[PATCH] phy: micrel: Reenable interrupts during on resume for ksz9031

Subsystems: ethernet phy library, networking drivers, the rest

STALE3681d

2 messages, 1 author, 2016-08-22 · open the first message on its own page

[PATCH] phy: micrel: Reenable interrupts during on resume for ksz9031

From: Xander Huff <hidden>
Date: 2016-08-22 21:20:39 

Like the ksz8081, the ksz9031 has the behavior where it will clear the interrupt
enable bits when leaving power down. This takes advantage of the solution
provided by f5aba91.

Signed-off-by: Xander Huff <redacted>
Signed-off-by: Nathan Sullivan <redacted>
Natinst-ReviewBoard-ID: 149877
---
 drivers/net/phy/micrel.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/net/phy/micrel.c b/drivers/net/phy/micrel.c
index 053e879..885ac9c 100644
--- a/drivers/net/phy/micrel.c
+++ b/drivers/net/phy/micrel.c
@@ -964,7 +964,7 @@ static struct phy_driver ksphy_driver[] = {
 	.get_strings	= kszphy_get_strings,
 	.get_stats	= kszphy_get_stats,
 	.suspend	= genphy_suspend,
-	.resume		= genphy_resume,
+	.resume		= kszphy_resume,
 }, {
 	.phy_id		= PHY_ID_KSZ8873MLL,
 	.phy_id_mask	= MICREL_PHY_ID_MASK,
-- 
1.9.1

Re: [PATCH] phy: micrel: Reenable interrupts during on resume for ksz9031

From: Xander Huff <hidden>
Date: 2016-08-22 22:04:01 

On 8/22/2016 3:43 PM, Xander Huff wrote:
quoted hunk
Like the ksz8081, the ksz9031 has the behavior where it will clear the interrupt
enable bits when leaving power down. This takes advantage of the solution
provided by f5aba91.

Signed-off-by: Xander Huff <redacted>
Signed-off-by: Nathan Sullivan <redacted>
Natinst-ReviewBoard-ID: 149877
---
  drivers/net/phy/micrel.c | 2 +-
  1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/net/phy/micrel.c b/drivers/net/phy/micrel.c
index 053e879..885ac9c 100644
--- a/drivers/net/phy/micrel.c
+++ b/drivers/net/phy/micrel.c
@@ -964,7 +964,7 @@ static struct phy_driver ksphy_driver[] = {
  	.get_strings	= kszphy_get_strings,
  	.get_stats	= kszphy_get_stats,
  	.suspend	= genphy_suspend,
-	.resume		= genphy_resume,
+	.resume		= kszphy_resume,
  }, {
  	.phy_id		= PHY_ID_KSZ8873MLL,
  	.phy_id_mask	= MICREL_PHY_ID_MASK,
Please disregard this patch as it was accidentally sent. Please instead refer to 
my subsequent email with the subject:
"[PATCH] phy: micrel: Reenable interrupts during resume for ksz9031"

-- 
Xander Huff
Staff Software Engineer
National Instruments
Keyboard shortcuts
hback out one level
jnext message in thread
kprevious message in thread
ldrill in
Escclose help / fold thread tree
?toggle this help