[PATCH v4 1/4] soc: qcom: wcnss_ctrl: Stub wcnss_ctrl API

Subsystems: arm/qualcomm mailing list, arm/qualcomm support, the rest

STALE3691d

6 messages, 3 authors, 2016-09-07 · open the first message on its own page

[PATCH v4 1/4] soc: qcom: wcnss_ctrl: Stub wcnss_ctrl API

From: Bjorn Andersson <hidden>
Date: 2016-09-06 22:18:39

Stub the wcnss_ctrl API to allow compile testing wcnss function drivers.

Cc: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: Bjorn Andersson <redacted>
---

There are no other pending changes colliding with this, so if Andy is okay with
this it could be merged through Kalle's tree - together with the other patches.

Marcel, with this applied we can drop the depends on QCOM_SMD from the
btqcomsmd driver as well.

Changes since v3:
- Added this patch to allow compile testing without SMD support after patch 2

 include/linux/soc/qcom/wcnss_ctrl.h | 13 +++++++++++++
 1 file changed, 13 insertions(+)
diff --git a/include/linux/soc/qcom/wcnss_ctrl.h b/include/linux/soc/qcom/wcnss_ctrl.h
index a37bc5538f19..eab64976a73b 100644
--- a/include/linux/soc/qcom/wcnss_ctrl.h
+++ b/include/linux/soc/qcom/wcnss_ctrl.h
@@ -3,6 +3,19 @@
 
 #include <linux/soc/qcom/smd.h>
 
+#if IS_ENABLED(CONFIG_QCOM_WCNSS_CTRL)
+
 struct qcom_smd_channel *qcom_wcnss_open_channel(void *wcnss, const char *name, qcom_smd_cb_t cb);
 
+#else
+
+static inline struct qcom_smd_channel*
+qcom_wcnss_open_channel(void *wcnss, const char *name, qcom_smd_cb_t cb)
+{
+	WARN_ON(1);
+	return ERR_PTR(-ENXIO);
+}
+
+#endif
+
 #endif
-- 
2.5.0

[PATCH v4 3/4] wcn36xx: Implement firmware assisted scan

From: Bjorn Andersson <hidden>
Date: 2016-09-06 22:18:48

Using the software based channel scan mechanism from mac80211 keeps us
offline for 10-15 second, we should instead issue a start_scan/end_scan
on each channel reducing this time.

Signed-off-by: Bjorn Andersson <redacted>
---

Changes since v3:
- None
Changes since v2:
- Match prototype change of ieee80211_scan_completed()

 drivers/net/wireless/ath/wcn36xx/main.c    | 64 +++++++++++++++++++++++++-----
 drivers/net/wireless/ath/wcn36xx/smd.c     |  8 ++--
 drivers/net/wireless/ath/wcn36xx/smd.h     |  4 +-
 drivers/net/wireless/ath/wcn36xx/txrx.c    | 19 ++++++---
 drivers/net/wireless/ath/wcn36xx/wcn36xx.h |  9 +++++
 5 files changed, 81 insertions(+), 23 deletions(-)
diff --git a/drivers/net/wireless/ath/wcn36xx/main.c b/drivers/net/wireless/ath/wcn36xx/main.c
index 3c2522b07c90..96a9584edcbb 100644
--- a/drivers/net/wireless/ath/wcn36xx/main.c
+++ b/drivers/net/wireless/ath/wcn36xx/main.c
@@ -568,23 +568,59 @@ out:
 	return ret;
 }
 
-static void wcn36xx_sw_scan_start(struct ieee80211_hw *hw,
-				  struct ieee80211_vif *vif,
-				  const u8 *mac_addr)
+static void wcn36xx_hw_scan_worker(struct work_struct *work)
 {
-	struct wcn36xx *wcn = hw->priv;
+	struct wcn36xx *wcn = container_of(work, struct wcn36xx, scan_work);
+	struct cfg80211_scan_request *req = wcn->scan_req;
+	u8 channels[WCN36XX_HAL_PNO_MAX_NETW_CHANNELS_EX];
+	struct cfg80211_scan_info scan_info = {};
+	int i;
+
+	wcn36xx_dbg(WCN36XX_DBG_MAC, "mac80211 scan %d channels worker\n", req->n_channels);
+
+	for (i = 0; i < req->n_channels; i++)
+		channels[i] = req->channels[i]->hw_value;
+
+	wcn36xx_smd_update_scan_params(wcn, channels, req->n_channels);
 
 	wcn36xx_smd_init_scan(wcn, HAL_SYS_MODE_SCAN);
-	wcn36xx_smd_start_scan(wcn);
+	for (i = 0; i < req->n_channels; i++) {
+		wcn->scan_freq = req->channels[i]->center_freq;
+		wcn->scan_band = req->channels[i]->band;
+
+		wcn36xx_smd_start_scan(wcn, req->channels[i]->hw_value);
+		msleep(30);
+		wcn36xx_smd_end_scan(wcn, req->channels[i]->hw_value);
+
+		wcn->scan_freq = 0;
+	}
+	wcn36xx_smd_finish_scan(wcn, HAL_SYS_MODE_SCAN);
+
+	scan_info.aborted = false;
+	ieee80211_scan_completed(wcn->hw, &scan_info);
+
+	mutex_lock(&wcn->scan_lock);
+	wcn->scan_req = NULL;
+	mutex_unlock(&wcn->scan_lock);
 }
 
-static void wcn36xx_sw_scan_complete(struct ieee80211_hw *hw,
-				     struct ieee80211_vif *vif)
+static int wcn36xx_hw_scan(struct ieee80211_hw *hw,
+			   struct ieee80211_vif *vif,
+			   struct ieee80211_scan_request *hw_req)
 {
 	struct wcn36xx *wcn = hw->priv;
 
-	wcn36xx_smd_end_scan(wcn);
-	wcn36xx_smd_finish_scan(wcn, HAL_SYS_MODE_SCAN);
+	mutex_lock(&wcn->scan_lock);
+	if (wcn->scan_req) {
+		mutex_unlock(&wcn->scan_lock);
+		return -EBUSY;
+	}
+	wcn->scan_req = &hw_req->req;
+	mutex_unlock(&wcn->scan_lock);
+
+	schedule_work(&wcn->scan_work);
+
+	return 0;
 }
 
 static void wcn36xx_update_allowed_rates(struct ieee80211_sta *sta,
@@ -997,8 +1033,7 @@ static const struct ieee80211_ops wcn36xx_ops = {
 	.configure_filter       = wcn36xx_configure_filter,
 	.tx			= wcn36xx_tx,
 	.set_key		= wcn36xx_set_key,
-	.sw_scan_start		= wcn36xx_sw_scan_start,
-	.sw_scan_complete	= wcn36xx_sw_scan_complete,
+	.hw_scan		= wcn36xx_hw_scan,
 	.bss_info_changed	= wcn36xx_bss_info_changed,
 	.set_rts_threshold	= wcn36xx_set_rts_threshold,
 	.sta_add		= wcn36xx_sta_add,
@@ -1023,6 +1058,7 @@ static int wcn36xx_init_ieee80211(struct wcn36xx *wcn)
 	ieee80211_hw_set(wcn->hw, SUPPORTS_PS);
 	ieee80211_hw_set(wcn->hw, SIGNAL_DBM);
 	ieee80211_hw_set(wcn->hw, HAS_RATE_CONTROL);
+	ieee80211_hw_set(wcn->hw, SINGLE_SCAN_ON_ALL_BANDS);
 
 	wcn->hw->wiphy->interface_modes = BIT(NL80211_IFTYPE_STATION) |
 		BIT(NL80211_IFTYPE_AP) |
@@ -1032,6 +1068,9 @@ static int wcn36xx_init_ieee80211(struct wcn36xx *wcn)
 	wcn->hw->wiphy->bands[NL80211_BAND_2GHZ] = &wcn_band_2ghz;
 	wcn->hw->wiphy->bands[NL80211_BAND_5GHZ] = &wcn_band_5ghz;
 
+	wcn->hw->wiphy->max_scan_ssids = WCN36XX_MAX_SCAN_SSIDS;
+	wcn->hw->wiphy->max_scan_ie_len = WCN36XX_MAX_SCAN_IE_LEN;
+
 	wcn->hw->wiphy->cipher_suites = cipher_suites;
 	wcn->hw->wiphy->n_cipher_suites = ARRAY_SIZE(cipher_suites);
 
@@ -1152,6 +1191,9 @@ static int wcn36xx_probe(struct platform_device *pdev)
 	wcn->hw = hw;
 	wcn->dev = &pdev->dev;
 	mutex_init(&wcn->hal_mutex);
+	mutex_init(&wcn->scan_lock);
+
+	INIT_WORK(&wcn->scan_work, wcn36xx_hw_scan_worker);
 
 	wcn->smd_channel = qcom_wcnss_open_channel(wcnss, "WLAN_CTRL", wcn36xx_smd_rsp_process);
 	if (IS_ERR(wcn->smd_channel)) {
diff --git a/drivers/net/wireless/ath/wcn36xx/smd.c b/drivers/net/wireless/ath/wcn36xx/smd.c
index af0260add841..be5e5ea1e5c3 100644
--- a/drivers/net/wireless/ath/wcn36xx/smd.c
+++ b/drivers/net/wireless/ath/wcn36xx/smd.c
@@ -522,7 +522,7 @@ out:
 	return ret;
 }
 
-int wcn36xx_smd_start_scan(struct wcn36xx *wcn)
+int wcn36xx_smd_start_scan(struct wcn36xx *wcn, u8 scan_channel)
 {
 	struct wcn36xx_hal_start_scan_req_msg msg_body;
 	int ret = 0;
@@ -530,7 +530,7 @@ int wcn36xx_smd_start_scan(struct wcn36xx *wcn)
 	mutex_lock(&wcn->hal_mutex);
 	INIT_HAL_MSG(msg_body, WCN36XX_HAL_START_SCAN_REQ);
 
-	msg_body.scan_channel = WCN36XX_HW_CHANNEL(wcn);
+	msg_body.scan_channel = scan_channel;
 
 	PREPARE_HAL_BUF(wcn->hal_buf, msg_body);
 
@@ -552,7 +552,7 @@ out:
 	return ret;
 }
 
-int wcn36xx_smd_end_scan(struct wcn36xx *wcn)
+int wcn36xx_smd_end_scan(struct wcn36xx *wcn, u8 scan_channel)
 {
 	struct wcn36xx_hal_end_scan_req_msg msg_body;
 	int ret = 0;
@@ -560,7 +560,7 @@ int wcn36xx_smd_end_scan(struct wcn36xx *wcn)
 	mutex_lock(&wcn->hal_mutex);
 	INIT_HAL_MSG(msg_body, WCN36XX_HAL_END_SCAN_REQ);
 
-	msg_body.scan_channel = WCN36XX_HW_CHANNEL(wcn);
+	msg_body.scan_channel = scan_channel;
 
 	PREPARE_HAL_BUF(wcn->hal_buf, msg_body);
 
diff --git a/drivers/net/wireless/ath/wcn36xx/smd.h b/drivers/net/wireless/ath/wcn36xx/smd.h
index 40d829563c2b..8892ccd67b14 100644
--- a/drivers/net/wireless/ath/wcn36xx/smd.h
+++ b/drivers/net/wireless/ath/wcn36xx/smd.h
@@ -60,8 +60,8 @@ int wcn36xx_smd_load_nv(struct wcn36xx *wcn);
 int wcn36xx_smd_start(struct wcn36xx *wcn);
 int wcn36xx_smd_stop(struct wcn36xx *wcn);
 int wcn36xx_smd_init_scan(struct wcn36xx *wcn, enum wcn36xx_hal_sys_mode mode);
-int wcn36xx_smd_start_scan(struct wcn36xx *wcn);
-int wcn36xx_smd_end_scan(struct wcn36xx *wcn);
+int wcn36xx_smd_start_scan(struct wcn36xx *wcn, u8 scan_channel);
+int wcn36xx_smd_end_scan(struct wcn36xx *wcn, u8 scan_channel);
 int wcn36xx_smd_finish_scan(struct wcn36xx *wcn,
 			    enum wcn36xx_hal_sys_mode mode);
 int wcn36xx_smd_update_scan_params(struct wcn36xx *wcn, u8 *channels, size_t channel_count);
diff --git a/drivers/net/wireless/ath/wcn36xx/txrx.c b/drivers/net/wireless/ath/wcn36xx/txrx.c
index 1f34c2e912d7..8c387a0a3c09 100644
--- a/drivers/net/wireless/ath/wcn36xx/txrx.c
+++ b/drivers/net/wireless/ath/wcn36xx/txrx.c
@@ -45,9 +45,20 @@ int wcn36xx_rx_skb(struct wcn36xx *wcn, struct sk_buff *skb)
 	skb_put(skb, bd->pdu.mpdu_header_off + bd->pdu.mpdu_len);
 	skb_pull(skb, bd->pdu.mpdu_header_off);
 
+	hdr = (struct ieee80211_hdr *) skb->data;
+	fc = __le16_to_cpu(hdr->frame_control);
+	sn = IEEE80211_SEQ_TO_SN(__le16_to_cpu(hdr->seq_ctrl));
+
+	/* When scanning associate beacons to this */
+	if (ieee80211_is_beacon(hdr->frame_control) && wcn->scan_freq) {
+		status.freq = wcn->scan_freq;
+		status.band = wcn->scan_band;
+	} else {
+		status.freq = WCN36XX_CENTER_FREQ(wcn);
+		status.band = WCN36XX_BAND(wcn);
+	}
+
 	status.mactime = 10;
-	status.freq = WCN36XX_CENTER_FREQ(wcn);
-	status.band = WCN36XX_BAND(wcn);
 	status.signal = -get_rssi0(bd);
 	status.antenna = 1;
 	status.rate_idx = 1;
@@ -61,10 +72,6 @@ int wcn36xx_rx_skb(struct wcn36xx *wcn, struct sk_buff *skb)
 
 	memcpy(IEEE80211_SKB_RXCB(skb), &status, sizeof(status));
 
-	hdr = (struct ieee80211_hdr *) skb->data;
-	fc = __le16_to_cpu(hdr->frame_control);
-	sn = IEEE80211_SEQ_TO_SN(__le16_to_cpu(hdr->seq_ctrl));
-
 	if (ieee80211_is_beacon(hdr->frame_control)) {
 		wcn36xx_dbg(WCN36XX_DBG_BEACON, "beacon skb %p len %d fc %04x sn %d\n",
 			    skb, skb->len, fc, sn);
diff --git a/drivers/net/wireless/ath/wcn36xx/wcn36xx.h b/drivers/net/wireless/ath/wcn36xx/wcn36xx.h
index 68cc06cf9bc0..35a6590c3ee5 100644
--- a/drivers/net/wireless/ath/wcn36xx/wcn36xx.h
+++ b/drivers/net/wireless/ath/wcn36xx/wcn36xx.h
@@ -35,6 +35,9 @@
 /* How many frames until we start a-mpdu TX session */
 #define WCN36XX_AMPDU_START_THRESH	20
 
+#define WCN36XX_MAX_SCAN_SSIDS		9
+#define WCN36XX_MAX_SCAN_IE_LEN		500
+
 extern unsigned int wcn36xx_dbg_mask;
 
 enum wcn36xx_debug_mask {
@@ -212,6 +215,12 @@ struct wcn36xx {
 	spinlock_t		hal_ind_lock;
 	struct list_head	hal_ind_queue;
 
+	struct work_struct	scan_work;
+	struct cfg80211_scan_request *scan_req;
+	int			scan_freq;
+	int			scan_band;
+	struct mutex		scan_lock;
+
 	/* DXE channels */
 	struct wcn36xx_dxe_ch	dxe_tx_l_ch;	/* TX low */
 	struct wcn36xx_dxe_ch	dxe_tx_h_ch;	/* TX high */
-- 
2.5.0

[PATCH v4 4/4] wcn36xx: Implement print_reg indication

From: Bjorn Andersson <hidden>
Date: 2016-09-06 22:19:09

Some firmware versions sends a "print register indication", handle this
by printing out the content.

Cc: Nicolas Dechesne <redacted>
Signed-off-by: Bjorn Andersson <redacted>
---

Changes since v3:
- Rebased separate patch onto this series

 drivers/net/wireless/ath/wcn36xx/hal.h | 16 ++++++++++++++++
 drivers/net/wireless/ath/wcn36xx/smd.c | 30 ++++++++++++++++++++++++++++++
 2 files changed, 46 insertions(+)
diff --git a/drivers/net/wireless/ath/wcn36xx/hal.h b/drivers/net/wireless/ath/wcn36xx/hal.h
index 4f87ef1e1eb8..b765c647319d 100644
--- a/drivers/net/wireless/ath/wcn36xx/hal.h
+++ b/drivers/net/wireless/ath/wcn36xx/hal.h
@@ -350,6 +350,8 @@ enum wcn36xx_hal_host_msg_type {
 
 	WCN36XX_HAL_AVOID_FREQ_RANGE_IND = 233,
 
+	WCN36XX_HAL_PRINT_REG_INFO_IND = 259,
+
 	WCN36XX_HAL_MSG_MAX = WCN36XX_HAL_MSG_TYPE_MAX_ENUM_SIZE
 };
 
@@ -4703,4 +4705,18 @@ struct stats_class_b_ind {
 	u32 rx_time_total;
 };
 
+/* WCN36XX_HAL_PRINT_REG_INFO_IND */
+struct wcn36xx_hal_print_reg_info_ind {
+	struct wcn36xx_hal_msg_header header;
+
+	u32 count;
+	u32 scenario;
+	u32 reason;
+
+	struct {
+		u32 addr;
+		u32 value;
+	} regs[];
+} __packed;
+
 #endif /* _HAL_H_ */
diff --git a/drivers/net/wireless/ath/wcn36xx/smd.c b/drivers/net/wireless/ath/wcn36xx/smd.c
index be5e5ea1e5c3..1c2966f7db7a 100644
--- a/drivers/net/wireless/ath/wcn36xx/smd.c
+++ b/drivers/net/wireless/ath/wcn36xx/smd.c
@@ -2109,6 +2109,30 @@ static int wcn36xx_smd_delete_sta_context_ind(struct wcn36xx *wcn,
 	return -ENOENT;
 }
 
+static int wcn36xx_smd_print_reg_info_ind(struct wcn36xx *wcn,
+					  void *buf,
+					  size_t len)
+{
+	struct wcn36xx_hal_print_reg_info_ind *rsp = buf;
+	int i;
+
+	if (len < sizeof(*rsp)) {
+		wcn36xx_warn("Corrupted print reg info indication\n");
+		return -EIO;
+	}
+
+	wcn36xx_dbg(WCN36XX_DBG_HAL,
+		    "reginfo indication, scenario: 0x%x reason: 0x%x\n",
+		    rsp->scenario, rsp->reason);
+
+	for (i = 0; i < rsp->count; i++) {
+		wcn36xx_dbg(WCN36XX_DBG_HAL, "\t0x%x: 0x%x\n",
+			    rsp->regs[i].addr, rsp->regs[i].value);
+	}
+
+	return 0;
+}
+
 int wcn36xx_smd_update_cfg(struct wcn36xx *wcn, u32 cfg_id, u32 value)
 {
 	struct wcn36xx_hal_update_cfg_req_msg msg_body, *body;
@@ -2237,6 +2261,7 @@ int wcn36xx_smd_rsp_process(struct qcom_smd_channel *channel,
 	case WCN36XX_HAL_OTA_TX_COMPL_IND:
 	case WCN36XX_HAL_MISSED_BEACON_IND:
 	case WCN36XX_HAL_DELETE_STA_CONTEXT_IND:
+	case WCN36XX_HAL_PRINT_REG_INFO_IND:
 		msg_ind = kmalloc(sizeof(*msg_ind) + len, GFP_ATOMIC);
 		if (!msg_ind) {
 			wcn36xx_err("Run out of memory while handling SMD_EVENT (%d)\n",
@@ -2296,6 +2321,11 @@ static void wcn36xx_ind_smd_work(struct work_struct *work)
 						   hal_ind_msg->msg,
 						   hal_ind_msg->msg_len);
 		break;
+	case WCN36XX_HAL_PRINT_REG_INFO_IND:
+		wcn36xx_smd_print_reg_info_ind(wcn,
+					       hal_ind_msg->msg,
+					       hal_ind_msg->msg_len);
+		break;
 	default:
 		wcn36xx_err("SMD_EVENT (%d) not supported\n",
 			      msg_header->msg_type);
-- 
2.5.0

[PATCH v4 2/4] wcn36xx: Transition driver to SMD client

From: Bjorn Andersson <hidden>
Date: 2016-09-06 22:19:27

The wcn36xx wifi driver follows the life cycle of the WLAN_CTRL SMD
channel, as such it should be a SMD client. This patch makes this
transition, now that we have the necessary frameworks available.

Signed-off-by: Bjorn Andersson <redacted>
---

Changes since v3:
- Made msg_header const in wcn36xx_smd_rsp_process()

Changes since v2:
- Correct the call to the new ieee80211_scan_completed()

 drivers/net/wireless/ath/wcn36xx/dxe.c     | 16 +++---
 drivers/net/wireless/ath/wcn36xx/main.c    | 79 ++++++++++++++++++++----------
 drivers/net/wireless/ath/wcn36xx/smd.c     | 31 +++++-------
 drivers/net/wireless/ath/wcn36xx/smd.h     |  5 ++
 drivers/net/wireless/ath/wcn36xx/wcn36xx.h | 21 +++-----
 5 files changed, 86 insertions(+), 66 deletions(-)
diff --git a/drivers/net/wireless/ath/wcn36xx/dxe.c b/drivers/net/wireless/ath/wcn36xx/dxe.c
index 231fd022f0f5..87dfdaf9044c 100644
--- a/drivers/net/wireless/ath/wcn36xx/dxe.c
+++ b/drivers/net/wireless/ath/wcn36xx/dxe.c
@@ -23,6 +23,7 @@
 #define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
 
 #include <linux/interrupt.h>
+#include <linux/soc/qcom/smem_state.h>
 #include "wcn36xx.h"
 #include "txrx.h"
 
@@ -151,9 +152,12 @@ int wcn36xx_dxe_alloc_ctl_blks(struct wcn36xx *wcn)
 		goto out_err;
 
 	/* Initialize SMSM state  Clear TX Enable RING EMPTY STATE */
-	ret = wcn->ctrl_ops->smsm_change_state(
-		WCN36XX_SMSM_WLAN_TX_ENABLE,
-		WCN36XX_SMSM_WLAN_TX_RINGS_EMPTY);
+	ret = qcom_smem_state_update_bits(wcn->tx_enable_state,
+					  WCN36XX_SMSM_WLAN_TX_ENABLE |
+					  WCN36XX_SMSM_WLAN_TX_RINGS_EMPTY,
+					  WCN36XX_SMSM_WLAN_TX_RINGS_EMPTY);
+	if (ret)
+		goto out_err;
 
 	return 0;
 
@@ -678,9 +682,9 @@ int wcn36xx_dxe_tx_frame(struct wcn36xx *wcn,
 	 * notify chip about new frame through SMSM bus.
 	 */
 	if (is_low &&  vif_priv->pw_state == WCN36XX_BMPS) {
-		wcn->ctrl_ops->smsm_change_state(
-				  0,
-				  WCN36XX_SMSM_WLAN_TX_ENABLE);
+		qcom_smem_state_update_bits(wcn->tx_rings_empty_state,
+					    WCN36XX_SMSM_WLAN_TX_ENABLE,
+					    WCN36XX_SMSM_WLAN_TX_ENABLE);
 	} else {
 		/* indicate End Of Packet and generate interrupt on descriptor
 		 * done.
diff --git a/drivers/net/wireless/ath/wcn36xx/main.c b/drivers/net/wireless/ath/wcn36xx/main.c
index e1d59da2ad20..3c2522b07c90 100644
--- a/drivers/net/wireless/ath/wcn36xx/main.c
+++ b/drivers/net/wireless/ath/wcn36xx/main.c
@@ -21,6 +21,10 @@
 #include <linux/platform_device.h>
 #include <linux/of_address.h>
 #include <linux/of_device.h>
+#include <linux/of_irq.h>
+#include <linux/soc/qcom/smd.h>
+#include <linux/soc/qcom/smem_state.h>
+#include <linux/soc/qcom/wcnss_ctrl.h>
 #include "wcn36xx.h"
 
 unsigned int wcn36xx_dbg_mask;
@@ -1058,8 +1062,7 @@ static int wcn36xx_platform_get_resources(struct wcn36xx *wcn,
 	int ret;
 
 	/* Set TX IRQ */
-	res = platform_get_resource_byname(pdev, IORESOURCE_IRQ,
-					   "wcnss_wlantx_irq");
+	res = platform_get_resource_byname(pdev, IORESOURCE_IRQ, "tx");
 	if (!res) {
 		wcn36xx_err("failed to get tx_irq\n");
 		return -ENOENT;
@@ -1067,14 +1070,29 @@ static int wcn36xx_platform_get_resources(struct wcn36xx *wcn,
 	wcn->tx_irq = res->start;
 
 	/* Set RX IRQ */
-	res = platform_get_resource_byname(pdev, IORESOURCE_IRQ,
-					   "wcnss_wlanrx_irq");
+	res = platform_get_resource_byname(pdev, IORESOURCE_IRQ, "rx");
 	if (!res) {
 		wcn36xx_err("failed to get rx_irq\n");
 		return -ENOENT;
 	}
 	wcn->rx_irq = res->start;
 
+	/* Acquire SMSM tx enable handle */
+	wcn->tx_enable_state = qcom_smem_state_get(&pdev->dev,
+			"tx-enable", &wcn->tx_enable_state_bit);
+	if (IS_ERR(wcn->tx_enable_state)) {
+		wcn36xx_err("failed to get tx-enable state\n");
+		return PTR_ERR(wcn->tx_enable_state);
+	}
+
+	/* Acquire SMSM tx rings empty handle */
+	wcn->tx_rings_empty_state = qcom_smem_state_get(&pdev->dev,
+			"tx-rings-empty", &wcn->tx_rings_empty_state_bit);
+	if (IS_ERR(wcn->tx_rings_empty_state)) {
+		wcn36xx_err("failed to get tx-rings-empty state\n");
+		return PTR_ERR(wcn->tx_rings_empty_state);
+	}
+
 	mmio_node = of_parse_phandle(pdev->dev.parent->of_node, "qcom,mmio", 0);
 	if (!mmio_node) {
 		wcn36xx_err("failed to acquire qcom,mmio reference\n");
@@ -1115,11 +1133,14 @@ static int wcn36xx_probe(struct platform_device *pdev)
 {
 	struct ieee80211_hw *hw;
 	struct wcn36xx *wcn;
+	void *wcnss;
 	int ret;
-	u8 addr[ETH_ALEN];
+	const u8 *addr;
 
 	wcn36xx_dbg(WCN36XX_DBG_MAC, "platform probe\n");
 
+	wcnss = dev_get_drvdata(pdev->dev.parent);
+
 	hw = ieee80211_alloc_hw(sizeof(struct wcn36xx), &wcn36xx_ops);
 	if (!hw) {
 		wcn36xx_err("failed to alloc hw\n");
@@ -1130,11 +1151,23 @@ static int wcn36xx_probe(struct platform_device *pdev)
 	wcn = hw->priv;
 	wcn->hw = hw;
 	wcn->dev = &pdev->dev;
-	wcn->ctrl_ops = pdev->dev.platform_data;
-
 	mutex_init(&wcn->hal_mutex);
 
-	if (!wcn->ctrl_ops->get_hw_mac(addr)) {
+	wcn->smd_channel = qcom_wcnss_open_channel(wcnss, "WLAN_CTRL", wcn36xx_smd_rsp_process);
+	if (IS_ERR(wcn->smd_channel)) {
+		wcn36xx_err("failed to open WLAN_CTRL channel\n");
+		ret = PTR_ERR(wcn->smd_channel);
+		goto out_wq;
+	}
+
+	qcom_smd_set_drvdata(wcn->smd_channel, hw);
+
+	addr = of_get_property(pdev->dev.of_node, "local-mac-address", &ret);
+	if (addr && ret != ETH_ALEN) {
+		wcn36xx_err("invalid local-mac-address\n");
+		ret = -EINVAL;
+		goto out_wq;
+	} else if (addr) {
 		wcn36xx_info("mac address: %pM\n", addr);
 		SET_IEEE80211_PERM_ADDR(wcn->hw, addr);
 	}
@@ -1158,6 +1191,7 @@ out_wq:
 out_err:
 	return ret;
 }
+
 static int wcn36xx_remove(struct platform_device *pdev)
 {
 	struct ieee80211_hw *hw = platform_get_drvdata(pdev);
@@ -1168,42 +1202,33 @@ static int wcn36xx_remove(struct platform_device *pdev)
 	mutex_destroy(&wcn->hal_mutex);
 
 	ieee80211_unregister_hw(hw);
+
+	qcom_smem_state_put(wcn->tx_enable_state);
+	qcom_smem_state_put(wcn->tx_rings_empty_state);
+
 	iounmap(wcn->dxe_base);
 	iounmap(wcn->ccu_base);
 	ieee80211_free_hw(hw);
 
 	return 0;
 }
-static const struct platform_device_id wcn36xx_platform_id_table[] = {
-	{
-		.name = "wcn36xx",
-		.driver_data = 0
-	},
+
+static const struct of_device_id wcn36xx_of_match[] = {
+	{ .compatible = "qcom,wcnss-wlan" },
 	{}
 };
-MODULE_DEVICE_TABLE(platform, wcn36xx_platform_id_table);
+MODULE_DEVICE_TABLE(of, wcn36xx_of_match);
 
 static struct platform_driver wcn36xx_driver = {
 	.probe      = wcn36xx_probe,
 	.remove     = wcn36xx_remove,
 	.driver         = {
 		.name   = "wcn36xx",
+		.of_match_table = wcn36xx_of_match,
 	},
-	.id_table    = wcn36xx_platform_id_table,
 };
 
-static int __init wcn36xx_init(void)
-{
-	platform_driver_register(&wcn36xx_driver);
-	return 0;
-}
-module_init(wcn36xx_init);
-
-static void __exit wcn36xx_exit(void)
-{
-	platform_driver_unregister(&wcn36xx_driver);
-}
-module_exit(wcn36xx_exit);
+module_platform_driver(wcn36xx_driver);
 
 MODULE_LICENSE("Dual BSD/GPL");
 MODULE_AUTHOR("Eugene Krasnikov k.eugene.e-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org");
diff --git a/drivers/net/wireless/ath/wcn36xx/smd.c b/drivers/net/wireless/ath/wcn36xx/smd.c
index a443992320f2..af0260add841 100644
--- a/drivers/net/wireless/ath/wcn36xx/smd.c
+++ b/drivers/net/wireless/ath/wcn36xx/smd.c
@@ -19,6 +19,7 @@
 #include <linux/etherdevice.h>
 #include <linux/firmware.h>
 #include <linux/bitops.h>
+#include <linux/soc/qcom/smd.h>
 #include "smd.h"
 
 struct wcn36xx_cfg_val {
@@ -253,7 +254,7 @@ static int wcn36xx_smd_send_and_wait(struct wcn36xx *wcn, size_t len)
 
 	init_completion(&wcn->hal_rsp_compl);
 	start = jiffies;
-	ret = wcn->ctrl_ops->tx(wcn->hal_buf, len);
+	ret = qcom_smd_send(wcn->smd_channel, wcn->hal_buf, len);
 	if (ret) {
 		wcn36xx_err("HAL TX failed\n");
 		goto out;
@@ -2180,9 +2181,12 @@ out:
 	return ret;
 }
 
-static void wcn36xx_smd_rsp_process(struct wcn36xx *wcn, void *buf, size_t len)
+int wcn36xx_smd_rsp_process(struct qcom_smd_channel *channel,
+			    const void *buf, size_t len)
 {
-	struct wcn36xx_hal_msg_header *msg_header = buf;
+	const struct wcn36xx_hal_msg_header *msg_header = buf;
+	struct ieee80211_hw *hw = qcom_smd_get_drvdata(channel);
+	struct wcn36xx *wcn = hw->priv;
 	struct wcn36xx_hal_ind_msg *msg_ind;
 	wcn36xx_dbg_dump(WCN36XX_DBG_SMD_DUMP, "SMD <<< ", buf, len);
 
@@ -2233,15 +2237,11 @@ static void wcn36xx_smd_rsp_process(struct wcn36xx *wcn, void *buf, size_t len)
 	case WCN36XX_HAL_OTA_TX_COMPL_IND:
 	case WCN36XX_HAL_MISSED_BEACON_IND:
 	case WCN36XX_HAL_DELETE_STA_CONTEXT_IND:
-		msg_ind = kmalloc(sizeof(*msg_ind) + len, GFP_KERNEL);
+		msg_ind = kmalloc(sizeof(*msg_ind) + len, GFP_ATOMIC);
 		if (!msg_ind) {
-			/*
-			 * FIXME: Do something smarter then just
-			 * printing an error.
-			 */
 			wcn36xx_err("Run out of memory while handling SMD_EVENT (%d)\n",
 				    msg_header->msg_type);
-			break;
+			return -ENOMEM;
 		}
 
 		msg_ind->msg_len = len;
@@ -2257,6 +2257,8 @@ static void wcn36xx_smd_rsp_process(struct wcn36xx *wcn, void *buf, size_t len)
 		wcn36xx_err("SMD_EVENT (%d) not supported\n",
 			      msg_header->msg_type);
 	}
+
+	return 0;
 }
 static void wcn36xx_ind_smd_work(struct work_struct *work)
 {
@@ -2315,22 +2317,13 @@ int wcn36xx_smd_open(struct wcn36xx *wcn)
 	INIT_LIST_HEAD(&wcn->hal_ind_queue);
 	spin_lock_init(&wcn->hal_ind_lock);
 
-	ret = wcn->ctrl_ops->open(wcn, wcn36xx_smd_rsp_process);
-	if (ret) {
-		wcn36xx_err("failed to open control channel\n");
-		goto free_wq;
-	}
-
-	return ret;
+	return 0;
 
-free_wq:
-	destroy_workqueue(wcn->hal_ind_wq);
 out:
 	return ret;
 }
 
 void wcn36xx_smd_close(struct wcn36xx *wcn)
 {
-	wcn->ctrl_ops->close();
 	destroy_workqueue(wcn->hal_ind_wq);
 }
diff --git a/drivers/net/wireless/ath/wcn36xx/smd.h b/drivers/net/wireless/ath/wcn36xx/smd.h
index df80cbbd9d1b..40d829563c2b 100644
--- a/drivers/net/wireless/ath/wcn36xx/smd.h
+++ b/drivers/net/wireless/ath/wcn36xx/smd.h
@@ -51,6 +51,7 @@ struct wcn36xx_hal_ind_msg {
 };
 
 struct wcn36xx;
+struct qcom_smd_channel;
 
 int wcn36xx_smd_open(struct wcn36xx *wcn);
 void wcn36xx_smd_close(struct wcn36xx *wcn);
@@ -127,6 +128,10 @@ int wcn36xx_smd_del_ba(struct wcn36xx *wcn, u16 tid, u8 sta_index);
 int wcn36xx_smd_trigger_ba(struct wcn36xx *wcn, u8 sta_index);
 
 int wcn36xx_smd_update_cfg(struct wcn36xx *wcn, u32 cfg_id, u32 value);
+
+int wcn36xx_smd_rsp_process(struct qcom_smd_channel *channel,
+			    const void *buf, size_t len);
+
 int wcn36xx_smd_set_mc_list(struct wcn36xx *wcn,
 			    struct ieee80211_vif *vif,
 			    struct wcn36xx_hal_rcv_flt_mc_addr_list_type *fp);
diff --git a/drivers/net/wireless/ath/wcn36xx/wcn36xx.h b/drivers/net/wireless/ath/wcn36xx/wcn36xx.h
index 22242d18e1fe..68cc06cf9bc0 100644
--- a/drivers/net/wireless/ath/wcn36xx/wcn36xx.h
+++ b/drivers/net/wireless/ath/wcn36xx/wcn36xx.h
@@ -103,19 +103,6 @@ struct nv_data {
 	u8	table;
 };
 
-/* Interface for platform control path
- *
- * @open: hook must be called when wcn36xx wants to open control channel.
- * @tx: sends a buffer.
- */
-struct wcn36xx_platform_ctrl_ops {
-	int (*open)(void *drv_priv, void *rsp_cb);
-	void (*close)(void);
-	int (*tx)(char *buf, size_t len);
-	int (*get_hw_mac)(u8 *addr);
-	int (*smsm_change_state)(u32 clear_mask, u32 set_mask);
-};

Re: [PATCH v4 1/4] soc: qcom: wcnss_ctrl: Stub wcnss_ctrl API

From: Marcel Holtmann <marcel@holtmann.org>
Date: 2016-09-06 23:12:49

Hi Bjorn,
Stub the wcnss_ctrl API to allow compile testing wcnss function drivers.

Cc: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: Bjorn Andersson <redacted>
---

There are no other pending changes colliding with this, so if Andy is okay with
this it could be merged through Kalle's tree - together with the other patches.

Marcel, with this applied we can drop the depends on QCOM_SMD from the
btqcomsmd driver as well.
sounds great. As soon as this lands in net-next, then please send a patch to remove the dependency. I will pull in net-next into bluetooth-next then.

Regards

Marcel

Re: [PATCH v4 1/4] soc: qcom: wcnss_ctrl: Stub wcnss_ctrl API

From: Andy Gross <hidden>
Date: 2016-09-07 01:40:06

On Tue, Sep 06, 2016 at 03:18:29PM -0700, Bjorn Andersson wrote:
Stub the wcnss_ctrl API to allow compile testing wcnss function drivers.

Cc: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: Bjorn Andersson <redacted>
---

There are no other pending changes colliding with this, so if Andy is okay with
this it could be merged through Kalle's tree - together with the other patches.

Marcel, with this applied we can drop the depends on QCOM_SMD from the
btqcomsmd driver as well.

Changes since v3:
- Added this patch to allow compile testing without SMD support after patch 2

 include/linux/soc/qcom/wcnss_ctrl.h | 13 +++++++++++++
 1 file changed, 13 insertions(+)
This is fine.

Acked-by: Andy Gross <redacted>
Keyboard shortcuts
hback out one level
jnext message in thread
kprevious message in thread
ldrill in
Escclose help / fold thread tree
?toggle this help