[PATCH v5 net-next 2/5] phy: micrel: add Microchip KSZ 9477 Switch PHY support
From: <Woojung.Huh@microchip.com>
Date: 2017-05-31 00:00:55
Subsystem:
ethernet phy library, networking drivers, the rest · Maintainers:
Andrew Lunn, Heiner Kallweit, Andrew Lunn, "David S. Miller", Eric Dumazet, Jakub Kicinski, Paolo Abeni, Linus Torvalds
From: Woojung Huh <Woojung.Huh@microchip.com> Adding Microchip 9477 Phy included in KSZ9477 Switch. Reviewed-by: Andrew Lunn <andrew@lunn.ch> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: Woojung Huh <Woojung.Huh@microchip.com> --- drivers/net/phy/micrel.c | 11 +++++++++++ include/linux/micrel_phy.h | 2 ++ 2 files changed, 13 insertions(+)
diff --git a/drivers/net/phy/micrel.c b/drivers/net/phy/micrel.c
index 4cfd541..46e80bc 100644
--- a/drivers/net/phy/micrel.c
+++ b/drivers/net/phy/micrel.c@@ -20,6 +20,7 @@ * ksz8081, ksz8091, * ksz8061, * Switch : ksz8873, ksz886x + * ksz9477 */ #include <linux/kernel.h>
@@ -996,6 +997,16 @@ static struct phy_driver ksphy_driver[] = { .read_status = ksz8873mll_read_status, .suspend = genphy_suspend, .resume = genphy_resume, +}, { + .phy_id = PHY_ID_KSZ9477, + .phy_id_mask = MICREL_PHY_ID_MASK, + .name = "Microchip KSZ9477", + .features = PHY_GBIT_FEATURES, + .config_init = kszphy_config_init, + .config_aneg = genphy_config_aneg, + .read_status = genphy_read_status, + .suspend = genphy_suspend, + .resume = genphy_resume, } }; module_phy_driver(ksphy_driver);
diff --git a/include/linux/micrel_phy.h b/include/linux/micrel_phy.h
index f541da6..472fa4d 100644
--- a/include/linux/micrel_phy.h
+++ b/include/linux/micrel_phy.h@@ -37,6 +37,8 @@ #define PHY_ID_KSZ8795 0x00221550 +#define PHY_ID_KSZ9477 0x00221631 + /* struct phy_device dev_flags definitions */ #define MICREL_PHY_50MHZ_CLK 0x00000001 #define MICREL_PHY_FXEN 0x00000002
--
2.7.4