[PATCH net-next] liquidio: use meaningful names for IRQs

Subsystems: cavium liquidio network driver, networking drivers, the rest

STALE3406d

7 messages, 6 authors, 2017-04-03 · open the first message on its own page

[PATCH net-next] liquidio: use meaningful names for IRQs

From: Felix Manlunas <hidden>
Date: 2017-03-13 19:58:18 

From: Rick Farrington <redacted>

All IRQs owned by the PF and VF drivers share the same nondescript name
"octeon"; this makes it difficult to setup interrupt affinity.

Change the IRQ names to reflect their specific purpose:

    LiquidIO<id>-<func>-<type>-<queue pair num>

Examples:
    LiquidIO0-pf0-rxtx-3
    LiquidIO1-vf1-rxtx-0
    LiquidIO0-pf0-aux

We cannot use netdev->name for naming the IRQs because:

    1.  Early during init, the PF and VF drivers require interrupts to
        send/receive control data from the NIC firmware; so the PF and VF
        must request IRQs long before the netdev struct is registered.

    2.  The IRQ name can only be specified at the time it is requested.
        It cannot be changed after that.

Signed-off-by: Rick Farrington <redacted>
Signed-off-by: Felix Manlunas <redacted>
Signed-off-by: Satanand Burla <redacted>
---
 drivers/net/ethernet/cavium/liquidio/lio_main.c    | 72 ++++++++++++++++++----
 drivers/net/ethernet/cavium/liquidio/lio_vf_main.c | 37 +++++++++--
 .../net/ethernet/cavium/liquidio/liquidio_common.h |  5 ++
 .../net/ethernet/cavium/liquidio/octeon_device.h   |  3 +
 4 files changed, 101 insertions(+), 16 deletions(-)

diff --git a/drivers/net/ethernet/cavium/liquidio/lio_main.c b/drivers/net/ethernet/cavium/liquidio/lio_main.c
index be9c0e3..3c5de81 100644
--- a/drivers/net/ethernet/cavium/liquidio/lio_main.c
+++ b/drivers/net/ethernet/cavium/liquidio/lio_main.c
@@ -1076,16 +1076,35 @@ static int octeon_setup_interrupt(struct octeon_device *oct)
 	int i;
 	int num_ioq_vectors;
 	int num_alloc_ioq_vectors;
+	char *queue_irq_names = NULL;
+	char *aux_irq_name = NULL;
 
 	if (OCTEON_CN23XX_PF(oct) && oct->msix_on) {
 		oct->num_msix_irqs = oct->sriov_info.num_pf_rings;
 		/* one non ioq interrupt for handling sli_mac_pf_int_sum */
 		oct->num_msix_irqs += 1;
 
+		/* allocate storage for the names assigned to each irq */
+		oct->irq_name_storage =
+			kcalloc((MAX_IOQ_INTERRUPTS_PER_PF + 1), INTRNAMSIZ,
+				GFP_KERNEL);
+		if (!oct->irq_name_storage) {
+			dev_err(&oct->pci_dev->dev, "Irq name storage alloc failed...\n");
+			return -ENOMEM;
+		}
+
+		queue_irq_names = oct->irq_name_storage;
+		aux_irq_name = &queue_irq_names
+				[IRQ_NAME_OFF(MAX_IOQ_INTERRUPTS_PER_PF)];
+
 		oct->msix_entries = kcalloc(
 		    oct->num_msix_irqs, sizeof(struct msix_entry), GFP_KERNEL);
-		if (!oct->msix_entries)
-			return 1;
+		if (!oct->msix_entries) {
+			dev_err(&oct->pci_dev->dev, "Memory Alloc failed...\n");
+			kfree(oct->irq_name_storage);
+			oct->irq_name_storage = NULL;
+			return -ENOMEM;
+		}
 
 		msix_entries = (struct msix_entry *)oct->msix_entries;
 		/*Assumption is that pf msix vectors start from pf srn to pf to
@@ -1103,7 +1122,9 @@ static int octeon_setup_interrupt(struct octeon_device *oct)
 			dev_err(&oct->pci_dev->dev, "unable to Allocate MSI-X interrupts\n");
 			kfree(oct->msix_entries);
 			oct->msix_entries = NULL;
-			return 1;
+			kfree(oct->irq_name_storage);
+			oct->irq_name_storage = NULL;
+			return num_alloc_ioq_vectors;
 		}
 		dev_dbg(&oct->pci_dev->dev, "OCTEON: Enough MSI-X interrupts are allocated...\n");
 
@@ -1111,9 +1132,12 @@ static int octeon_setup_interrupt(struct octeon_device *oct)
 
 		/** For PF, there is one non-ioq interrupt handler */
 		num_ioq_vectors -= 1;
+
+		snprintf(aux_irq_name, INTRNAMSIZ,
+			 "LiquidIO%u-pf%u-aux", oct->octeon_id, oct->pf_num);
 		irqret = request_irq(msix_entries[num_ioq_vectors].vector,
-				     liquidio_legacy_intr_handler, 0, "octeon",
-				     oct);
+				     liquidio_legacy_intr_handler, 0,
+				     aux_irq_name, oct);
 		if (irqret) {
 			dev_err(&oct->pci_dev->dev,
 				"OCTEON: Request_irq failed for MSIX interrupt Error: %d\n",
@@ -1121,13 +1145,20 @@ static int octeon_setup_interrupt(struct octeon_device *oct)
 			pci_disable_msix(oct->pci_dev);
 			kfree(oct->msix_entries);
 			oct->msix_entries = NULL;
-			return 1;
+			kfree(oct->irq_name_storage);
+			oct->irq_name_storage = NULL;
+			return irqret;
 		}
 
 		for (i = 0; i < num_ioq_vectors; i++) {
+			snprintf(&queue_irq_names[IRQ_NAME_OFF(i)], INTRNAMSIZ,
+				 "LiquidIO%u-pf%u-rxtx-%u",
+				 oct->octeon_id, oct->pf_num, i);
+
 			irqret = request_irq(msix_entries[i].vector,
 					     liquidio_msix_intr_handler, 0,
-					     "octeon", &oct->ioq_vector[i]);
+					     &queue_irq_names[IRQ_NAME_OFF(i)],
+					     &oct->ioq_vector[i]);
 			if (irqret) {
 				dev_err(&oct->pci_dev->dev,
 					"OCTEON: Request_irq failed for MSIX interrupt Error: %d\n",
@@ -1147,7 +1178,9 @@ static int octeon_setup_interrupt(struct octeon_device *oct)
 				pci_disable_msix(oct->pci_dev);
 				kfree(oct->msix_entries);
 				oct->msix_entries = NULL;
-				return 1;
+				kfree(oct->irq_name_storage);
+				oct->irq_name_storage = NULL;
+				return irqret;
 			}
 			oct->ioq_vector[i].vector = msix_entries[i].vector;
 			/* assign the cpu mask for this msix interrupt vector */
@@ -1165,15 +1198,29 @@ static int octeon_setup_interrupt(struct octeon_device *oct)
 		else
 			oct->flags |= LIO_FLAG_MSI_ENABLED;
 
+		/* allocate storage for the names assigned to the irq */
+		oct->irq_name_storage = kcalloc(1, INTRNAMSIZ, GFP_KERNEL);
+		if (!oct->irq_name_storage)
+			return -ENOMEM;
+
+		queue_irq_names = oct->irq_name_storage;
+
+		snprintf(&queue_irq_names[IRQ_NAME_OFF(0)], INTRNAMSIZ,
+			 "LiquidIO%u-pf%u-rxtx-%u",
+			 oct->octeon_id, oct->pf_num, 0);
+
 		irqret = request_irq(oct->pci_dev->irq,
-				     liquidio_legacy_intr_handler, IRQF_SHARED,
-				     "octeon", oct);
+				     liquidio_legacy_intr_handler,
+				     IRQF_SHARED,
+				     &queue_irq_names[IRQ_NAME_OFF(0)], oct);
 		if (irqret) {
 			if (oct->flags & LIO_FLAG_MSI_ENABLED)
 				pci_disable_msi(oct->pci_dev);
 			dev_err(&oct->pci_dev->dev, "Request IRQ failed with code: %d\n",
 				irqret);
-			return 1;
+			kfree(oct->irq_name_storage);
+			oct->irq_name_storage = NULL;
+			return irqret;
 		}
 	}
 	return 0;
@@ -1441,6 +1488,9 @@ static void octeon_destroy_resources(struct octeon_device *oct)
 				pci_disable_msi(oct->pci_dev);
 		}
 
+		kfree(oct->irq_name_storage);
+		oct->irq_name_storage = NULL;
+
 	/* fallthrough */
 	case OCT_DEV_MSIX_ALLOC_VECTOR_DONE:
 		if (OCTEON_CN23XX_PF(oct))
diff --git a/drivers/net/ethernet/cavium/liquidio/lio_vf_main.c b/drivers/net/ethernet/cavium/liquidio/lio_vf_main.c
index 9d5e035..aeaefcb 100644
--- a/drivers/net/ethernet/cavium/liquidio/lio_vf_main.c
+++ b/drivers/net/ethernet/cavium/liquidio/lio_vf_main.c
@@ -750,6 +750,7 @@ liquidio_msix_intr_handler(int irq __attribute__((unused)), void *dev)
 static int octeon_setup_interrupt(struct octeon_device *oct)
 {
 	struct msix_entry *msix_entries;
+	char *queue_irq_names = NULL;
 	int num_alloc_ioq_vectors;
 	int num_ioq_vectors;
 	int irqret;
@@ -758,10 +759,25 @@ static int octeon_setup_interrupt(struct octeon_device *oct)
 	if (oct->msix_on) {
 		oct->num_msix_irqs = oct->sriov_info.rings_per_vf;
 
+		/* allocate storage for the names assigned to each irq */
+		oct->irq_name_storage =
+			kcalloc(MAX_IOQ_INTERRUPTS_PER_VF, INTRNAMSIZ,
+				GFP_KERNEL);
+		if (!oct->irq_name_storage) {
+			dev_err(&oct->pci_dev->dev, "Irq name storage alloc failed...\n");
+			return -ENOMEM;
+		}
+
+		queue_irq_names = oct->irq_name_storage;
+
 		oct->msix_entries = kcalloc(
 		    oct->num_msix_irqs, sizeof(struct msix_entry), GFP_KERNEL);
-		if (!oct->msix_entries)
-			return 1;
+		if (!oct->msix_entries) {
+			dev_err(&oct->pci_dev->dev, "Memory Alloc failed...\n");
+			kfree(oct->irq_name_storage);
+			oct->irq_name_storage = NULL;
+			return -ENOMEM;
+		}
 
 		msix_entries = (struct msix_entry *)oct->msix_entries;
 
@@ -775,16 +791,23 @@ static int octeon_setup_interrupt(struct octeon_device *oct)
 			dev_err(&oct->pci_dev->dev, "unable to Allocate MSI-X interrupts\n");
 			kfree(oct->msix_entries);
 			oct->msix_entries = NULL;
-			return 1;
+			kfree(oct->irq_name_storage);
+			oct->irq_name_storage = NULL;
+			return num_alloc_ioq_vectors;
 		}
 		dev_dbg(&oct->pci_dev->dev, "OCTEON: Enough MSI-X interrupts are allocated...\n");
 
 		num_ioq_vectors = oct->num_msix_irqs;
 
 		for (i = 0; i < num_ioq_vectors; i++) {
+			snprintf(&queue_irq_names[IRQ_NAME_OFF(i)], INTRNAMSIZ,
+				 "LiquidIO%u-vf%u-rxtx-%u",
+				 oct->octeon_id, oct->vf_num, i);
+
 			irqret = request_irq(msix_entries[i].vector,
 					     liquidio_msix_intr_handler, 0,
-					     "octeon", &oct->ioq_vector[i]);
+					     &queue_irq_names[IRQ_NAME_OFF(i)],
+					     &oct->ioq_vector[i]);
 			if (irqret) {
 				dev_err(&oct->pci_dev->dev,
 					"OCTEON: Request_irq failed for MSIX interrupt Error: %d\n",
@@ -800,7 +823,9 @@ static int octeon_setup_interrupt(struct octeon_device *oct)
 				pci_disable_msix(oct->pci_dev);
 				kfree(oct->msix_entries);
 				oct->msix_entries = NULL;
-				return 1;
+				kfree(oct->irq_name_storage);
+				oct->irq_name_storage = NULL;
+				return irqret;
 			}
 			oct->ioq_vector[i].vector = msix_entries[i].vector;
 			/* assign the cpu mask for this msix interrupt vector */
@@ -945,6 +970,8 @@ static void octeon_destroy_resources(struct octeon_device *oct)
 			pci_disable_msix(oct->pci_dev);
 			kfree(oct->msix_entries);
 			oct->msix_entries = NULL;
+			kfree(oct->irq_name_storage);
+			oct->irq_name_storage = NULL;
 		}
 		/* Soft reset the octeon device before exiting */
 		if (oct->pci_dev->reset_fn)
diff --git a/drivers/net/ethernet/cavium/liquidio/liquidio_common.h b/drivers/net/ethernet/cavium/liquidio/liquidio_common.h
index 294c6f3..4a07c0a 100644
--- a/drivers/net/ethernet/cavium/liquidio/liquidio_common.h
+++ b/drivers/net/ethernet/cavium/liquidio/liquidio_common.h
@@ -100,6 +100,11 @@ enum octeon_tag_type {
 
 #define BYTES_PER_DHLEN_UNIT        8
 #define MAX_REG_CNT                 2000000U
+#define INTRNAMSIZ                  32
+#define IRQ_NAME_OFF(i)             ((i) * INTRNAMSIZ)
+#define MAX_IOQ_INTERRUPTS_PER_PF   (64 * 2)
+#define MAX_IOQ_INTERRUPTS_PER_VF   (8 * 2)
+
 
 static inline u32 incr_index(u32 index, u32 count, u32 max)
 {
diff --git a/drivers/net/ethernet/cavium/liquidio/octeon_device.h b/drivers/net/ethernet/cavium/liquidio/octeon_device.h
index c301a38..8c5d33e 100644
--- a/drivers/net/ethernet/cavium/liquidio/octeon_device.h
+++ b/drivers/net/ethernet/cavium/liquidio/octeon_device.h
@@ -517,6 +517,9 @@ struct octeon_device {
 
 	void *msix_entries;
 
+	/* when requesting IRQs, the names are stored here */
+	void *irq_name_storage;
+
 	struct octeon_sriov_info sriov_info;
 
 	struct octeon_pf_vf_hs_word pfvf_hsword;

Re: [PATCH net-next] liquidio: use meaningful names for IRQs

From: David Miller <davem@davemloft.net>
Date: 2017-03-17 03:29:48 

From: Felix Manlunas <redacted>
Date: Mon, 13 Mar 2017 12:58:04 -0700

From: Rick Farrington <redacted>

All IRQs owned by the PF and VF drivers share the same nondescript name
"octeon"; this makes it difficult to setup interrupt affinity.

Change the IRQ names to reflect their specific purpose:

    LiquidIO<id>-<func>-<type>-<queue pair num>

Examples:
    LiquidIO0-pf0-rxtx-3
    LiquidIO1-vf1-rxtx-0
    LiquidIO0-pf0-aux

We cannot use netdev->name for naming the IRQs because:

    1.  Early during init, the PF and VF drivers require interrupts to
        send/receive control data from the NIC firmware; so the PF and VF
        must request IRQs long before the netdev struct is registered.

    2.  The IRQ name can only be specified at the time it is requested.
        It cannot be changed after that.

Signed-off-by: Rick Farrington <redacted>
Signed-off-by: Felix Manlunas <redacted>
Signed-off-by: Satanand Burla <redacted>
Applied, thank you.

RE: [PATCH net-next] liquidio: use meaningful names for IRQs

From: Mintz, Yuval <hidden>
Date: 2017-03-20 08:26:13

quoted
    2.  The IRQ name can only be specified at the time it is requested.
        It cannot be changed after that.
Is there any inherent difficulty in adding that capability?
I.e., to rename the IRQ's action & kthread.

It would allow drivers to re-name their IRQ names upon NETDEV_CHANGENAME.

Re: [PATCH net-next] liquidio: use meaningful names for IRQs

From: Stephen Hemminger <stephen@networkplumber.org>
Date: 2017-03-20 15:24:44 

On Mon, 13 Mar 2017 12:58:04 -0700
Felix Manlunas [off-list ref] wrote:

From: Rick Farrington <redacted>

All IRQs owned by the PF and VF drivers share the same nondescript name
"octeon"; this makes it difficult to setup interrupt affinity.

Change the IRQ names to reflect their specific purpose:

    LiquidIO<id>-<func>-<type>-<queue pair num>

Examples:
    LiquidIO0-pf0-rxtx-3
    LiquidIO1-vf1-rxtx-0
    LiquidIO0-pf0-aux

We cannot use netdev->name for naming the IRQs because:

    1.  Early during init, the PF and VF drivers require interrupts to
        send/receive control data from the NIC firmware; so the PF and VF
        must request IRQs long before the netdev struct is registered.

    2.  The IRQ name can only be specified at the time it is requested.
        It cannot be changed after that.

Signed-off-by: Rick Farrington <redacted>
Signed-off-by: Felix Manlunas <redacted>
Signed-off-by: Satanand Burla <redacted>
Irqbalance used to parse the interrupt names and expect the network device name.

Re: [PATCH net-next] liquidio: use meaningful names for IRQs

From: Sunil Kovvuri <hidden>
Date: 2017-04-03 09:55:50 

On Tue, Mar 14, 2017 at 1:28 AM, Felix Manlunas
[off-list ref] wrote:
From: Rick Farrington <redacted>

All IRQs owned by the PF and VF drivers share the same nondescript name
"octeon"; this makes it difficult to setup interrupt affinity.

Change the IRQ names to reflect their specific purpose:

    LiquidIO<id>-<func>-<type>-<queue pair num>

Examples:
    LiquidIO0-pf0-rxtx-3
    LiquidIO1-vf1-rxtx-0
    LiquidIO0-pf0-aux
Probably too late, but just my 2 cents.

If there are multiple LiquidIO cards connected in a system, wouldn't the same
issue of how to setup IRQ affinities arise ?
How do you map netdev->name to IRQ name ?

We cannot use netdev->name for naming the IRQs because:

    1.  Early during init, the PF and VF drivers require interrupts to
        send/receive control data from the NIC firmware; so the PF and VF
        must request IRQs long before the netdev struct is registered.

    2.  The IRQ name can only be specified at the time it is requested.
        It cannot be changed after that.
You can try splitting IRQ registration and register IRQs for sending/receiving
control data with above naming but for queues, IRQs can be registered after
netdev struct is registered.

Thanks,
Sunil.

RE: [PATCH net-next] liquidio: use meaningful names for IRQs

From: Ricardo Farrington <hidden>
Date: 2017-04-03 15:03:35 

Hi Sunil - this implementation was verified with multiple adapters installed.  In this case, the <id> field serves to differentiate the adapter.

    LiquidIO<id>-<func>-<type>-<queue pair num>
Rick


-----Original Message-----
From: Sunil Kovvuri [mailto:sunil.kovvuri@gmail.com] 
Sent: Monday, April 03, 2017 2:56 AM
To: Manlunas, Felix <redacted>
Cc: David S. Miller <davem@davemloft.net>; Linux Netdev List <redacted>; Vatsavayi, Raghu <redacted>; Chickles, Derek <redacted>; Burla, Satananda <redacted>; Ricardo Farrington <redacted>
Subject: Re: [PATCH net-next] liquidio: use meaningful names for IRQs

On Tue, Mar 14, 2017 at 1:28 AM, Felix Manlunas [off-list ref] wrote:
From: Rick Farrington <redacted>

All IRQs owned by the PF and VF drivers share the same nondescript 
name "octeon"; this makes it difficult to setup interrupt affinity.

Change the IRQ names to reflect their specific purpose:

    LiquidIO<id>-<func>-<type>-<queue pair num>

Examples:
    LiquidIO0-pf0-rxtx-3
    LiquidIO1-vf1-rxtx-0
    LiquidIO0-pf0-aux
Probably too late, but just my 2 cents.

If there are multiple LiquidIO cards connected in a system, wouldn't the same issue of how to setup IRQ affinities arise ?
How do you map netdev->name to IRQ name ?

We cannot use netdev->name for naming the IRQs because:

    1.  Early during init, the PF and VF drivers require interrupts to
        send/receive control data from the NIC firmware; so the PF and VF
        must request IRQs long before the netdev struct is registered.

    2.  The IRQ name can only be specified at the time it is requested.
        It cannot be changed after that.
You can try splitting IRQ registration and register IRQs for sending/receiving control data with above naming but for queues, IRQs can be registered after netdev struct is registered.

Thanks,
Sunil.

Re: [PATCH net-next] liquidio: use meaningful names for IRQs

From: Sunil Kovvuri <hidden>
Date: 2017-04-03 17:42:16 

On Mon, Apr 3, 2017 at 8:33 PM, Ricardo Farrington
[off-list ref] wrote:
Hi Sunil - this implementation was verified with multiple adapters installed.  In this case, the <id> field serves to differentiate the adapter.
quoted
    LiquidIO<id>-<func>-<type>-<queue pair num>
Rick
No, what I was referring to was, let's say there are two adapters, if
we do a unbind of driver and
then bind driver in reverse sequence, then the <id> of each adapter
will get exchanged. isn't it ?

If the above is true, the logical interface's name will still be the
same but the <id> is different,
so it's not easy to map a logical interface to it's registered IRQs,
hence doing affinity setting is still problematic.

But moreover it seems the driver is calling 'octeon_allocate_device()'
for each VF, so not sure how <id> field which
is derived from 'oct->octeon_id' helps in differentiating the adapter.
Is there only one VF per adapter ?

821 static int
822 liquidio_vf_probe(struct pci_dev *pdev,
823                   const struct pci_device_id *ent __attribute__((unused)))
824 {
825         struct octeon_device *oct_dev = NULL;
826
827         oct_dev = octeon_allocate_device(pdev->device,
828                                          sizeof(struct octeon_device_priv));
829

Thanks,
Sunil.
Keyboard shortcuts
hback out one level
jnext message in thread
kprevious message in thread
ldrill in
Escclose help / fold thread tree
?toggle this help