[PATCH v3] net: mvneta: support suspend and resume
From: Jane Li <hidden>
Date: 2017-03-16 07:39:33
Add basic support for handling suspend and resume. Signed-off-by: Jane Li <redacted> --- Since v2: - use SIMPLE_DEV_PM_OPS instead of SET_LATE_SYSTEM_SLEEP_PM_OPS Since v1: - add mvneta_conf_mbus_windows() and mvneta_bm_port_init() in mvneta_resume() drivers/net/ethernet/marvell/mvneta.c | 60 ++++++++++++++++++++++++++++++++--- 1 file changed, 56 insertions(+), 4 deletions(-)
diff --git a/drivers/net/ethernet/marvell/mvneta.c b/drivers/net/ethernet/marvell/mvneta.c
index 61dd446..b0fea26 100644
--- a/drivers/net/ethernet/marvell/mvneta.c
+++ b/drivers/net/ethernet/marvell/mvneta.c@@ -431,6 +431,7 @@ struct mvneta_port { /* Flags for special SoC configurations */ bool neta_armada3700; u16 rx_offset_correction; + const struct mbus_dram_target_info *dram_target_info; }; /* The mvneta_tx_desc and mvneta_rx_desc structures describe the
@@ -4118,7 +4119,6 @@ static int mvneta_port_power_up(struct mvneta_port *pp, int phy_mode) /* Device initialization routine */ static int mvneta_probe(struct platform_device *pdev) { - const struct mbus_dram_target_info *dram_target_info; struct resource *res; struct device_node *dn = pdev->dev.of_node; struct device_node *phy_node;
@@ -4267,13 +4267,13 @@ static int mvneta_probe(struct platform_device *pdev) pp->tx_csum_limit = tx_csum_limit; - dram_target_info = mv_mbus_dram_info(); + pp->dram_target_info = mv_mbus_dram_info(); /* Armada3700 requires setting default configuration of Mbus * windows, however without using filled mbus_dram_target_info * structure. */ - if (dram_target_info || pp->neta_armada3700) - mvneta_conf_mbus_windows(pp, dram_target_info); + if (pp->dram_target_info || pp->neta_armada3700) + mvneta_conf_mbus_windows(pp, pp->dram_target_info); pp->tx_ring_size = MVNETA_MAX_TXD; pp->rx_ring_size = MVNETA_MAX_RXD;
@@ -4405,6 +4405,57 @@ static int mvneta_remove(struct platform_device *pdev) return 0; } +#ifdef CONFIG_PM_SLEEP +static int mvneta_suspend(struct device *device) +{ + struct net_device *dev = dev_get_drvdata(device); + struct mvneta_port *pp = netdev_priv(dev); + + if (netif_running(dev)) + mvneta_stop(dev); + netif_device_detach(dev); + clk_disable_unprepare(pp->clk_bus); + clk_disable_unprepare(pp->clk); + return 0; +} + +static int mvneta_resume(struct device *device) +{ + struct platform_device *pdev = to_platform_device(device); + struct net_device *dev = dev_get_drvdata(device); + struct mvneta_port *pp = netdev_priv(dev); + int err; + + clk_prepare_enable(pp->clk); + clk_prepare_enable(pp->clk_bus); + if (pp->dram_target_info || pp->neta_armada3700) + mvneta_conf_mbus_windows(pp, pp->dram_target_info); + if (pp->bm_priv) { + err = mvneta_bm_port_init(pdev, pp); + if (err < 0) { + dev_info(&pdev->dev, "use SW buffer management\n"); + pp->bm_priv = NULL; + } + } + mvneta_defaults_set(pp); + err = mvneta_port_power_up(pp, pp->phy_interface); + if (err < 0) { + dev_err(device, "can't power up port\n"); + return err; + } + + if (pp->use_inband_status) + mvneta_fixed_link_update(pp, dev->phydev); + + netif_device_attach(dev); + if (netif_running(dev)) + mvneta_open(dev); + return 0; +} +#endif + +static SIMPLE_DEV_PM_OPS(mvneta_pm_ops, mvneta_suspend, mvneta_resume); + static const struct of_device_id mvneta_match[] = { { .compatible = "marvell,armada-370-neta" }, { .compatible = "marvell,armada-xp-neta" },
@@ -4419,6 +4470,7 @@ static int mvneta_remove(struct platform_device *pdev) .driver = { .name = MVNETA_DRIVER_NAME, .of_match_table = mvneta_match, + .pm = &mvneta_pm_ops, }, };
--
1.9.1