[PATCH net-next 0/7] net: dsa: bcm_sf2: Add support for BCM7278

@@ -125,7 +125,7 @@ static inline u64 name##_readq(struct bcm_sf2_priv *priv, u32 off)	\
 {									\
 	u32 indir, dir;							\
 	spin_lock(&priv->indir_lock);					\
-	dir = __raw_readl(priv->name + off);				\
+	dir = name##_readl(priv, off);					\
 	indir = reg_readl(priv, REG_DIR_DATA_READ);			\
 	spin_unlock(&priv->indir_lock);					\
 	return (u64)indir << 32 | dir;					\

@@ -135,7 +135,7 @@ static inline void name##_writeq(struct bcm_sf2_priv *priv, u64 val,	\
 {									\
 	spin_lock(&priv->indir_lock);					\
 	reg_writel(priv, upper_32_bits(val), REG_DIR_DATA_WRITE);	\
-	__raw_writel(lower_32_bits(val), priv->name + off);		\
+	name##_writel(priv, lower_32_bits(val), off);			\
 	spin_unlock(&priv->indir_lock);					\
 }
 

@@ -1009,10 +1009,49 @@ static const struct dsa_switch_ops bcm_sf2_ops = {
 	.port_fdb_del		= b53_fdb_del,
 };
 
+struct bcm_sf2_of_data {
+	u32 type;
+	const u16 *reg_offsets;
+	unsigned int core_reg_align;
+};
+
+/* Register offsets for the SWITCH_REG_* block */
+static const u16 bcm_sf2_7445_reg_offsets[] = {
+	[REG_SWITCH_CNTRL]	= 0x00,
+	[REG_SWITCH_STATUS]	= 0x04,
+	[REG_DIR_DATA_WRITE]	= 0x08,
+	[REG_DIR_DATA_READ]	= 0x0C,
+	[REG_SWITCH_REVISION]	= 0x18,
+	[REG_PHY_REVISION]	= 0x1C,
+	[REG_SPHY_CNTRL]	= 0x2C,
+	[REG_RGMII_0_CNTRL]	= 0x34,
+	[REG_RGMII_1_CNTRL]	= 0x40,
+	[REG_RGMII_2_CNTRL]	= 0x4c,
+	[REG_LED_0_CNTRL]	= 0x90,
+	[REG_LED_1_CNTRL]	= 0x94,
+	[REG_LED_2_CNTRL]	= 0x98,
+};
+
+static const struct bcm_sf2_of_data bcm_sf2_7445_data = {
+	.type		= BCM7445_DEVICE_ID,
+	.core_reg_align	= 0,
+	.reg_offsets	= bcm_sf2_7445_reg_offsets,
+};
+
+static const struct of_device_id bcm_sf2_of_match[] = {
+	{ .compatible = "brcm,bcm7445-switch-v4.0",
+	  .data = &bcm_sf2_7445_data
+	},
+	{ /* sentinel */ },
+};
+MODULE_DEVICE_TABLE(of, bcm_sf2_of_match);
+
 static int bcm_sf2_sw_probe(struct platform_device *pdev)
 {
 	const char *reg_names[BCM_SF2_REGS_NUM] = BCM_SF2_REGS_NAME;
 	struct device_node *dn = pdev->dev.of_node;
+	const struct of_device_id *of_id = NULL;
+	const struct bcm_sf2_of_data *data;
 	struct b53_platform_data *pdata;
 	struct dsa_switch_ops *ops;
 	struct bcm_sf2_priv *priv;

@@ -1040,11 +1079,22 @@ static int bcm_sf2_sw_probe(struct platform_device *pdev)
 	if (!pdata)
 		return -ENOMEM;
 
+	of_id = of_match_node(bcm_sf2_of_match, dn);
+	if (!of_id || !of_id->data)
+		return -EINVAL;
+
+	data = of_id->data;
+
+	/* Set SWITCH_REG register offsets and SWITCH_CORE align factor */
+	priv->type = data->type;
+	priv->reg_offsets = data->reg_offsets;
+	priv->core_reg_align = data->core_reg_align;
+
 	/* Auto-detection using standard registers will not work, so
 	 * provide an indication of what kind of device we are for
 	 * b53_common to work with
 	 */
-	pdata->chip_id = BCM7445_DEVICE_ID;
+	pdata->chip_id = priv->type;
 	dev->pdata = pdata;
 
 	priv->dev = dev;

@@ -1190,11 +1240,6 @@ static int bcm_sf2_resume(struct device *dev)
 static SIMPLE_DEV_PM_OPS(bcm_sf2_pm_ops,
 			 bcm_sf2_suspend, bcm_sf2_resume);
 
-static const struct of_device_id bcm_sf2_of_match[] = {
-	{ .compatible = "brcm,bcm7445-switch-v4.0" },
-	{ /* sentinel */ },
-};
-MODULE_DEVICE_TABLE(of, bcm_sf2_of_match);
 
 static struct platform_driver bcm_sf2_driver = {
 	.probe	= bcm_sf2_sw_probe,

@@ -61,6 +61,11 @@ struct bcm_sf2_priv {
 	void __iomem			*fcb;
 	void __iomem			*acb;
 
+	/* Register offsets indirection tables */
+	u32 				type;
+	const u16			*reg_offsets;
+	unsigned int			core_reg_align;
+
 	/* spinlock protecting access to the indirect registers */
 	spinlock_t			indir_lock;
 

@@ -104,6 +109,11 @@ static inline struct bcm_sf2_priv *bcm_sf2_to_priv(struct dsa_switch *ds)
 	return dev->priv;
 }
 
+static inline u32 bcm_sf2_mangle_addr(struct bcm_sf2_priv *priv, u32 off)
+{
+	return off << priv->core_reg_align;
+}
+
 #define SF2_IO_MACRO(name) \
 static inline u32 name##_readl(struct bcm_sf2_priv *priv, u32 off)	\
 {									\

@@ -153,8 +163,28 @@ static inline void intrl2_##which##_mask_set(struct bcm_sf2_priv *priv, \
 	priv->irq##which##_mask |= (mask);				\
 }									\
 
-SF2_IO_MACRO(core);
-SF2_IO_MACRO(reg);
+static inline u32 core_readl(struct bcm_sf2_priv *priv, u32 off)
+{
+	u32 tmp = bcm_sf2_mangle_addr(priv, off);
+	return __raw_readl(priv->core + tmp);
+}
+
+static inline void core_writel(struct bcm_sf2_priv *priv, u32 val, u32 off)
+{
+	u32 tmp = bcm_sf2_mangle_addr(priv, off);
+	__raw_writel(val, priv->core + tmp);
+}
+
+static inline u32 reg_readl(struct bcm_sf2_priv *priv, u16 off)
+{
+	return __raw_readl(priv->reg + priv->reg_offsets[off]);
+}
+
+static inline void reg_writel(struct bcm_sf2_priv *priv, u32 val, u16 off)
+{
+	__raw_writel(val, priv->reg + priv->reg_offsets[off]);
+}
+
 SF2_IO64_MACRO(core);
 SF2_IO_MACRO(intrl2_0);
 SF2_IO_MACRO(intrl2_1);

@@ -12,22 +12,36 @@
 #define __BCM_SF2_REGS_H
 
 /* Register set relative to 'REG' */
-#define REG_SWITCH_CNTRL		0x00
-#define  MDIO_MASTER_SEL		(1 << 0)
 
-#define REG_SWITCH_STATUS		0x04
-#define REG_DIR_DATA_WRITE		0x08
-#define REG_DIR_DATA_READ		0x0C
+enum bcm_sf2_reg_offs {
+	REG_SWITCH_CNTRL = 0,
+	REG_SWITCH_STATUS,
+	REG_DIR_DATA_WRITE,
+	REG_DIR_DATA_READ,
+	REG_SWITCH_REVISION,
+	REG_PHY_REVISION,
+	REG_SPHY_CNTRL,
+	REG_RGMII_0_CNTRL,
+	REG_RGMII_1_CNTRL,
+	REG_RGMII_2_CNTRL,
+	REG_LED_0_CNTRL,
+	REG_LED_1_CNTRL,
+	REG_LED_2_CNTRL,
+	REG_SWITCH_REG_MAX,
+};
+
+/* Relative to REG_SWITCH_CNTRL */
+#define  MDIO_MASTER_SEL		(1 << 0)
 
-#define REG_SWITCH_REVISION		0x18
+/* Relative to REG_SWITCH_REVISION */
 #define  SF2_REV_MASK			0xffff
 #define  SWITCH_TOP_REV_SHIFT		16
 #define  SWITCH_TOP_REV_MASK		0xffff
 
-#define REG_PHY_REVISION		0x1C
+/* Relative to REG_PHY_REVISION */
 #define  PHY_REVISION_MASK		0xffff
 
-#define REG_SPHY_CNTRL			0x2C
+/* Relative to REG_SPHY_CNTRL */
 #define  IDDQ_BIAS			(1 << 0)
 #define  EXT_PWR_DOWN			(1 << 1)
 #define  FORCE_DLL_EN			(1 << 2)

@@ -37,13 +51,8 @@
 #define  PHY_PHYAD_SHIFT		8
 #define  PHY_PHYAD_MASK			0x1F
 
-#define REG_RGMII_0_BASE		0x34
-#define REG_RGMII_CNTRL			0x00
-#define REG_RGMII_IB_STATUS		0x04
-#define REG_RGMII_RX_CLOCK_DELAY_CNTRL	0x08
-#define REG_RGMII_CNTRL_SIZE		0x0C
-#define REG_RGMII_CNTRL_P(x)		(REG_RGMII_0_BASE + \
-					((x) * REG_RGMII_CNTRL_SIZE))
+#define REG_RGMII_CNTRL_P(x)		(REG_RGMII_0_CNTRL + (x))
+
 /* Relative to REG_RGMII_CNTRL */
 #define  RGMII_MODE_EN			(1 << 0)
 #define  ID_MODE_DIS			(1 << 1)

@@ -61,8 +70,8 @@
 #define  LPI_COUNT_SHIFT		9
 #define  LPI_COUNT_MASK			0x3F
 
-#define REG_LED_CNTRL_BASE		0x90
-#define REG_LED_CNTRL(x)		(REG_LED_CNTRL_BASE + (x) * 4)
+#define REG_LED_CNTRL(x)		(REG_LED_0_CNTRL + (x))
+
 #define  SPDLNK_SRC_SEL			(1 << 24)
 
 /* Register set relative to 'INTRL2_0' and 'INTRL2_1' */

@@ -2,7 +2,7 @@
 
 Required properties:
 
-- compatible: should be "brcm,bcm7445-switch-v4.0"
+- compatible: should be "brcm,bcm7445-switch-v4.0" or "brcm,bcm7278-switch-v4.0"
 - reg: addresses and length of the register sets for the device, must be 6
   pairs of register addresses and lengths
 - interrupts: interrupts for the devices, must be two interrupts

@@ -1685,6 +1685,18 @@ static const struct b53_chip_data b53_switch_chips[] = {
 		.jumbo_pm_reg = B53_JUMBO_PORT_MASK,
 		.jumbo_size_reg = B53_JUMBO_MAX_SIZE,
 	},
+	{
+		.chip_id = BCM7278_DEVICE_ID,
+		.dev_name = "BCM7278",
+		.vlans = 4096,
+		.enabled_ports = 0x1ff,
+		.arl_entries= 4,
+		.cpu_port = B53_CPU_PORT,
+		.vta_regs = B53_VTA_REGS,
+		.duplex_reg = B53_DUPLEX_STAT_GE,
+		.jumbo_pm_reg = B53_JUMBO_PORT_MASK,
+		.jumbo_size_reg = B53_JUMBO_MAX_SIZE,
+	},
 };
 
 static int b53_switch_init(struct b53_device *dev)

@@ -62,6 +62,7 @@ enum {
 	BCM53019_DEVICE_ID = 0x53019,
 	BCM58XX_DEVICE_ID = 0x5800,
 	BCM7445_DEVICE_ID = 0x7445,
+	BCM7278_DEVICE_ID = 0x7278,
 };
 
 #define B53_N_PORTS	9

@@ -179,7 +180,8 @@ static inline int is5301x(struct b53_device *dev)
 static inline int is58xx(struct b53_device *dev)
 {
 	return dev->chip_id == BCM58XX_DEVICE_ID ||
-		dev->chip_id == BCM7445_DEVICE_ID;
+		dev->chip_id == BCM7445_DEVICE_ID ||
+		dev->chip_id == BCM7278_DEVICE_ID;
 }
 
 #define B53_CPU_PORT_25	5

@@ -64,7 +64,12 @@ static void bcm_sf2_imp_vlan_setup(struct dsa_switch *ds, int cpu_port)
 static void bcm_sf2_imp_setup(struct dsa_switch *ds, int port)
 {
 	struct bcm_sf2_priv *priv = bcm_sf2_to_priv(ds);
-	u32 reg, val;
+	u32 reg, val, offset;
+
+	if (priv->type == BCM7445_DEVICE_ID)
+		offset = CORE_STS_OVERRIDE_IMP;
+	else
+		offset = CORE_STS_OVERRIDE_IMP2;
 
 	/* Enable the port memories */
 	reg = core_readl(priv, CORE_MEM_PSM_VDD_CTRL);

@@ -121,9 +126,9 @@ static void bcm_sf2_imp_setup(struct dsa_switch *ds, int port)
 	core_writel(priv, reg, CORE_BRCM_HDR_TX_DIS);
 
 	/* Force link status for IMP port */
-	reg = core_readl(priv, CORE_STS_OVERRIDE_IMP);
+	reg = core_readl(priv, offset);
 	reg |= (MII_SW_OR | LINK_STS);
-	core_writel(priv, reg, CORE_STS_OVERRIDE_IMP);
+	core_writel(priv, reg, offset);
 }
 
 static void bcm_sf2_eee_enable_set(struct dsa_switch *ds, int port, bool enable)

@@ -591,7 +596,12 @@ static void bcm_sf2_sw_adjust_link(struct dsa_switch *ds, int port,
 	struct ethtool_eee *p = &priv->port_sts[port].eee;
 	u32 id_mode_dis = 0, port_mode;
 	const char *str = NULL;
-	u32 reg;
+	u32 reg, offset;
+
+	if (priv->type == BCM7445_DEVICE_ID)
+		offset = CORE_STS_OVERRIDE_GMIIP_PORT(port);
+	else
+		offset = CORE_STS_OVERRIDE_GMIIP2_PORT(port);
 
 	switch (phydev->interface) {
 	case PHY_INTERFACE_MODE_RGMII:

@@ -662,7 +672,7 @@ static void bcm_sf2_sw_adjust_link(struct dsa_switch *ds, int port,
 	if (phydev->duplex == DUPLEX_FULL)
 		reg |= DUPLX_MODE;
 
-	core_writel(priv, reg, CORE_STS_OVERRIDE_GMIIP_PORT(port));
+	core_writel(priv, reg, offset);
 
 	if (!phydev->is_pseudo_fixed_link)
 		p->eee_enabled = bcm_sf2_eee_init(ds, port, phydev);

@@ -672,9 +682,14 @@ static void bcm_sf2_sw_fixed_link_update(struct dsa_switch *ds, int port,
 					 struct fixed_phy_status *status)
 {
 	struct bcm_sf2_priv *priv = bcm_sf2_to_priv(ds);
-	u32 duplex, pause;
+	u32 duplex, pause, offset;
 	u32 reg;
 
+	if (priv->type == BCM7445_DEVICE_ID)
+		offset = CORE_STS_OVERRIDE_GMIIP_PORT(port);
+	else
+		offset = CORE_STS_OVERRIDE_GMIIP2_PORT(port);
+
 	duplex = core_readl(priv, CORE_DUPSTS);
 	pause = core_readl(priv, CORE_PAUSESTS);
 

@@ -703,13 +718,13 @@ static void bcm_sf2_sw_fixed_link_update(struct dsa_switch *ds, int port,
 		status->duplex = !!(duplex & (1 << port));
 	}
 
-	reg = core_readl(priv, CORE_STS_OVERRIDE_GMIIP_PORT(port));
+	reg = core_readl(priv, offset);
 	reg |= SW_OVERRIDE;
 	if (status->link)
 		reg |= LINK_STS;
 	else
 		reg &= ~LINK_STS;
-	core_writel(priv, reg, CORE_STS_OVERRIDE_GMIIP_PORT(port));
+	core_writel(priv, reg, offset);
 
 	if ((pause & (1 << port)) &&
 	    (pause & (1 << (port + PAUSESTS_TX_PAUSE_SHIFT)))) {

@@ -1038,10 +1053,35 @@ static const struct bcm_sf2_of_data bcm_sf2_7445_data = {
 	.reg_offsets	= bcm_sf2_7445_reg_offsets,
 };
 
+static const u16 bcm_sf2_7278_reg_offsets[] = {
+	[REG_SWITCH_CNTRL]	= 0x00,
+	[REG_SWITCH_STATUS]	= 0x04,
+	[REG_DIR_DATA_WRITE]	= 0x08,
+	[REG_DIR_DATA_READ]	= 0x0c,
+	[REG_SWITCH_REVISION]	= 0x10,
+	[REG_PHY_REVISION]	= 0x14,
+	[REG_SPHY_CNTRL]	= 0x24,
+	[REG_RGMII_0_CNTRL]	= 0xe0,
+	[REG_RGMII_1_CNTRL]	= 0xec,
+	[REG_RGMII_2_CNTRL]	= 0xf8,
+	[REG_LED_0_CNTRL]	= 0x40,
+	[REG_LED_1_CNTRL]	= 0x4c,
+	[REG_LED_2_CNTRL]	= 0x58,
+};
+
+static const struct bcm_sf2_of_data bcm_sf2_7278_data = {
+	.type		= BCM7278_DEVICE_ID,
+	.core_reg_align	= 1,
+	.reg_offsets	= bcm_sf2_7278_reg_offsets,
+};
+
 static const struct of_device_id bcm_sf2_of_match[] = {
 	{ .compatible = "brcm,bcm7445-switch-v4.0",
 	  .data = &bcm_sf2_7445_data
 	},
+	{ .compatible = "brcm,bcm7278-switch-v4.0",
+	  .data = &bcm_sf2_7278_data
+	},
 	{ /* sentinel */ },
 };
 MODULE_DEVICE_TABLE(of, bcm_sf2_of_match);

@@ -134,6 +134,9 @@ enum bcm_sf2_reg_offs {
 #define  GMII_SPEED_UP_2G		(1 << 6)
 #define  MII_SW_OR			(1 << 7)
 
+/* Alternate layout for e.g: 7278 */
+#define CORE_STS_OVERRIDE_IMP2		0x39040
+
 #define CORE_NEW_CTRL			0x00084
 #define  IP_MC				(1 << 0)
 #define  OUTRANGEERR_DISCARD		(1 << 1)

@@ -151,6 +154,7 @@ enum bcm_sf2_reg_offs {
 #define  SW_LEARN_CNTL(x)		(1 << (x))
 
 #define CORE_STS_OVERRIDE_GMIIP_PORT(x)	(0x160 + (x) * 4)
+#define CORE_STS_OVERRIDE_GMIIP2_PORT(x) (0x39000 + (x) * 8)
 #define  LINK_STS			(1 << 0)
 #define  DUPLX_MODE			(1 << 1)
 #define  SPEED_SHIFT			2

@@ -61,34 +61,9 @@ static void bcm_sf2_imp_vlan_setup(struct dsa_switch *ds, int cpu_port)
 	}
 }
 
-static void bcm_sf2_imp_setup(struct dsa_switch *ds, int port)
+static void bcm_sf2_brcm_hdr_setup(struct bcm_sf2_priv *priv, int port)
 {
-	struct bcm_sf2_priv *priv = bcm_sf2_to_priv(ds);
-	u32 reg, val, offset;
-
-	if (priv->type == BCM7445_DEVICE_ID)
-		offset = CORE_STS_OVERRIDE_IMP;
-	else
-		offset = CORE_STS_OVERRIDE_IMP2;
-
-	/* Enable the port memories */
-	reg = core_readl(priv, CORE_MEM_PSM_VDD_CTRL);
-	reg &= ~P_TXQ_PSM_VDD(port);
-	core_writel(priv, reg, CORE_MEM_PSM_VDD_CTRL);
-
-	/* Enable Broadcast, Multicast, Unicast forwarding to IMP port */
-	reg = core_readl(priv, CORE_IMP_CTL);
-	reg |= (RX_BCST_EN | RX_MCST_EN | RX_UCST_EN);
-	reg &= ~(RX_DIS | TX_DIS);
-	core_writel(priv, reg, CORE_IMP_CTL);
-
-	/* Enable forwarding */
-	core_writel(priv, SW_FWDG_EN, CORE_SWMODE);
-
-	/* Enable IMP port in dumb mode */
-	reg = core_readl(priv, CORE_SWITCH_CTRL);
-	reg |= MII_DUMB_FWDG_EN;
-	core_writel(priv, reg, CORE_SWITCH_CTRL);
+	u32 reg, val;
 
 	/* Resolve which bit controls the Broadcom tag */
 	switch (port) {

@@ -124,6 +99,38 @@ static void bcm_sf2_imp_setup(struct dsa_switch *ds, int port)
 	reg = core_readl(priv, CORE_BRCM_HDR_TX_DIS);
 	reg &= ~(1 << port);
 	core_writel(priv, reg, CORE_BRCM_HDR_TX_DIS);
+}
+
+static void bcm_sf2_imp_setup(struct dsa_switch *ds, int port)
+{
+	struct bcm_sf2_priv *priv = bcm_sf2_to_priv(ds);
+	u32 reg, offset;
+
+	if (priv->type == BCM7445_DEVICE_ID)
+		offset = CORE_STS_OVERRIDE_IMP;
+	else
+		offset = CORE_STS_OVERRIDE_IMP2;
+
+	/* Enable the port memories */
+	reg = core_readl(priv, CORE_MEM_PSM_VDD_CTRL);
+	reg &= ~P_TXQ_PSM_VDD(port);
+	core_writel(priv, reg, CORE_MEM_PSM_VDD_CTRL);
+
+	/* Enable Broadcast, Multicast, Unicast forwarding to IMP port */
+	reg = core_readl(priv, CORE_IMP_CTL);
+	reg |= (RX_BCST_EN | RX_MCST_EN | RX_UCST_EN);
+	reg &= ~(RX_DIS | TX_DIS);
+	core_writel(priv, reg, CORE_IMP_CTL);
+
+	/* Enable forwarding */
+	core_writel(priv, SW_FWDG_EN, CORE_SWMODE);
+
+	/* Enable IMP port in dumb mode */
+	reg = core_readl(priv, CORE_SWITCH_CTRL);
+	reg |= MII_DUMB_FWDG_EN;
+	core_writel(priv, reg, CORE_SWITCH_CTRL);
+
+	bcm_sf2_brcm_hdr_setup(priv, port);
 
 	/* Force link status for IMP port */
 	reg = core_readl(priv, offset);

@@ -41,6 +41,13 @@ Optional properties:
   Admission Control Block supports reporting the number of packets in-flight in a
   switch queue
 
+Port subnodes:
+
+Optional properties:
+
+- brcm,use-bcm-hdr: boolean property, if present, indicates that the switch
+  port has Broadcom tags enabled (per-packet metadata)
+
 Example:
 
 switch_top@f0b00000 {

@@ -114,6 +121,7 @@ switch_top@f0b00000 {
 			port@0 {
 				label = "gphy";
 				reg = <0>;
+				brcm,use-bcm-hdr;
 			};
 			...
 		};

@@ -236,6 +236,10 @@ static int bcm_sf2_port_setup(struct dsa_switch *ds, int port,
 	reg &= ~P_TXQ_PSM_VDD(port);
 	core_writel(priv, reg, CORE_MEM_PSM_VDD_CTRL);
 
+	/* Enable Broadcom tags for that port if requested */
+	if (priv->brcm_tag_mask & BIT(port))
+		bcm_sf2_brcm_hdr_setup(priv, port);
+
 	/* Clear the Rx and Tx disable bits and set to no spanning tree */
 	core_writel(priv, 0, CORE_G_PCTL_PORT(port));
 

@@ -515,6 +519,9 @@ static void bcm_sf2_identify_ports(struct bcm_sf2_priv *priv,
 
 		if (mode == PHY_INTERFACE_MODE_MOCA)
 			priv->moca_port = port_num;
+
+		if (of_property_read_bool(port, "brcm,use-bcm-hdr"))
+			priv->brcm_tag_mask |= 1 << port_num;
 	}
 }
 

@@ -100,6 +100,9 @@ struct bcm_sf2_priv {
 	struct device_node		*master_mii_dn;
 	struct mii_bus			*slave_mii_bus;
 	struct mii_bus			*master_mii_bus;
+
+	/* Bitmask of ports needing BRCM tags */
+	unsigned int			brcm_tag_mask;
 };
 
 static inline struct bcm_sf2_priv *bcm_sf2_to_priv(struct dsa_switch *ds)

@@ -416,6 +416,7 @@ static int bcm7xxx_28nm_probe(struct phy_device *phydev)
 
 static struct phy_driver bcm7xxx_driver[] = {
 	BCM7XXX_28NM_GPHY(PHY_ID_BCM7250, "Broadcom BCM7250"),
+	BCM7XXX_28NM_GPHY(PHY_ID_BCM7278, "Broadcom BCM7278"),
 	BCM7XXX_28NM_GPHY(PHY_ID_BCM7364, "Broadcom BCM7364"),
 	BCM7XXX_28NM_GPHY(PHY_ID_BCM7366, "Broadcom BCM7366"),
 	BCM7XXX_28NM_GPHY(PHY_ID_BCM7439, "Broadcom BCM7439"),

@@ -430,6 +431,7 @@ static struct phy_driver bcm7xxx_driver[] = {
 
 static struct mdio_device_id __maybe_unused bcm7xxx_tbl[] = {
 	{ PHY_ID_BCM7250, 0xfffffff0, },
+	{ PHY_ID_BCM7278, 0xfffffff0, },
 	{ PHY_ID_BCM7364, 0xfffffff0, },
 	{ PHY_ID_BCM7366, 0xfffffff0, },
 	{ PHY_ID_BCM7346, 0xfffffff0, },

@@ -24,6 +24,7 @@
 #define PHY_ID_BCM57780			0x03625d90
 
 #define PHY_ID_BCM7250			0xae025280
+#define PHY_ID_BCM7278			0xae0251a0
 #define PHY_ID_BCM7364			0xae025260
 #define PHY_ID_BCM7366			0x600d8490
 #define PHY_ID_BCM7346			0x600d8650

@@ -167,6 +167,31 @@ static int bcm7xxx_28nm_e0_plus_afe_config_init(struct phy_device *phydev)
 	return 0;
 }
 
+static int bcm7xxx_28nm_a0_patch_afe_config_init(struct phy_device *phydev)
+{
+	/* +1 RC_CAL codes for RL centering for both LT and HT conditions */
+	bcm_phy_write_misc(phydev, AFE_RXCONFIG_2, 0xd003);
+
+	/* Cut master bias current by 2% to compensate for RC_CAL offset */
+	bcm_phy_write_misc(phydev, DSP_TAP10, 0x791b);
+
+	/* Improve hybrid leakage */
+	bcm_phy_write_misc(phydev, AFE_HPF_TRIM_OTHERS, 0x10e3);
+
+	/* Change rx_on_tune 8 to 0xf */
+	bcm_phy_write_misc(phydev, 0x21, 0x2, 0x87f6);
+
+	/* Change 100Tx EEE bandwidth */
+	bcm_phy_write_misc(phydev, 0x22, 0x2, 0x017d);
+
+	/* Enable ffe zero detection for Vitesse interoperability */
+	bcm_phy_write_misc(phydev, 0x26, 0x2, 0x0015);
+
+	r_rc_cal_reset(phydev);
+
+	return 0;
+}
+
 static int bcm7xxx_28nm_config_init(struct phy_device *phydev)
 {
 	u8 rev = PHY_BRCM_7XXX_REV(phydev->dev_flags);

@@ -174,6 +199,12 @@ static int bcm7xxx_28nm_config_init(struct phy_device *phydev)
 	u8 count;
 	int ret = 0;
 
+	/* Newer devices have moved the revision information back into a
+	 * standard location in MII_PHYS_ID[23]
+	 */
+	if (rev == 0)
+		rev = phydev->phy_id & ~phydev->drv->phy_id_mask;
+
 	pr_info_once("%s: %s PHY revision: 0x%02x, patch: %d\n",
 		     phydev_name(phydev), phydev->drv->name, rev, patch);
 

@@ -197,6 +228,9 @@ static int bcm7xxx_28nm_config_init(struct phy_device *phydev)
 	case 0x10:
 		ret = bcm7xxx_28nm_e0_plus_afe_config_init(phydev);
 		break;
+	case 0x01:
+		ret = bcm7xxx_28nm_a0_patch_afe_config_init(phydev);
+		break;
 	default:
 		break;
 	}