[PATCH] ath9k: Access rchan::buf only with per_cpu helper

Subsystems: atheros ath generic utilities, qualcomm atheros ath9k wireless driver, the rest

STALE3479d

2 messages, 2 authors, 2017-02-14 · open the first message on its own page

[PATCH] ath9k: Access rchan::buf only with per_cpu helper

From: Sven Eckelmann <hidden>
Date: 2017-02-13 15:56:48

The relayfs was changed to use per CPU constructs to handle the rchan
buffers. But the users of the rchan buffers in other parts of the kernel
were not modified. This caused crashes like

  BUG: unable to handle kernel paging request at 00003a5198a0b910
  IP: [<ffffffffa973cb3a>] ath_cmn_process_fft+0xea/0x610
  PGD 0 [  179.522449]
  Oops: 0000 [#1] SMP
  Modules linked in:
  CPU: 0 PID: 0 Comm: swapper/0 Not tainted 4.9.0-rc5 #1
  [...]
  Call Trace:
   <IRQ> [  179.656426]  [<ffffffffa9704373>] ? ath_rx_tasklet+0x2f3/0xd10
   [<ffffffffa9702106>] ? ath9k_tasklet+0x1b6/0x230
   [<ffffffffa90dcbd1>] ? tasklet_action+0xf1/0x100
   [<ffffffffa9a3cb3f>] ? __do_softirq+0xef/0x284
   [<ffffffffa90dd22e>] ? irq_exit+0xae/0xb0
   [<ffffffffa9a3c89f>] ? do_IRQ+0x4f/0xd0
   [<ffffffffa9a3aa42>] ? common_interrupt+0x82/0x82
   <EOI> [  179.703152]  [<ffffffffa9a39c1d>] ? poll_idle+0x2d/0x57
   [<ffffffffa908c845>] ? sched_clock+0x5/0x10
   [<ffffffffa97bc8d6>] ? cpuidle_enter_state+0xf6/0x2d0
   [<ffffffffa911988e>] ? cpu_startup_entry+0x14e/0x230
   [<ffffffffaa3cdf70>] ? start_kernel+0x461/0x481
   [<ffffffffaa3cd120>] ? early_idt_handler_array+0x120/0x120
   [<ffffffffaa3cd413>] ? x86_64_start_kernel+0x14c/0x170
  Code: 31 db 41 be ff ff ff ff 4c 8b 26 48 8b 6e 08 49 8b 84 24 60 05 00
        00 48 8b 00 0f b7 40 04 66 89 44 24 48 eb 11 48 8b 55 40 48 98 <48>
        8b 3c c2 e8 ad a0 a4 ff 01 c3 41 8d 56 01 be 00 02 00 00 48
  RIP  [<ffffffffa973cb3a>] ath_cmn_process_fft+0xea/0x610
   RSP <ffff9b43e7003d20>
  CR2: 00003a5198a0b910

Fixes: 017c59c042d0 ("relay: Use per CPU constructs for the relay channel buffer pointers")
Cc: Akash Goel <redacted>
Cc: Nick Kossifidis <redacted>
Reported-by: Mathias Kretschmer <redacted>
Signed-off-by: Sven Eckelmann <redacted>
---
 drivers/net/wireless/ath/ath9k/common-spectral.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/net/wireless/ath/ath9k/common-spectral.c b/drivers/net/wireless/ath/ath9k/common-spectral.c
index 789a3dbe8341..0ffa23a61568 100644
--- a/drivers/net/wireless/ath/ath9k/common-spectral.c
+++ b/drivers/net/wireless/ath/ath9k/common-spectral.c
@@ -482,7 +482,7 @@ ath_cmn_is_fft_buf_full(struct ath_spec_scan_priv *spec_priv)
 	struct rchan *rc = spec_priv->rfs_chan_spec_scan;
 
 	for_each_online_cpu(i)
-		ret += relay_buf_full(rc->buf[i]);
+		ret += relay_buf_full(*per_cpu_ptr(rc->buf, i));
 
 	i = num_online_cpus();
 

Re: ath9k: Access rchan::buf only with per_cpu helper

From: Kalle Valo <hidden>
Date: 2017-02-14 18:00:01

Sven Eckelmann [off-list ref] wrote:
The relayfs was changed to use per CPU constructs to handle the rchan
buffers. But the users of the rchan buffers in other parts of the kernel
were not modified. This caused crashes like

  BUG: unable to handle kernel paging request at 00003a5198a0b910
  IP: [<ffffffffa973cb3a>] ath_cmn_process_fft+0xea/0x610
  PGD 0 [  179.522449]
  Oops: 0000 [#1] SMP
  Modules linked in:
  CPU: 0 PID: 0 Comm: swapper/0 Not tainted 4.9.0-rc5 #1
  [...]
  Call Trace:
   <IRQ> [  179.656426]  [<ffffffffa9704373>] ? ath_rx_tasklet+0x2f3/0xd10
   [<ffffffffa9702106>] ? ath9k_tasklet+0x1b6/0x230
   [<ffffffffa90dcbd1>] ? tasklet_action+0xf1/0x100
   [<ffffffffa9a3cb3f>] ? __do_softirq+0xef/0x284
   [<ffffffffa90dd22e>] ? irq_exit+0xae/0xb0
   [<ffffffffa9a3c89f>] ? do_IRQ+0x4f/0xd0
   [<ffffffffa9a3aa42>] ? common_interrupt+0x82/0x82
   <EOI> [  179.703152]  [<ffffffffa9a39c1d>] ? poll_idle+0x2d/0x57
   [<ffffffffa908c845>] ? sched_clock+0x5/0x10
   [<ffffffffa97bc8d6>] ? cpuidle_enter_state+0xf6/0x2d0
   [<ffffffffa911988e>] ? cpu_startup_entry+0x14e/0x230
   [<ffffffffaa3cdf70>] ? start_kernel+0x461/0x481
   [<ffffffffaa3cd120>] ? early_idt_handler_array+0x120/0x120
   [<ffffffffaa3cd413>] ? x86_64_start_kernel+0x14c/0x170
  Code: 31 db 41 be ff ff ff ff 4c 8b 26 48 8b 6e 08 49 8b 84 24 60 05 00
        00 48 8b 00 0f b7 40 04 66 89 44 24 48 eb 11 48 8b 55 40 48 98 <48>
        8b 3c c2 e8 ad a0 a4 ff 01 c3 41 8d 56 01 be 00 02 00 00 48
  RIP  [<ffffffffa973cb3a>] ath_cmn_process_fft+0xea/0x610
   RSP <ffff9b43e7003d20>
  CR2: 00003a5198a0b910

Fixes: 017c59c042d0 ("relay: Use per CPU constructs for the relay channel buffer pointers")
Cc: Akash Goel <redacted>
Cc: Nick Kossifidis <mickflemm@gmail.com>
Reported-by: Mathias Kretschmer <redacted>
Signed-off-by: Sven Eckelmann <sven@narfation.org>
Patch applied to ath-next branch of ath.git, thanks.

07460b92db7c ath9k: Access rchan::buf only with per_cpu helper

-- 
https://patchwork.kernel.org/patch/9570191/

Documentation about submitting wireless patches and checking status
from patchwork:

https://wireless.wiki.kernel.org/en/developers/documentation/submittingpatches
Keyboard shortcuts
hback out one level
jnext message in thread
kprevious message in thread
ldrill in
Escclose help / fold thread tree
?toggle this help