+
+static void orion_mdio_write_op(struct orion_mdio_dev *dev, int mii_id,
+				int regnum, u16 value)
+{
+	writel(((mii_id << MVMDIO_SMI_PHY_ADDR_SHIFT) |
+		(regnum << MVMDIO_SMI_PHY_REG_SHIFT)  |
+		MVMDIO_SMI_WRITE_OPERATION            |
+		(value << MVMDIO_SMI_DATA_SHIFT)),
+	       dev->regs);
+}
+
 /* Wait for the SMI unit to be ready for another operation
  */
 static int orion_mdio_wait_ready(struct mii_bus *bus)

@@ -84,7 +117,7 @@ static int orion_mdio_wait_ready(struct mii_bus *bus)
 	int timedout = 0;
 
 	while (1) {
-	        if (orion_mdio_smi_is_done(dev))
+	        if (dev->ops->is_done(dev))
 			return 0;
 	        else if (timedout)
 			break;

@@ -103,8 +136,7 @@ static int orion_mdio_wait_ready(struct mii_bus *bus)
 			if (timeout < 2)
 				timeout = 2;
 			wait_event_timeout(dev->smi_busy_wait,
-				           orion_mdio_smi_is_done(dev),
-				           timeout);
+				           dev->ops->is_done(dev), timeout);
 
 			++timedout;
 	        }

@@ -126,22 +158,19 @@ static int orion_mdio_read(struct mii_bus *bus, int mii_id,
 	if (ret < 0)
 		goto out;
 
-	writel(((mii_id << MVMDIO_SMI_PHY_ADDR_SHIFT) |
-		(regnum << MVMDIO_SMI_PHY_REG_SHIFT)  |
-		MVMDIO_SMI_READ_OPERATION),
-	       dev->regs);
+	dev->ops->start_read(dev, mii_id, regnum);
 
 	ret = orion_mdio_wait_ready(bus);
 	if (ret < 0)
 		goto out;
 
-	if (orion_mdio_smi_is_read_valid(dev)) {
+	if (dev->ops->is_read_valid(dev)) {
 		dev_err(bus->parent, "SMI bus read not valid\n");
 		ret = -ENODEV;
 		goto out;
 	}
 
-	ret = readl(dev->regs) & GENMASK(15,0);
+	ret = dev->ops->read(dev);
 out:
 	mutex_unlock(&dev->lock);
 	return ret;

@@ -159,11 +188,7 @@ static int orion_mdio_write(struct mii_bus *bus, int mii_id,
 	if (ret < 0)
 		goto out;
 
-	writel(((mii_id << MVMDIO_SMI_PHY_ADDR_SHIFT) |
-		(regnum << MVMDIO_SMI_PHY_REG_SHIFT)  |
-		MVMDIO_SMI_WRITE_OPERATION            |
-		(value << MVMDIO_SMI_DATA_SHIFT)),
-	       dev->regs);
+	dev->ops->write(dev, mii_id, regnum, value);
 
 out:
 	mutex_unlock(&dev->lock);

@@ -190,6 +215,7 @@ static int orion_mdio_probe(struct platform_device *pdev)
 	struct resource *r;
 	struct mii_bus *bus;
 	struct orion_mdio_dev *dev;
+	struct orion_mdio_ops *ops;
 	int i, ret;
 
 	r = platform_get_resource(pdev, IORESOURCE_MEM, 0);

@@ -249,6 +275,17 @@ static int orion_mdio_probe(struct platform_device *pdev)
 
 	mutex_init(&dev->lock);
 
+	ops = devm_kzalloc(&pdev->dev, sizeof(*ops), GFP_KERNEL);
+	if (!ops)
+		return -ENOMEM;
+
+	ops->is_done = orion_mdio_smi_is_done;
+	ops->is_read_valid = orion_mdio_smi_is_read_valid;
+	ops->start_read = orion_mdio_start_read_op;
+	ops->read = orion_mdio_read_op;
+	ops->write = orion_mdio_write_op;
+	dev->ops = ops;
+
 	if (pdev->dev.of_node)
 		ret = of_mdiobus_register(bus, pdev->dev.of_node);
 	else

-- 
2.9.4

[PATCH 6/9] net: mvmdio: put the poll intervals in the private structure

From: Antoine Tenart <hidden>
Date: 2017-06-07 08:38:07

Put the two poll intervals (min and max) in the driver's private
structure. This is needed to add the xmdio support later.

Signed-off-by: Antoine Tenart <redacted>
---
 drivers/net/ethernet/marvell/mvmdio.c | 9 +++++++--
 1 file changed, 7 insertions(+), 2 deletions(-)

diff --git a/drivers/net/ethernet/marvell/mvmdio.c b/drivers/net/ethernet/marvell/mvmdio.c
index 8a71ef93a61b..3cb3dd3331d8 100644
--- a/drivers/net/ethernet/marvell/mvmdio.c
+++ b/drivers/net/ethernet/marvell/mvmdio.c

@@ -63,6 +63,9 @@ struct orion_mdio_dev {
 	int err_interrupt;
 	wait_queue_head_t smi_busy_wait;
 	struct orion_mdio_ops *ops;
+
+	unsigned int poll_interval_min;
+	unsigned int poll_interval_max;
 };
 
 struct orion_mdio_ops {

@@ -123,8 +126,8 @@ static int orion_mdio_wait_ready(struct mii_bus *bus)
 			break;
 
 	        if (dev->err_interrupt <= 0) {
-			usleep_range(MVMDIO_SMI_POLL_INTERVAL_MIN,
-				     MVMDIO_SMI_POLL_INTERVAL_MAX);
+			usleep_range(dev->poll_interval_min,
+				     dev->poll_interval_max);
 
 			if (time_is_before_jiffies(end))
 				++timedout;

@@ -279,6 +282,8 @@ static int orion_mdio_probe(struct platform_device *pdev)
 	if (!ops)
 		return -ENOMEM;
 
+	dev->poll_interval_min = MVMDIO_SMI_POLL_INTERVAL_MIN;
+	dev->poll_interval_max = MVMDIO_SMI_POLL_INTERVAL_MAX;
 	ops->is_done = orion_mdio_smi_is_done;
 	ops->is_read_valid = orion_mdio_smi_is_read_valid;
 	ops->start_read = orion_mdio_start_read_op;

-- 
2.9.4

[PATCH 7/9] net: mvmdio: add xmdio support

From: Antoine Tenart <hidden>
Date: 2017-06-07 08:38:08

This patch adds the xMDIO interface support in the mvmdio driver. This
interface is used in Ethernet controllers on Marvell 370, 7k and 8k (as
of now). The xSMI interface supported by this driver complies with the
IEEE 802.3 clause 45 (while the SMI interface complies with the clause
22). The xSMI interface is used by 10GbE devices.

Signed-off-by: Antoine Tenart <redacted>
---
 drivers/net/ethernet/marvell/Kconfig  |   6 +-
 drivers/net/ethernet/marvell/mvmdio.c | 121 ++++++++++++++++++++++++++++------
 2 files changed, 104 insertions(+), 23 deletions(-)

diff --git a/drivers/net/ethernet/marvell/Kconfig b/drivers/net/ethernet/marvell/Kconfig
index da6fb825afea..205bb7e683b7 100644
--- a/drivers/net/ethernet/marvell/Kconfig
+++ b/drivers/net/ethernet/marvell/Kconfig

@@ -35,9 +35,9 @@ config MVMDIO
 	depends on HAS_IOMEM
 	select PHYLIB
 	---help---
-	  This driver supports the MDIO interface found in the network
-	  interface units of the Marvell EBU SoCs (Kirkwood, Orion5x,
-	  Dove, Armada 370 and Armada XP).
+	  This driver supports the MDIO and xMDIO interfaces found in
+	  the network interface units of the Marvell EBU SoCs (Kirkwood,
+	  Orion5x, Dove, Armada 370, Armada XP, Armada 7k and Armada 8k).
 
 	  This driver is used by the MV643XX_ETH and MVNETA drivers.

diff --git a/drivers/net/ethernet/marvell/mvmdio.c b/drivers/net/ethernet/marvell/mvmdio.c
index 3cb3dd3331d8..13b198aca5c1 100644
--- a/drivers/net/ethernet/marvell/mvmdio.c
+++ b/drivers/net/ethernet/marvell/mvmdio.c

@@ -41,6 +41,15 @@
 #define  MVMDIO_ERR_INT_SMI_DONE	0x00000010
 #define MVMDIO_ERR_INT_MASK		0x0080
 
+#define MVMDIO_XSMI_MGNT_REG		0x0
+#define  MVMDIO_XSMI_READ_VALID		BIT(29)
+#define  MVMDIO_XSMI_BUSY		BIT(30)
+#define MVMDIO_XSMI_ADDR_REG		0x8
+#define  MVMDIO_XSMI_PHYADDR_SHIFT	16
+#define  MVMDIO_XSMI_DEVADDR_SHIFT	21
+#define  MVMDIO_XSMI_READ_OPERATION	(0x7 << 26)
+#define  MVMDIO_XSMI_WRITE_OPERATION	(0x5 << 27)
+
 /*
  * SMI Timeout measurements:
  * - Kirkwood 88F6281 (Globalscale Dreamplug): 45us to 95us (Interrupt)

@@ -50,6 +59,9 @@
 #define MVMDIO_SMI_POLL_INTERVAL_MIN	45
 #define MVMDIO_SMI_POLL_INTERVAL_MAX	55
 
+#define MVMDIO_XSMI_POLL_INTERVAL_MIN	150
+#define MVMDIO_XSMI_POLL_INTERVAL_MAX	160
+
 struct orion_mdio_dev {
 	struct mutex lock;
 	void __iomem *regs;

@@ -76,18 +88,19 @@ struct orion_mdio_ops {
 	void (*write)(struct orion_mdio_dev *, int, int, u16);
 };
 
-static int orion_mdio_smi_is_done(struct orion_mdio_dev *dev)
+/* smi */
+static int smi_is_done(struct orion_mdio_dev *dev)
 {
 	return !(readl(dev->regs) & MVMDIO_SMI_BUSY);
 }
 
-static int orion_mdio_smi_is_read_valid(struct orion_mdio_dev *dev)
+static int smi_is_read_valid(struct orion_mdio_dev *dev)
 {
 	return !(readl(dev->regs) & MVMDIO_SMI_READ_VALID);
 }
 
-static void orion_mdio_start_read_op(struct orion_mdio_dev *dev, int mii_id,
-				     int regnum)
+static void smi_start_read_op(struct orion_mdio_dev *dev, int mii_id,
+			      int regnum)
 {
 	writel(((mii_id << MVMDIO_SMI_PHY_ADDR_SHIFT) |
 		(regnum << MVMDIO_SMI_PHY_REG_SHIFT)  |

@@ -95,13 +108,13 @@ static void orion_mdio_start_read_op(struct orion_mdio_dev *dev, int mii_id,
 	       dev->regs);
 }
 
-static u16 orion_mdio_read_op(struct orion_mdio_dev *dev)
+static u16 smi_read_op(struct orion_mdio_dev *dev)
 {
 	return readl(dev->regs) & GENMASK(15,0);
 }
 
-static void orion_mdio_write_op(struct orion_mdio_dev *dev, int mii_id,
-				int regnum, u16 value)
+static void smi_write_op(struct orion_mdio_dev *dev, int mii_id,
+			 int regnum, u16 value)
 {
 	writel(((mii_id << MVMDIO_SMI_PHY_ADDR_SHIFT) |
 		(regnum << MVMDIO_SMI_PHY_REG_SHIFT)  |

@@ -110,6 +123,47 @@ static void orion_mdio_write_op(struct orion_mdio_dev *dev, int mii_id,
 	       dev->regs);
 }
 
+/* xsmi */
+static int xsmi_is_done(struct orion_mdio_dev *dev)
+{
+	return !(readl(dev->regs + MVMDIO_XSMI_MGNT_REG) & MVMDIO_XSMI_BUSY);
+}
+
+static int xsmi_is_read_valid(struct orion_mdio_dev *dev)
+{
+	return !(readl(dev->regs + MVMDIO_XSMI_MGNT_REG) &
+		 MVMDIO_XSMI_READ_VALID);
+}
+
+static void xsmi_start_read_op(struct orion_mdio_dev *dev, int mii_id,
+			      int regnum)
+{
+	u16 dev_addr = regnum >> 16;
+
+	writel(regnum & GENMASK(15,0), dev->regs + MVMDIO_XSMI_ADDR_REG);
+	writel((mii_id << MVMDIO_XSMI_PHYADDR_SHIFT) |
+	       (dev_addr << MVMDIO_XSMI_DEVADDR_SHIFT) |
+	       MVMDIO_XSMI_READ_OPERATION,
+	       dev->regs + MVMDIO_XSMI_MGNT_REG);
+}
+
+static u16 xsmi_read_op(struct orion_mdio_dev *dev)
+{
+	return readl(dev->regs + MVMDIO_XSMI_MGNT_REG) & GENMASK(15,0);
+}
+
+static void xsmi_write_op(struct orion_mdio_dev *dev, int mii_id,
+			 int regnum, u16 value)
+{
+	u16 dev_addr = regnum >> 16;
+
+	writel(regnum & GENMASK(15,0), dev->regs + MVMDIO_XSMI_ADDR_REG);
+	writel((mii_id << MVMDIO_XSMI_PHYADDR_SHIFT) |
+	       (dev_addr << MVMDIO_XSMI_DEVADDR_SHIFT) |
+	       MVMDIO_XSMI_WRITE_OPERATION | value,
+	       dev->regs + MVMDIO_XSMI_MGNT_REG);
+}
+
 /* Wait for the SMI unit to be ready for another operation
  */
 static int orion_mdio_wait_ready(struct mii_bus *bus)

@@ -213,12 +267,47 @@ static irqreturn_t orion_mdio_err_irq(int irq, void *dev_id)
 	return IRQ_NONE;
 }
 
+static int orion_mdio_populate_ops(struct platform_device *pdev,
+				   struct orion_mdio_dev *dev)
+{
+	struct orion_mdio_ops *ops;
+	struct device_node *np = pdev->dev.of_node;
+
+	ops = devm_kzalloc(&pdev->dev, sizeof(*ops), GFP_KERNEL);
+	if (!ops)
+		return -ENOMEM;
+
+	if (of_device_is_compatible(np, "marvell,orion-mdio")) {
+		ops->is_done = smi_is_done;
+		ops->is_read_valid = smi_is_read_valid;
+		ops->start_read = smi_start_read_op;
+		ops->read = smi_read_op;
+		ops->write = smi_write_op;
+
+		dev->poll_interval_min = MVMDIO_SMI_POLL_INTERVAL_MIN;
+		dev->poll_interval_max = MVMDIO_SMI_POLL_INTERVAL_MAX;
+	} else if (of_device_is_compatible(np, "marvell,xmdio")) {
+		ops->is_done = xsmi_is_done;
+		ops->is_read_valid = xsmi_is_read_valid;
+		ops->start_read = xsmi_start_read_op;
+		ops->read = xsmi_read_op;
+		ops->write = xsmi_write_op;
+
+		dev->poll_interval_min = MVMDIO_XSMI_POLL_INTERVAL_MIN;
+		dev->poll_interval_max = MVMDIO_XSMI_POLL_INTERVAL_MAX;
+	} else {
+		return -EINVAL;
+	}
+
+	dev->ops = ops;
+	return 0;
+}
+
 static int orion_mdio_probe(struct platform_device *pdev)
 {
 	struct resource *r;
 	struct mii_bus *bus;
 	struct orion_mdio_dev *dev;
-	struct orion_mdio_ops *ops;
 	int i, ret;
 
 	r = platform_get_resource(pdev, IORESOURCE_MEM, 0);

@@ -278,18 +367,9 @@ static int orion_mdio_probe(struct platform_device *pdev)
 
 	mutex_init(&dev->lock);
 
-	ops = devm_kzalloc(&pdev->dev, sizeof(*ops), GFP_KERNEL);
-	if (!ops)
-		return -ENOMEM;
-
-	dev->poll_interval_min = MVMDIO_SMI_POLL_INTERVAL_MIN;
-	dev->poll_interval_max = MVMDIO_SMI_POLL_INTERVAL_MAX;
-	ops->is_done = orion_mdio_smi_is_done;
-	ops->is_read_valid = orion_mdio_smi_is_read_valid;
-	ops->start_read = orion_mdio_start_read_op;
-	ops->read = orion_mdio_read_op;
-	ops->write = orion_mdio_write_op;
-	dev->ops = ops;
+	ret = orion_mdio_populate_ops(pdev, dev);
+	if (ret)
+		return ret;
 
 	if (pdev->dev.of_node)
 		ret = of_mdiobus_register(bus, pdev->dev.of_node);

@@ -340,6 +420,7 @@ static int orion_mdio_remove(struct platform_device *pdev)
 
 static const struct of_device_id orion_mdio_match[] = {
 	{ .compatible = "marvell,orion-mdio" },
+	{ .compatible = "marvell,xmdio" },
 	{ }
 };
 MODULE_DEVICE_TABLE(of, orion_mdio_match);

-- 
2.9.4

[PATCH 8/9] dt-bindings: orion-mdio: document the new xmdio compatible

From: Antoine Tenart <hidden>
Date: 2017-06-07 08:38:09

A new compatible for Marvell xMDIO interfaces was added into the Marvell
MDIO driver. Document this new compatible.

Signed-off-by: Antoine Tenart <redacted>
---
 Documentation/devicetree/bindings/net/marvell-orion-mdio.txt | 8 ++++----
 1 file changed, 4 insertions(+), 4 deletions(-)

diff --git a/Documentation/devicetree/bindings/net/marvell-orion-mdio.txt b/Documentation/devicetree/bindings/net/marvell-orion-mdio.txt
index ccdabdcc8618..315036ff8fed 100644
--- a/Documentation/devicetree/bindings/net/marvell-orion-mdio.txt
+++ b/Documentation/devicetree/bindings/net/marvell-orion-mdio.txt

@@ -1,12 +1,12 @@
 * Marvell MDIO Ethernet Controller interface
 
 The Ethernet controllers of the Marvel Kirkwood, Dove, Orion5x,
-MV78xx0, Armada 370 and Armada XP have an identical unit that provides
-an interface with the MDIO bus. This driver handles this MDIO
-interface.
+MV78xx0, Armada 370, Armada XP, Armada 7k and Armada 8k have an
+identical unit that provides an interface with the MDIO bus or to
+the xMDIO bus. This driver handles these interfaces.
 
 Required properties:
-- compatible: "marvell,orion-mdio"
+- compatible: "marvell,orion-mdio" or "marvell,xmdio"
 - reg: address and length of the MDIO registers.  When an interrupt is
   not present, the length is the size of the SMI register (4 bytes)
   otherwise it must be 0x84 bytes to cover the interrupt control

-- 
2.9.4

[PATCH 9/9] arm64: marvell: dts: add xmdio nodes for 7k/8k

From: Antoine Tenart <hidden>
Date: 2017-06-07 08:38:10

Add the description of the xMDIO bus for the Marvell Armada 7k and
Marvell Armada 8k; for both CP110 slave and master. This bus is found
on Marvell Ethernet controllers and provides an interface with the
xMDIO bus.

Signed-off-by: Antoine Tenart <redacted>
---
 arch/arm64/boot/dts/marvell/armada-cp110-master.dtsi | 7 +++++++
 arch/arm64/boot/dts/marvell/armada-cp110-slave.dtsi  | 7 +++++++
 2 files changed, 14 insertions(+)

diff --git a/arch/arm64/boot/dts/marvell/armada-cp110-master.dtsi b/arch/arm64/boot/dts/marvell/armada-cp110-master.dtsi
index 037ed30d75a7..95953743455e 100644
--- a/arch/arm64/boot/dts/marvell/armada-cp110-master.dtsi
+++ b/arch/arm64/boot/dts/marvell/armada-cp110-master.dtsi

@@ -98,6 +98,13 @@
 				clocks = <&cpm_syscon0 1 9>, <&cpm_syscon0 1 5>;
 			};
 
+			cpm_xmdio: mdio@12a600 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				compatible = "marvell,xmdio";
+				reg = <0x12a600 0x10>;
+			};
+
 			cpm_icu: interrupt-controller@1e0000 {
 				compatible = "marvell,cp110-icu"; 
 				reg = <0x1e0000 0x10>;

diff --git a/arch/arm64/boot/dts/marvell/armada-cp110-slave.dtsi b/arch/arm64/boot/dts/marvell/armada-cp110-slave.dtsi
index 2a99ff8fca2a..594356243ddb 100644
--- a/arch/arm64/boot/dts/marvell/armada-cp110-slave.dtsi
+++ b/arch/arm64/boot/dts/marvell/armada-cp110-slave.dtsi

@@ -103,6 +103,13 @@
 				clocks = <&cps_syscon0 1 9>, <&cps_syscon0 1 5>;
 			};
 
+			cps_xmdio: mdio@12a600 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				compatible = "marvell,xmdio";
+				reg = <0x12a600 0x10>;
+			};
+
 			cps_icu: interrupt-controller@1e0000 {
 				compatible = "marvell,cp110-icu";
 				reg = <0x1e0000 0x10>;

-- 
2.9.4

[PATCH 4/9] net: mvmdio: move the read valid check into its own function

From: Sergei Shtylyov <hidden>
Date: 2017-06-07 10:00:21

Hello!

On 6/7/2017 11:38 AM, Antoine Tenart wrote:

quoted hunk

Move the read valid check in its own function. This is needed as a
requirement to factorize the driver to add the xMDIO support in the
future.

Signed-off-by: Antoine Tenart <redacted>
---
 drivers/net/ethernet/marvell/mvmdio.c | 11 +++++++----
 1 file changed, 7 insertions(+), 4 deletions(-)

diff --git a/drivers/net/ethernet/marvell/mvmdio.c b/drivers/net/ethernet/marvell/mvmdio.c
index 96af8d57d9e5..56bbe3990590 100644
--- a/drivers/net/ethernet/marvell/mvmdio.c
+++ b/drivers/net/ethernet/marvell/mvmdio.c

@@ -69,6 +69,11 @@ static int orion_mdio_smi_is_done(struct orion_mdio_dev *dev)
 	return !(readl(dev->regs) & MVMDIO_SMI_BUSY);
 }

+static int orion_mdio_smi_is_read_valid(struct orion_mdio_dev *dev)
+{
+	return !(readl(dev->regs) & MVMDIO_SMI_READ_VALID);
+}
+
 /* Wait for the SMI unit to be ready for another operation
  */
 static int orion_mdio_wait_ready(struct mii_bus *bus)

@@ -113,7 +118,6 @@ static int orion_mdio_read(struct mii_bus *bus, int mii_id,
 			   int regnum)
 {
 	struct orion_mdio_dev *dev = bus->priv;
-	u32 val;
 	int ret;

 	mutex_lock(&dev->lock);

@@ -131,14 +135,13 @@ static int orion_mdio_read(struct mii_bus *bus, int mii_id,
 	if (ret < 0)
 		goto out;

-	val = readl(dev->regs);
-	if (!(val & MVMDIO_SMI_READ_VALID)) {
+	if (orion_mdio_smi_is_read_valid(dev)) {

1 more quoted lines

   I think you reversed the valuid/invalid sense in the new function's name.

 		ret = -ENODEV;
 		goto out;
 	}

[...]

MBR, Sergei

[PATCH 7/9] net: mvmdio: add xmdio support

From: Andrew Lunn <andrew@lunn.ch>
Date: 2017-06-07 12:12:05

On Wed, Jun 07, 2017 at 10:38:08AM +0200, Antoine Tenart wrote:

This patch adds the xMDIO interface support in the mvmdio driver. This
interface is used in Ethernet controllers on Marvell 370, 7k and 8k (as
of now). The xSMI interface supported by this driver complies with the
IEEE 802.3 clause 45 (while the SMI interface complies with the clause
22). The xSMI interface is used by 10GbE devices.

Signed-off-by: Antoine Tenart <redacted>

Hi Antoine

I've only take a quick look, but i don't see anywhere you look at the
register address and see if it has MII_ADDR_C45 to determine if a C45
transaction should be done, or a C22. The MDIO bus can have a mix of
C45 and C22 devices on it, and you need to use the correct transaction
type depending on the target device/address.

	  Andrew

[PATCH 7/9] net: mvmdio: add xmdio support

From: Antoine Tenart <hidden>
Date: 2017-06-07 14:42:32

Hi Andrew,

On Wed, Jun 07, 2017 at 02:12:05PM +0200, Andrew Lunn wrote:

On Wed, Jun 07, 2017 at 10:38:08AM +0200, Antoine Tenart wrote:

quoted

This patch adds the xMDIO interface support in the mvmdio driver. This
interface is used in Ethernet controllers on Marvell 370, 7k and 8k (as
of now). The xSMI interface supported by this driver complies with the
IEEE 802.3 clause 45 (while the SMI interface complies with the clause
22). The xSMI interface is used by 10GbE devices.

I've only take a quick look, but i don't see anywhere you look at the
register address and see if it has MII_ADDR_C45 to determine if a C45
transaction should be done, or a C22. The MDIO bus can have a mix of
C45 and C22 devices on it, and you need to use the correct transaction
type depending on the target device/address.

So this could be dynamic and not based on the compatible. I'll try this
and see if it can work.

Thanks!

-- 
Antoine Ténart, Free Electrons
Embedded Linux and Kernel engineering
http://free-electrons.com

[PATCH 4/9] net: mvmdio: move the read valid check into its own function

From: Antoine Tenart <hidden>
Date: 2017-06-07 14:43:08

Hello,

On Wed, Jun 07, 2017 at 01:00:21PM +0300, Sergei Shtylyov wrote:

On 6/7/2017 11:38 AM, Antoine Tenart wrote:

quoted

-	val = readl(dev->regs);
-	if (!(val & MVMDIO_SMI_READ_VALID)) {
+	if (orion_mdio_smi_is_read_valid(dev)) {
 		dev_err(bus->parent, "SMI bus read not valid\n");

   I think you reversed the valuid/invalid sense in the new function's name.

Good catch, I'll fix this.

Thanks!
Antoine

-- 
Antoine Ténart, Free Electrons
Embedded Linux and Kernel engineering
http://free-electrons.com

[PATCH 7/9] net: mvmdio: add xmdio support

From: Florian Fainelli <f.fainelli@gmail.com>
Date: 2017-06-07 15:48:06

On 06/07/2017 01:38 AM, Antoine Tenart wrote:

This patch adds the xMDIO interface support in the mvmdio driver. This
interface is used in Ethernet controllers on Marvell 370, 7k and 8k (as
of now). The xSMI interface supported by this driver complies with the
IEEE 802.3 clause 45 (while the SMI interface complies with the clause
22). The xSMI interface is used by 10GbE devices.

Signed-off-by: Antoine Tenart <redacted>
---

quoted hunk

+	if (of_device_is_compatible(np, "marvell,orion-mdio")) {
+		ops->is_done = smi_is_done;
+		ops->is_read_valid = smi_is_read_valid;
+		ops->start_read = smi_start_read_op;
+		ops->read = smi_read_op;
+		ops->write = smi_write_op;
+
+		dev->poll_interval_min = MVMDIO_SMI_POLL_INTERVAL_MIN;
+		dev->poll_interval_max = MVMDIO_SMI_POLL_INTERVAL_MAX;
+	} else if (of_device_is_compatible(np, "marvell,xmdio")) {
+		ops->is_done = xsmi_is_done;
+		ops->is_read_valid = xsmi_is_read_valid;
+		ops->start_read = xsmi_start_read_op;
+		ops->read = xsmi_read_op;
+		ops->write = xsmi_write_op;
+
+		dev->poll_interval_min = MVMDIO_XSMI_POLL_INTERVAL_MIN;
+		dev->poll_interval_max = MVMDIO_XSMI_POLL_INTERVAL_MAX;
+	} else {
+		return -EINVAL;
+	}

Instead of doing this, you could have the ops structure declared e.g: a
static global variables in the driver and reference them from the
of_device_id .data field, something like:

static struct orion_mdio_ops mdio_ops = {
	...
};

static struct orion_mdio_data mdio_data = {
	.ops = &mdio_ops,
	.poll_intervall_min = ...,
	.poll_interfave_max = ...,
};

static struct orion_mdio_ops xmdio_ops = {
	...
};

static strcut orion_mdio_data xmdio_ data = {
};

and then reference those using of_id->data in the probe function

quoted hunk

+
+	dev->ops = ops;
+	return 0;
+}
+
 static int orion_mdio_probe(struct platform_device *pdev)
 {
 	struct resource *r;
 	struct mii_bus *bus;
 	struct orion_mdio_dev *dev;
-	struct orion_mdio_ops *ops;
 	int i, ret;
 
 	r = platform_get_resource(pdev, IORESOURCE_MEM, 0);

@@ -278,18 +367,9 @@ static int orion_mdio_probe(struct platform_device *pdev)
 
 	mutex_init(&dev->lock);
 
-	ops = devm_kzalloc(&pdev->dev, sizeof(*ops), GFP_KERNEL);
-	if (!ops)
-		return -ENOMEM;
-
-	dev->poll_interval_min = MVMDIO_SMI_POLL_INTERVAL_MIN;
-	dev->poll_interval_max = MVMDIO_SMI_POLL_INTERVAL_MAX;
-	ops->is_done = orion_mdio_smi_is_done;
-	ops->is_read_valid = orion_mdio_smi_is_read_valid;
-	ops->start_read = orion_mdio_start_read_op;
-	ops->read = orion_mdio_read_op;
-	ops->write = orion_mdio_write_op;
-	dev->ops = ops;
+	ret = orion_mdio_populate_ops(pdev, dev);
+	if (ret)
+		return ret;
 
 	if (pdev->dev.of_node)
 		ret = of_mdiobus_register(bus, pdev->dev.of_node);
@@ -340,6 +420,7 @@ static int orion_mdio_remove(struct platform_device *pdev)
 
 static const struct of_device_id orion_mdio_match[] = {
 	{ .compatible = "marvell,orion-mdio" },

and do .data = &mdio_data

+	{ .compatible = "marvell,xmdio" },

and .data = &xmdio_data

 	{ }
 };
 MODULE_DEVICE_TABLE(of, orion_mdio_match);

-- 
Florian

[PATCH 7/9] net: mvmdio: add xmdio support

From: Russell King - ARM Linux <linux@armlinux.org.uk>
Date: 2017-06-07 15:56:36

On Wed, Jun 07, 2017 at 08:48:06AM -0700, Florian Fainelli wrote:

On 06/07/2017 01:38 AM, Antoine Tenart wrote:

quoted

This patch adds the xMDIO interface support in the mvmdio driver. This
interface is used in Ethernet controllers on Marvell 370, 7k and 8k (as
of now). The xSMI interface supported by this driver complies with the
IEEE 802.3 clause 45 (while the SMI interface complies with the clause
22). The xSMI interface is used by 10GbE devices.

Signed-off-by: Antoine Tenart <redacted>
---

quoted

+	if (of_device_is_compatible(np, "marvell,orion-mdio")) {
+		ops->is_done = smi_is_done;
+		ops->is_read_valid = smi_is_read_valid;
+		ops->start_read = smi_start_read_op;
+		ops->read = smi_read_op;
+		ops->write = smi_write_op;
+
+		dev->poll_interval_min = MVMDIO_SMI_POLL_INTERVAL_MIN;
+		dev->poll_interval_max = MVMDIO_SMI_POLL_INTERVAL_MAX;
+	} else if (of_device_is_compatible(np, "marvell,xmdio")) {
+		ops->is_done = xsmi_is_done;
+		ops->is_read_valid = xsmi_is_read_valid;
+		ops->start_read = xsmi_start_read_op;
+		ops->read = xsmi_read_op;
+		ops->write = xsmi_write_op;
+
+		dev->poll_interval_min = MVMDIO_XSMI_POLL_INTERVAL_MIN;
+		dev->poll_interval_max = MVMDIO_XSMI_POLL_INTERVAL_MAX;
+	} else {
+		return -EINVAL;
+	}

Instead of doing this, you could have the ops structure declared e.g: a
static global variables in the driver and reference them from the
of_device_id .data field, something like:

static struct orion_mdio_ops mdio_ops = {
	...
};

In this case, don't forget the "const" for static structures containing
only function pointers (so that the function pointers can't be exploited.)

-- 
RMK's Patch system: http://www.armlinux.org.uk/developer/patches/
FTTC broadband for 0.8mile line: currently at 9.6Mbps down 400kbps up
according to speedtest.net.

[PATCH 7/9] net: mvmdio: add xmdio support

From: Antoine Tenart <hidden>
Date: 2017-06-07 16:13:33

Hi Florian,

On Wed, Jun 07, 2017 at 08:48:06AM -0700, Florian Fainelli wrote:

On 06/07/2017 01:38 AM, Antoine Tenart wrote:

quoted

+	if (of_device_is_compatible(np, "marvell,orion-mdio")) {
+		ops->is_done = smi_is_done;
+		ops->is_read_valid = smi_is_read_valid;
+		ops->start_read = smi_start_read_op;
+		ops->read = smi_read_op;
+		ops->write = smi_write_op;
+
+		dev->poll_interval_min = MVMDIO_SMI_POLL_INTERVAL_MIN;
+		dev->poll_interval_max = MVMDIO_SMI_POLL_INTERVAL_MAX;
+	} else if (of_device_is_compatible(np, "marvell,xmdio")) {
+		ops->is_done = xsmi_is_done;
+		ops->is_read_valid = xsmi_is_read_valid;
+		ops->start_read = xsmi_start_read_op;
+		ops->read = xsmi_read_op;
+		ops->write = xsmi_write_op;
+
+		dev->poll_interval_min = MVMDIO_XSMI_POLL_INTERVAL_MIN;
+		dev->poll_interval_max = MVMDIO_XSMI_POLL_INTERVAL_MAX;
+	} else {
+		return -EINVAL;
+	}

Instead of doing this, you could have the ops structure declared e.g: a
static global variables in the driver and reference them from the
of_device_id .data field, something like:

Good idea, I'll update the series using static global variables for ops
and poll intervals and reference them in the .data field.

Thanks!
Antoine

-- 
Antoine Ténart, Free Electrons
Embedded Linux and Kernel engineering
http://free-electrons.com

[PATCH 1/9] net: mvmdio: reorder headers alphabetically

From: Florian Fainelli <f.fainelli@gmail.com>
Date: 2017-06-07 19:24:05

On 06/07/2017 01:38 AM, Antoine Tenart wrote:

Cosmetic fix reordering headers alphabetically.

Signed-off-by: Antoine Tenart <redacted>

Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
-- 
Florian

[PATCH 2/9] net: mvmdio: use tabs for defines

From: Florian Fainelli <f.fainelli@gmail.com>
Date: 2017-06-07 19:24:28

On 06/07/2017 01:38 AM, Antoine Tenart wrote:

Cosmetic patch replacing spaces by tabs for defined values.

Signed-off-by: Antoine Tenart <redacted>

Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
-- 
Florian

[PATCH 3/9] net: mvmdio: use GENMASK for masks

From: Florian Fainelli <f.fainelli@gmail.com>
Date: 2017-06-07 19:24:40

On 06/07/2017 01:38 AM, Antoine Tenart wrote:

Cosmetic patch to use the GENMASK helper for masks.

Signed-off-by: Antoine Tenart <redacted>

Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
-- 
Florian

[PATCH 6/9] net: mvmdio: put the poll intervals in the private structure

From: Florian Fainelli <f.fainelli@gmail.com>
Date: 2017-06-07 19:25:26

On 06/07/2017 01:38 AM, Antoine Tenart wrote:

Put the two poll intervals (min and max) in the driver's private
structure. This is needed to add the xmdio support later.

Signed-off-by: Antoine Tenart <redacted>

Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
-- 
Florian

[PATCH 5/9] net: mvmdio: introduce an ops structure

From: Florian Fainelli <f.fainelli@gmail.com>
Date: 2017-06-07 19:28:28

On 06/07/2017 01:38 AM, Antoine Tenart wrote:

quoted hunk

Introduce an ops structure to add an indirection on functions accessing
the registers. This is needed to add the xMDIO support later.

Signed-off-by: Antoine Tenart <redacted>
---
 drivers/net/ethernet/marvell/mvmdio.c | 65 +++++++++++++++++++++++++++--------
 1 file changed, 51 insertions(+), 14 deletions(-)

diff --git a/drivers/net/ethernet/marvell/mvmdio.c b/drivers/net/ethernet/marvell/mvmdio.c
index 56bbe3990590..8a71ef93a61b 100644
--- a/drivers/net/ethernet/marvell/mvmdio.c
+++ b/drivers/net/ethernet/marvell/mvmdio.c

@@ -62,6 +62,15 @@ struct orion_mdio_dev {
 	 */
 	int err_interrupt;
 	wait_queue_head_t smi_busy_wait;
+	struct orion_mdio_ops *ops;
+};
+
+struct orion_mdio_ops {
+	int (*is_done)(struct orion_mdio_dev *);
+	int (*is_read_valid)(struct orion_mdio_dev *);
+	void (*start_read)(struct orion_mdio_dev *, int, int);
+	u16 (*read)(struct orion_mdio_dev *);
+	void (*write)(struct orion_mdio_dev *, int, int, u16);
 };
 
 static int orion_mdio_smi_is_done(struct orion_mdio_dev *dev)

@@ -74,6 +83,30 @@ static int orion_mdio_smi_is_read_valid(struct orion_mdio_dev *dev)
 	return !(readl(dev->regs) & MVMDIO_SMI_READ_VALID);
 }
 
+static void orion_mdio_start_read_op(struct orion_mdio_dev *dev, int mii_id,
+				     int regnum)
+{
+	writel(((mii_id << MVMDIO_SMI_PHY_ADDR_SHIFT) |
+		(regnum << MVMDIO_SMI_PHY_REG_SHIFT)  |
+		MVMDIO_SMI_READ_OPERATION),
+	       dev->regs);
+}

25 more quoted lines

Nit: you could actually keep this function (and all of them that have a
corresponding dev->ops function pointer) and just make it a static
inline that calls into dev->ops->is_done()

That would limit the delta to review, and it would still be within the
namespace of the driver (orion_mdio_*).

Your call.

quoted hunk

 			return 0;
 	        else if (timedout)
 			break;

@@ -103,8 +136,7 @@ static int orion_mdio_wait_ready(struct mii_bus *bus)
 			if (timeout < 2)
 				timeout = 2;
 			wait_event_timeout(dev->smi_busy_wait,
-				           orion_mdio_smi_is_done(dev),
-				           timeout);
+				           dev->ops->is_done(dev), timeout);
 
 			++timedout;
 	        }
@@ -126,22 +158,19 @@ static int orion_mdio_read(struct mii_bus *bus, int mii_id,
 	if (ret < 0)
 		goto out;
 
-	writel(((mii_id << MVMDIO_SMI_PHY_ADDR_SHIFT) |
-		(regnum << MVMDIO_SMI_PHY_REG_SHIFT)  |
-		MVMDIO_SMI_READ_OPERATION),
-	       dev->regs);
+	dev->ops->start_read(dev, mii_id, regnum);
 
 	ret = orion_mdio_wait_ready(bus);
 	if (ret < 0)
 		goto out;
 
-	if (orion_mdio_smi_is_read_valid(dev)) {
+	if (dev->ops->is_read_valid(dev)) {
 		dev_err(bus->parent, "SMI bus read not valid\n");
 		ret = -ENODEV;
 		goto out;
 	}
 
-	ret = readl(dev->regs) & GENMASK(15,0);
+	ret = dev->ops->read(dev);
 out:
 	mutex_unlock(&dev->lock);
 	return ret;
@@ -159,11 +188,7 @@ static int orion_mdio_write(struct mii_bus *bus, int mii_id,

39 more quoted lines


-- 
Florian

[PATCH 9/9] arm64: marvell: dts: add xmdio nodes for 7k/8k

From: Antoine Tenart <hidden>
Date: 2017-06-08 08:45:15

Hi Gregory,

On Wed, Jun 07, 2017 at 10:38:10AM +0200, Antoine Tenart wrote:

quoted hunk

diff --git a/arch/arm64/boot/dts/marvell/armada-cp110-slave.dtsi b/arch/arm64/boot/dts/marvell/armada-cp110-slave.dtsi
index 2a99ff8fca2a..594356243ddb 100644
--- a/arch/arm64/boot/dts/marvell/armada-cp110-slave.dtsi
+++ b/arch/arm64/boot/dts/marvell/armada-cp110-slave.dtsi

@@ -103,6 +103,13 @@
 				clocks = <&cps_syscon0 1 9>, <&cps_syscon0 1 5>;
 			};
 
+			cps_xmdio: mdio@12a600 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				compatible = "marvell,xmdio";
+				reg = <0x12a600 0x10>;
+			};
+

Russell pointed out on IRC the mdio/xmdio interfaces aren't wired to
anything on the mcbin. We could either disable these interfaces by
default, or add explicit disables in the mcbin device tree.

What's your thoughts on this?

Thanks!
Antoine

-- 
Antoine Ténart, Free Electrons
Embedded Linux and Kernel engineering
http://free-electrons.com

[PATCH 9/9] arm64: marvell: dts: add xmdio nodes for 7k/8k

From: Antoine Tenart <hidden>
Date: 2017-06-08 08:51:27

On Thu, Jun 08, 2017 at 10:45:15AM +0200, Antoine Tenart wrote:

On Wed, Jun 07, 2017 at 10:38:10AM +0200, Antoine Tenart wrote:

quoted

diff --git a/arch/arm64/boot/dts/marvell/armada-cp110-slave.dtsi b/arch/arm64/boot/dts/marvell/armada-cp110-slave.dtsi
index 2a99ff8fca2a..594356243ddb 100644
--- a/arch/arm64/boot/dts/marvell/armada-cp110-slave.dtsi
+++ b/arch/arm64/boot/dts/marvell/armada-cp110-slave.dtsi

@@ -103,6 +103,13 @@
 				clocks = <&cps_syscon0 1 9>, <&cps_syscon0 1 5>;
 			};
 
+			cps_xmdio: mdio@12a600 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				compatible = "marvell,xmdio";
+				reg = <0x12a600 0x10>;
+			};
+

Russell pointed out on IRC the mdio/xmdio interfaces aren't wired to
anything on the mcbin.

The ones found in the cp110 slave *

Antoine

-- 
Antoine Ténart, Free Electrons
Embedded Linux and Kernel engineering
http://free-electrons.com

`h`	back out one level
`j`	next message in thread
`k`	previous message in thread
`l`	drill in
`Esc`	close help / fold thread tree
`?`	toggle this help