[PATCH net 0/3] r8152: fix known issues

STALE3715d

5 messages, 2 authors, 2016-06-16 · open the first message on its own page

[PATCH net 0/3] r8152: fix known issues

From: Hayes Wang <hidden>
Date: 2016-06-16 02:55:43

These patches fix some known issues.

Hayes Wang (3):
  r8152: disable MAC clock speed down
  r8152: reset the bmu
  r8152: correct the rx early size

 drivers/net/usb/r8152.c | 37 ++++++++++++++++++++++++++-----------
 1 file changed, 26 insertions(+), 11 deletions(-)

-- 
2.4.11

[PATCH net 2/3] r8152: reset the bmu

From: Hayes Wang <hidden>
Date: 2016-06-16 02:56:08

Reset the BMU to clear the rx/tx fifo. This avoids that the unexpected
data remains in the hw.

Signed-off-by: Hayes Wang <redacted>
---
 drivers/net/usb/r8152.c | 19 +++++++++++++++++++
 1 file changed, 19 insertions(+)

diff --git a/drivers/net/usb/r8152.c b/drivers/net/usb/r8152.c
index 89dc752..f5bc351 100644
--- a/drivers/net/usb/r8152.c
+++ b/drivers/net/usb/r8152.c

@@ -116,6 +116,7 @@
 #define USB_TX_DMA		0xd434
 #define USB_TOLERANCE		0xd490
 #define USB_LPM_CTRL		0xd41a
+#define USB_BMU_RESET		0xd4b0
 #define USB_UPS_CTRL		0xd800
 #define USB_MISC_0		0xd81a
 #define USB_POWER_CUT		0xd80a

@@ -338,6 +339,10 @@
 #define TEST_MODE_DISABLE	0x00000001
 #define TX_SIZE_ADJUST1		0x00000100
 
+/* USB_BMU_RESET */
+#define BMU_RESET_EP_IN		0x01
+#define BMU_RESET_EP_OUT	0x02
+
 /* USB_UPS_CTRL */
 #define POWER_CUT		0x0100

@@ -2456,6 +2461,17 @@ static void r8153_teredo_off(struct r8152 *tp)
 	ocp_write_dword(tp, MCU_TYPE_PLA, PLA_TEREDO_TIMER, 0);
 }
 
+static void rtl_reset_bmu(struct r8152 *tp)
+{
+	u32 ocp_data;
+
+	ocp_data = ocp_read_byte(tp, MCU_TYPE_USB, USB_BMU_RESET);
+	ocp_data &= ~(BMU_RESET_EP_IN | BMU_RESET_EP_OUT);
+	ocp_write_byte(tp, MCU_TYPE_USB, USB_BMU_RESET, ocp_data);
+	ocp_data |= BMU_RESET_EP_IN | BMU_RESET_EP_OUT;
+	ocp_write_byte(tp, MCU_TYPE_USB, USB_BMU_RESET, ocp_data);
+}
+
 static void r8152_aldps_en(struct r8152 *tp, bool enable)
 {
 	if (enable) {

@@ -2681,6 +2697,7 @@ static void r8153_first_init(struct r8152 *tp)
 	r8153_hw_phy_cfg(tp);
 
 	rtl8152_nic_reset(tp);
+	rtl_reset_bmu(tp);
 
 	ocp_data = ocp_read_byte(tp, MCU_TYPE_PLA, PLA_OOB_CTRL);
 	ocp_data &= ~NOW_IS_OOB;

@@ -2742,6 +2759,7 @@ static void r8153_enter_oob(struct r8152 *tp)
 	ocp_write_byte(tp, MCU_TYPE_PLA, PLA_OOB_CTRL, ocp_data);
 
 	rtl_disable(tp);
+	rtl_reset_bmu(tp);
 
 	for (i = 0; i < 1000; i++) {
 		ocp_data = ocp_read_byte(tp, MCU_TYPE_PLA, PLA_OOB_CTRL);

@@ -2803,6 +2821,7 @@ static void rtl8153_disable(struct r8152 *tp)
 {
 	r8153_aldps_en(tp, false);
 	rtl_disable(tp);
+	rtl_reset_bmu(tp);
 	r8153_aldps_en(tp, true);
 	usb_enable_lpm(tp->udev);
 }

-- 
2.4.11

--
To unsubscribe from this list: send the line "unsubscribe linux-usb" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

[PATCH net 3/3] r8152: correct the rx early size

From: Hayes Wang <hidden>
Date: 2016-06-16 02:56:11

The rx early size should be

	(agg_buf_sz - packet size) / 8

Signed-off-by: Hayes Wang <redacted>
---
 drivers/net/usb/r8152.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/net/usb/r8152.c b/drivers/net/usb/r8152.c
index f5bc351..4e257b8 100644
--- a/drivers/net/usb/r8152.c
+++ b/drivers/net/usb/r8152.c

@@ -31,7 +31,7 @@
 #define NETNEXT_VERSION		"08"
 
 /* Information for net */
-#define NET_VERSION		"3"
+#define NET_VERSION		"4"
 
 #define DRIVER_VERSION		"v1." NETNEXT_VERSION "." NET_VERSION
 #define DRIVER_AUTHOR "Realtek linux nic maintainers <nic_swsd@realtek.com>"

@@ -2174,7 +2174,7 @@ static void r8153_set_rx_early_timeout(struct r8152 *tp)
 static void r8153_set_rx_early_size(struct r8152 *tp)
 {
 	u32 mtu = tp->netdev->mtu;
-	u32 ocp_data = (agg_buf_sz - mtu - VLAN_ETH_HLEN - VLAN_HLEN) / 4;
+	u32 ocp_data = (agg_buf_sz - mtu - VLAN_ETH_HLEN - VLAN_HLEN) / 8;
 
 	ocp_write_word(tp, MCU_TYPE_USB, USB_RX_EARLY_SIZE, ocp_data);
 }

-- 
2.4.11

[PATCH net 1/3] r8152: disable MAC clock speed down

From: Hayes Wang <hidden>
Date: 2016-06-16 02:56:13

Disable MAC clock speed down. It may casue the first control
transfer to contain the wrong data, when the power state change
from U1 to U0.

Signed-off-by: Hayes Wang <redacted>
---
 drivers/net/usb/r8152.c | 14 +++++---------
 1 file changed, 5 insertions(+), 9 deletions(-)

diff --git a/drivers/net/usb/r8152.c b/drivers/net/usb/r8152.c
index 3f9f6ed..89dc752 100644
--- a/drivers/net/usb/r8152.c
+++ b/drivers/net/usb/r8152.c

@@ -3382,15 +3382,11 @@ static void r8153_init(struct r8152 *tp)
 	r8153_power_cut_en(tp, false);
 	r8153_u1u2en(tp, true);
 
-	ocp_write_word(tp, MCU_TYPE_PLA, PLA_MAC_PWR_CTRL, ALDPS_SPDWN_RATIO);
-	ocp_write_word(tp, MCU_TYPE_PLA, PLA_MAC_PWR_CTRL2, EEE_SPDWN_RATIO);
-	ocp_write_word(tp, MCU_TYPE_PLA, PLA_MAC_PWR_CTRL3,
-		       PKT_AVAIL_SPDWN_EN | SUSPEND_SPDWN_EN |
-		       U1U2_SPDWN_EN | L1_SPDWN_EN);
-	ocp_write_word(tp, MCU_TYPE_PLA, PLA_MAC_PWR_CTRL4,
-		       PWRSAVE_SPDWN_EN | RXDV_SPDWN_EN | TX10MIDLE_EN |
-		       TP100_SPDWN_EN | TP500_SPDWN_EN | TP1000_SPDWN_EN |
-		       EEE_SPDWN_EN);
+	/* MAC clock speed down */
+	ocp_write_word(tp, MCU_TYPE_PLA, PLA_MAC_PWR_CTRL, 0);
+	ocp_write_word(tp, MCU_TYPE_PLA, PLA_MAC_PWR_CTRL2, 0);
+	ocp_write_word(tp, MCU_TYPE_PLA, PLA_MAC_PWR_CTRL3, 0);
+	ocp_write_word(tp, MCU_TYPE_PLA, PLA_MAC_PWR_CTRL4, 0);
 
 	r8153_enable_eee(tp);
 	r8153_aldps_en(tp, true);

-- 
2.4.11

Re: [PATCH net 0/3] r8152: fix known issues

From: David Miller <davem@davemloft.net>
Date: 2016-06-16 06:39:34

From: Hayes Wang <redacted>
Date: Thu, 16 Jun 2016 10:55:16 +0800

These patches fix some known issues.

Series applied, thanks.

`h`	back out one level
`j`	next message in thread
`k`	previous message in thread
`l`	drill in
`Esc`	close help / fold thread tree
`?`	toggle this help