[PATCH 2/2] dwc_eth_qos: enable flow control by default

From: Niklas Cassel <redacted>

Allow autoneg to enable flow control by default.
The behavior when autoneg is off has not changed.

Signed-off-by: Niklas Cassel <redacted>
Signed-off-by: Lars Persson <redacted>
---
 drivers/net/ethernet/synopsys/dwc_eth_qos.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/drivers/net/ethernet/synopsys/dwc_eth_qos.c b/drivers/net/ethernet/synopsys/dwc_eth_qos.c
index 93a3a919f723..8e39295427c0 100644
--- a/drivers/net/ethernet/synopsys/dwc_eth_qos.c
+++ b/drivers/net/ethernet/synopsys/dwc_eth_qos.c

@@ -992,6 +992,7 @@ static int dwceqos_mii_probe(struct net_device *ndev)
 	lp->speed   = 0;
 	lp->duplex  = DUPLEX_UNKNOWN;
 	lp->phy_dev = phydev;
+	lp->flowcontrol.autoneg = AUTONEG_ENABLE;
 
 	if (netif_msg_probe(lp)) {
 		netdev_dbg(lp->ndev, "phy_addr 0x%x, phy_id 0x%08x\n",

-- 
2.1.4