[PATCH net 0/2] bnxt_en: Error handling and netpoll fixes.

STALE3400d

4 messages, 2 authors, 2017-06-23 · open the first message on its own page

[PATCH net 0/2] bnxt_en: Error handling and netpoll fixes.

From: Michael Chan <michael.chan@broadcom.com>
Date: 2017-06-23 18:01:15

Add missing error handling and fix netpoll handling.  The current code
handles RX and TX events in netpoll mode and is causing lots of warnings
and errors in the RX code path in netpoll mode.  The fix is to only handle
TX events in netpoll mode.

Michael Chan (2):
  bnxt_en: Add missing logic to handle TPA end error conditions.
  bnxt_en: Fix netpoll handling.

 drivers/net/ethernet/broadcom/bnxt/bnxt.c | 61 ++++++++++++++++++++++++++-----
 drivers/net/ethernet/broadcom/bnxt/bnxt.h |  6 ++-
 2 files changed, 57 insertions(+), 10 deletions(-)

-- 
1.8.3.1

[PATCH net 2/2] bnxt_en: Fix netpoll handling.

From: Michael Chan <michael.chan@broadcom.com>
Date: 2017-06-23 18:01:17

To handle netpoll properly, the driver must only handle TX packets
during NAPI.  Handling RX events cause warnings and errors in
netpoll mode. The ndo_poll_controller() method should call
napi_schedule() directly so that a NAPI weight of zero will be used
during netpoll mode.

The bnxt_en driver supports 2 ring modes: combined, and separate rx/tx.
In separate rx/tx mode, the ndo_poll_controller() method will only
process the tx rings.  In combined mode, the rx and tx completion
entries are mixed in the completion ring and we need to drop the rx
entries and recycle the rx buffers.

Add a function bnxt_force_rx_discard() to handle this in netpoll mode
when we see rx entries in combined ring mode.

Reported-by: Calvin Owens <redacted>
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
---
 drivers/net/ethernet/broadcom/bnxt/bnxt.c | 54 +++++++++++++++++++++++++++----
 1 file changed, 48 insertions(+), 6 deletions(-)
diff --git a/drivers/net/ethernet/broadcom/bnxt/bnxt.c b/drivers/net/ethernet/broadcom/bnxt/bnxt.c
index f5ba8ec..74e8e21 100644
--- a/drivers/net/ethernet/broadcom/bnxt/bnxt.c
+++ b/drivers/net/ethernet/broadcom/bnxt/bnxt.c
@@ -1563,6 +1563,45 @@ static int bnxt_rx_pkt(struct bnxt *bp, struct bnxt_napi *bnapi, u32 *raw_cons,
 	return rc;
 }
 
+/* In netpoll mode, if we are using a combined completion ring, we need to
+ * discard the rx packets and recycle the buffers.
+ */
+static int bnxt_force_rx_discard(struct bnxt *bp, struct bnxt_napi *bnapi,
+				 u32 *raw_cons, u8 *event)
+{
+	struct bnxt_cp_ring_info *cpr = &bnapi->cp_ring;
+	u32 tmp_raw_cons = *raw_cons;
+	struct rx_cmp_ext *rxcmp1;
+	struct rx_cmp *rxcmp;
+	u16 cp_cons;
+	u8 cmp_type;
+
+	cp_cons = RING_CMP(tmp_raw_cons);
+	rxcmp = (struct rx_cmp *)
+			&cpr->cp_desc_ring[CP_RING(cp_cons)][CP_IDX(cp_cons)];
+
+	tmp_raw_cons = NEXT_RAW_CMP(tmp_raw_cons);
+	cp_cons = RING_CMP(tmp_raw_cons);
+	rxcmp1 = (struct rx_cmp_ext *)
+			&cpr->cp_desc_ring[CP_RING(cp_cons)][CP_IDX(cp_cons)];
+
+	if (!RX_CMP_VALID(rxcmp1, tmp_raw_cons))
+		return -EBUSY;
+
+	cmp_type = RX_CMP_TYPE(rxcmp);
+	if (cmp_type == CMP_TYPE_RX_L2_CMP) {
+		rxcmp1->rx_cmp_cfa_code_errors_v2 |=
+			cpu_to_le32(RX_CMPL_ERRORS_CRC_ERROR);
+	} else if (cmp_type == CMP_TYPE_RX_L2_TPA_END_CMP) {
+		struct rx_tpa_end_cmp_ext *tpa_end1;
+
+		tpa_end1 = (struct rx_tpa_end_cmp_ext *)rxcmp1;
+		tpa_end1->rx_tpa_end_cmp_errors_v2 |=
+			cpu_to_le32(RX_TPA_END_CMP_ERRORS);
+	}
+	return bnxt_rx_pkt(bp, bnapi, raw_cons, event);
+}
+
 #define BNXT_GET_EVENT_PORT(data)	\
 	((data) &			\
 	 ASYNC_EVENT_CMPL_PORT_CONN_NOT_ALLOWED_EVENT_DATA1_PORT_ID_MASK)
@@ -1745,7 +1784,11 @@ static int bnxt_poll_work(struct bnxt *bp, struct bnxt_napi *bnapi, int budget)
 			if (unlikely(tx_pkts > bp->tx_wake_thresh))
 				rx_pkts = budget;
 		} else if ((TX_CMP_TYPE(txcmp) & 0x30) == 0x10) {
-			rc = bnxt_rx_pkt(bp, bnapi, &raw_cons, &event);
+			if (likely(budget))
+				rc = bnxt_rx_pkt(bp, bnapi, &raw_cons, &event);
+			else
+				rc = bnxt_force_rx_discard(bp, bnapi, &raw_cons,
+							   &event);
 			if (likely(rc >= 0))
 				rx_pkts += rc;
 			else if (rc == -EBUSY)	/* partial completion */
@@ -6664,12 +6707,11 @@ static void bnxt_poll_controller(struct net_device *dev)
 	struct bnxt *bp = netdev_priv(dev);
 	int i;
 
-	for (i = 0; i < bp->cp_nr_rings; i++) {
-		struct bnxt_irq *irq = &bp->irq_tbl[i];
+	/* Only process tx rings/combined rings in netpoll mode. */
+	for (i = 0; i < bp->tx_nr_rings; i++) {
+		struct bnxt_tx_ring_info *txr = &bp->tx_ring[i];
 
-		disable_irq(irq->vector);
-		irq->handler(irq->vector, bp->bnapi[i]);
-		enable_irq(irq->vector);
+		napi_schedule(&txr->bnapi->napi);
 	}
 }
 #endif
-- 
1.8.3.1

[PATCH net 1/2] bnxt_en: Add missing logic to handle TPA end error conditions.

From: Michael Chan <michael.chan@broadcom.com>
Date: 2017-06-23 18:01:17

When we get a TPA_END completion to handle a completed LRO packet, it
is possible that hardware would indicate errors.  The current code is
not checking for the error condition.  Define the proper error bits and
the macro to check for this error and abort properly.

Signed-off-by: Michael Chan <michael.chan@broadcom.com>
---
 drivers/net/ethernet/broadcom/bnxt/bnxt.c | 7 ++++---
 drivers/net/ethernet/broadcom/bnxt/bnxt.h | 6 +++++-
 2 files changed, 9 insertions(+), 4 deletions(-)
diff --git a/drivers/net/ethernet/broadcom/bnxt/bnxt.c b/drivers/net/ethernet/broadcom/bnxt/bnxt.c
index 03f55da..f5ba8ec 100644
--- a/drivers/net/ethernet/broadcom/bnxt/bnxt.c
+++ b/drivers/net/ethernet/broadcom/bnxt/bnxt.c
@@ -1301,10 +1301,11 @@ static inline struct sk_buff *bnxt_tpa_end(struct bnxt *bp,
 		cp_cons = NEXT_CMP(cp_cons);
 	}
 
-	if (unlikely(agg_bufs > MAX_SKB_FRAGS)) {
+	if (unlikely(agg_bufs > MAX_SKB_FRAGS || TPA_END_ERRORS(tpa_end1))) {
 		bnxt_abort_tpa(bp, bnapi, cp_cons, agg_bufs);
-		netdev_warn(bp->dev, "TPA frags %d exceeded MAX_SKB_FRAGS %d\n",
-			    agg_bufs, (int)MAX_SKB_FRAGS);
+		if (agg_bufs > MAX_SKB_FRAGS)
+			netdev_warn(bp->dev, "TPA frags %d exceeded MAX_SKB_FRAGS %d\n",
+				    agg_bufs, (int)MAX_SKB_FRAGS);
 		return NULL;
 	}
 
diff --git a/drivers/net/ethernet/broadcom/bnxt/bnxt.h b/drivers/net/ethernet/broadcom/bnxt/bnxt.h
index 3ef42db..d46a850 100644
--- a/drivers/net/ethernet/broadcom/bnxt/bnxt.h
+++ b/drivers/net/ethernet/broadcom/bnxt/bnxt.h
@@ -374,12 +374,16 @@ struct rx_tpa_end_cmp_ext {
 
 	__le32 rx_tpa_end_cmp_errors_v2;
 	#define RX_TPA_END_CMP_V2				(0x1 << 0)
-	#define RX_TPA_END_CMP_ERRORS				(0x7fff << 1)
+	#define RX_TPA_END_CMP_ERRORS				(0x3 << 1)
 	#define RX_TPA_END_CMPL_ERRORS_SHIFT			 1
 
 	u32 rx_tpa_end_cmp_start_opaque;
 };
 
+#define TPA_END_ERRORS(rx_tpa_end_ext)					\
+	((rx_tpa_end_ext)->rx_tpa_end_cmp_errors_v2 &			\
+	 cpu_to_le32(RX_TPA_END_CMP_ERRORS))
+
 #define DB_IDX_MASK						0xffffff
 #define DB_IDX_VALID						(0x1 << 26)
 #define DB_IRQ_DIS						(0x1 << 27)
-- 
1.8.3.1

Re: [PATCH net 0/2] bnxt_en: Error handling and netpoll fixes.

From: David Miller <davem@davemloft.net>
Date: 2017-06-23 18:53:22

From: Michael Chan <michael.chan@broadcom.com>
Date: Fri, 23 Jun 2017 14:00:59 -0400
Add missing error handling and fix netpoll handling.  The current code
handles RX and TX events in netpoll mode and is causing lots of warnings
and errors in the RX code path in netpoll mode.  The fix is to only handle
TX events in netpoll mode.
Series applied, thanks.
Keyboard shortcuts
hback out one level
jnext message in thread
kprevious message in thread
ldrill in
Escclose help / fold thread tree
?toggle this help