[PATCH resend] virtio-net: Remove more stack DMA

Subsystems: networking drivers, the rest, virtio net driver

STALE3672d

3 messages, 3 authors, 2016-07-20 · open the first message on its own page

[PATCH resend] virtio-net: Remove more stack DMA

From: Andy Lutomirski <luto@kernel.org>
Date: 2016-07-18 22:34:57

VLAN and MQ control was doing DMA from the stack.  Fix it.

Cc: Michael S. Tsirkin <mst@redhat.com>
Cc: "netdev@vger.kernel.org" <redacted>
Signed-off-by: Andy Lutomirski <luto@kernel.org>
---

I tested VLAN addition and removal with CONFIG_VMAP_STACK=y,
CONFIG_DEBUG_SG=y and it got rid of the warnings I saw.  I haven't
tested the MQ part because I don't know how to enable it in the first
place (I'm guessing it needs me to enable some QEMU feature I don't
know about.)

DaveM, contrary to what I thought last time I sent this, I think this
should go through net-next as long as it makes it in time for 4.8.

 drivers/net/virtio_net.c | 13 ++++++++-----
 1 file changed, 8 insertions(+), 5 deletions(-)
diff --git a/drivers/net/virtio_net.c b/drivers/net/virtio_net.c
index e0638e556fe7..5044ca37d725 100644
--- a/drivers/net/virtio_net.c
+++ b/drivers/net/virtio_net.c
@@ -144,8 +144,10 @@ struct virtnet_info {
 	/* Control VQ buffers: protected by the rtnl lock */
 	struct virtio_net_ctrl_hdr ctrl_hdr;
 	virtio_net_ctrl_ack ctrl_status;
+	struct virtio_net_ctrl_mq ctrl_mq;
 	u8 ctrl_promisc;
 	u8 ctrl_allmulti;
+	u16 ctrl_vid;
 
 	/* Ethtool settings */
 	u8 duplex;
@@ -1116,14 +1118,13 @@ static void virtnet_ack_link_announce(struct virtnet_info *vi)
 static int virtnet_set_queues(struct virtnet_info *vi, u16 queue_pairs)
 {
 	struct scatterlist sg;
-	struct virtio_net_ctrl_mq s;
 	struct net_device *dev = vi->dev;
 
 	if (!vi->has_cvq || !virtio_has_feature(vi->vdev, VIRTIO_NET_F_MQ))
 		return 0;
 
-	s.virtqueue_pairs = cpu_to_virtio16(vi->vdev, queue_pairs);
-	sg_init_one(&sg, &s, sizeof(s));
+	vi->ctrl_mq.virtqueue_pairs = cpu_to_virtio16(vi->vdev, queue_pairs);
+	sg_init_one(&sg, &vi->ctrl_mq, sizeof(vi->ctrl_mq));
 
 	if (!virtnet_send_command(vi, VIRTIO_NET_CTRL_MQ,
 				  VIRTIO_NET_CTRL_MQ_VQ_PAIRS_SET, &sg)) {
@@ -1230,7 +1231,8 @@ static int virtnet_vlan_rx_add_vid(struct net_device *dev,
 	struct virtnet_info *vi = netdev_priv(dev);
 	struct scatterlist sg;
 
-	sg_init_one(&sg, &vid, sizeof(vid));
+	vi->ctrl_vid = vid;
+	sg_init_one(&sg, &vi->ctrl_vid, sizeof(vi->ctrl_vid));
 
 	if (!virtnet_send_command(vi, VIRTIO_NET_CTRL_VLAN,
 				  VIRTIO_NET_CTRL_VLAN_ADD, &sg))
@@ -1244,7 +1246,8 @@ static int virtnet_vlan_rx_kill_vid(struct net_device *dev,
 	struct virtnet_info *vi = netdev_priv(dev);
 	struct scatterlist sg;
 
-	sg_init_one(&sg, &vid, sizeof(vid));
+	vi->ctrl_vid = vid;
+	sg_init_one(&sg, &vi->ctrl_vid, sizeof(vi->ctrl_vid));
 
 	if (!virtnet_send_command(vi, VIRTIO_NET_CTRL_VLAN,
 				  VIRTIO_NET_CTRL_VLAN_DEL, &sg))
-- 
2.7.4

Re: [PATCH resend] virtio-net: Remove more stack DMA

From: "Michael S. Tsirkin" <mst@redhat.com>
Date: 2016-07-18 23:03:28

On Mon, Jul 18, 2016 at 03:34:49PM -0700, Andy Lutomirski wrote:
VLAN and MQ control was doing DMA from the stack.  Fix it.

Cc: Michael S. Tsirkin <mst@redhat.com>
Cc: "netdev@vger.kernel.org" <redacted>
Signed-off-by: Andy Lutomirski <luto@kernel.org>
Acked-by: Michael S. Tsirkin <mst@redhat.com>

quoted hunk
---

I tested VLAN addition and removal with CONFIG_VMAP_STACK=y,
CONFIG_DEBUG_SG=y and it got rid of the warnings I saw.  I haven't
tested the MQ part because I don't know how to enable it in the first
place (I'm guessing it needs me to enable some QEMU feature I don't
know about.)

DaveM, contrary to what I thought last time I sent this, I think this
should go through net-next as long as it makes it in time for 4.8.

 drivers/net/virtio_net.c | 13 ++++++++-----
 1 file changed, 8 insertions(+), 5 deletions(-)
diff --git a/drivers/net/virtio_net.c b/drivers/net/virtio_net.c
index e0638e556fe7..5044ca37d725 100644
--- a/drivers/net/virtio_net.c
+++ b/drivers/net/virtio_net.c
@@ -144,8 +144,10 @@ struct virtnet_info {
 	/* Control VQ buffers: protected by the rtnl lock */
 	struct virtio_net_ctrl_hdr ctrl_hdr;
 	virtio_net_ctrl_ack ctrl_status;
+	struct virtio_net_ctrl_mq ctrl_mq;
 	u8 ctrl_promisc;
 	u8 ctrl_allmulti;
+	u16 ctrl_vid;
 
 	/* Ethtool settings */
 	u8 duplex;
@@ -1116,14 +1118,13 @@ static void virtnet_ack_link_announce(struct virtnet_info *vi)
 static int virtnet_set_queues(struct virtnet_info *vi, u16 queue_pairs)
 {
 	struct scatterlist sg;
-	struct virtio_net_ctrl_mq s;
 	struct net_device *dev = vi->dev;
 
 	if (!vi->has_cvq || !virtio_has_feature(vi->vdev, VIRTIO_NET_F_MQ))
 		return 0;
 
-	s.virtqueue_pairs = cpu_to_virtio16(vi->vdev, queue_pairs);
-	sg_init_one(&sg, &s, sizeof(s));
+	vi->ctrl_mq.virtqueue_pairs = cpu_to_virtio16(vi->vdev, queue_pairs);
+	sg_init_one(&sg, &vi->ctrl_mq, sizeof(vi->ctrl_mq));
 
 	if (!virtnet_send_command(vi, VIRTIO_NET_CTRL_MQ,
 				  VIRTIO_NET_CTRL_MQ_VQ_PAIRS_SET, &sg)) {
@@ -1230,7 +1231,8 @@ static int virtnet_vlan_rx_add_vid(struct net_device *dev,
 	struct virtnet_info *vi = netdev_priv(dev);
 	struct scatterlist sg;
 
-	sg_init_one(&sg, &vid, sizeof(vid));
+	vi->ctrl_vid = vid;
+	sg_init_one(&sg, &vi->ctrl_vid, sizeof(vi->ctrl_vid));
 
 	if (!virtnet_send_command(vi, VIRTIO_NET_CTRL_VLAN,
 				  VIRTIO_NET_CTRL_VLAN_ADD, &sg))
@@ -1244,7 +1246,8 @@ static int virtnet_vlan_rx_kill_vid(struct net_device *dev,
 	struct virtnet_info *vi = netdev_priv(dev);
 	struct scatterlist sg;
 
-	sg_init_one(&sg, &vid, sizeof(vid));
+	vi->ctrl_vid = vid;
+	sg_init_one(&sg, &vi->ctrl_vid, sizeof(vi->ctrl_vid));
 
 	if (!virtnet_send_command(vi, VIRTIO_NET_CTRL_VLAN,
 				  VIRTIO_NET_CTRL_VLAN_DEL, &sg))
-- 
2.7.4

Re: [PATCH resend] virtio-net: Remove more stack DMA

From: David Miller <davem@davemloft.net>
Date: 2016-07-20 02:26:09

From: Andy Lutomirski <luto@kernel.org>
Date: Mon, 18 Jul 2016 15:34:49 -0700
VLAN and MQ control was doing DMA from the stack.  Fix it.

Cc: Michael S. Tsirkin <mst@redhat.com>
Cc: "netdev@vger.kernel.org" <redacted>
Signed-off-by: Andy Lutomirski <luto@kernel.org>
---

I tested VLAN addition and removal with CONFIG_VMAP_STACK=y,
CONFIG_DEBUG_SG=y and it got rid of the warnings I saw.  I haven't
tested the MQ part because I don't know how to enable it in the first
place (I'm guessing it needs me to enable some QEMU feature I don't
know about.)

DaveM, contrary to what I thought last time I sent this, I think this
should go through net-next as long as it makes it in time for 4.8.
Applied to net-next, thanks.
Keyboard shortcuts
hback out one level
jnext message in thread
kprevious message in thread
ldrill in
Escclose help / fold thread tree
?toggle this help