[PATCH] brcmfmac: slightly simplify building interface combinations

Subsystems: broadcom brcm80211 ieee802.11 wireless drivers, the rest

STALE3692d

3 messages, 3 authors, 2016-06-29 · open the first message on its own page

[PATCH] brcmfmac: slightly simplify building interface combinations

From: Rafał Miłecki <zajec5@gmail.com>
Date: 2016-06-07 19:10:40

This change reorders some operations in brcmf_setup_ifmodes in hope to
make it simpler:
1) It allocates arrays right before filling them. This way it's easier
   to follow requested array length as it's immediately followed by
   code filling it. It's easier to check e.g. why we need 4 entries for
   P2P. Other than that it deduplicates some checks (e.g. for P2P).
2) It reorders code to first prepare limits and then define a new combo.
   Previously this was mixed (e.g. we were setting num of channels
   before preparing limits).
3) It modifies mbss code to use i variable just like other combos do.

Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
---
 .../broadcom/brcm80211/brcmfmac/cfg80211.c         | 37 ++++++++++------------
 1 file changed, 16 insertions(+), 21 deletions(-)
diff --git a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/cfg80211.c b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/cfg80211.c
index 4894eb7..33e682e 100644
--- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/cfg80211.c
+++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/cfg80211.c
@@ -6300,29 +6300,15 @@ static int brcmf_setup_ifmodes(struct wiphy *wiphy, struct brcmf_if *ifp)
 	if (!combo)
 		goto err;
 
-	c0_limits = kcalloc(p2p ? 3 : 2, sizeof(*c0_limits), GFP_KERNEL);
-	if (!c0_limits)
-		goto err;
-
-	if (p2p) {
-		p2p_limits = kcalloc(4, sizeof(*p2p_limits), GFP_KERNEL);
-		if (!p2p_limits)
-			goto err;
-	}
-
-	if (mbss) {
-		mbss_limits = kcalloc(1, sizeof(*mbss_limits), GFP_KERNEL);
-		if (!mbss_limits)
-			goto err;
-	}
-
 	wiphy->interface_modes = BIT(NL80211_IFTYPE_STATION) |
 				 BIT(NL80211_IFTYPE_ADHOC) |
 				 BIT(NL80211_IFTYPE_AP);
 
 	c = 0;
 	i = 0;
-	combo[c].num_different_channels = 1;
+	c0_limits = kcalloc(p2p ? 3 : 2, sizeof(*c0_limits), GFP_KERNEL);
+	if (!c0_limits)
+		goto err;
 	c0_limits[i].max = 1;
 	c0_limits[i++].types = BIT(NL80211_IFTYPE_STATION);
 	if (p2p) {
@@ -6340,6 +6326,7 @@ static int brcmf_setup_ifmodes(struct wiphy *wiphy, struct brcmf_if *ifp)
 		c0_limits[i].max = 1;
 		c0_limits[i++].types = BIT(NL80211_IFTYPE_AP);
 	}
+	combo[c].num_different_channels = 1;
 	combo[c].max_interfaces = i;
 	combo[c].n_limits = i;
 	combo[c].limits = c0_limits;
@@ -6347,7 +6334,9 @@ static int brcmf_setup_ifmodes(struct wiphy *wiphy, struct brcmf_if *ifp)
 	if (p2p) {
 		c++;
 		i = 0;
-		combo[c].num_different_channels = 1;
+		p2p_limits = kcalloc(4, sizeof(*p2p_limits), GFP_KERNEL);
+		if (!p2p_limits)
+			goto err;
 		p2p_limits[i].max = 1;
 		p2p_limits[i++].types = BIT(NL80211_IFTYPE_STATION);
 		p2p_limits[i].max = 1;
@@ -6356,6 +6345,7 @@ static int brcmf_setup_ifmodes(struct wiphy *wiphy, struct brcmf_if *ifp)
 		p2p_limits[i++].types = BIT(NL80211_IFTYPE_P2P_CLIENT);
 		p2p_limits[i].max = 1;
 		p2p_limits[i++].types = BIT(NL80211_IFTYPE_P2P_DEVICE);
+		combo[c].num_different_channels = 1;
 		combo[c].max_interfaces = i;
 		combo[c].n_limits = i;
 		combo[c].limits = p2p_limits;
@@ -6363,14 +6353,19 @@ static int brcmf_setup_ifmodes(struct wiphy *wiphy, struct brcmf_if *ifp)
 
 	if (mbss) {
 		c++;
+		i = 0;
+		mbss_limits = kcalloc(1, sizeof(*mbss_limits), GFP_KERNEL);
+		if (!mbss_limits)
+			goto err;
+		mbss_limits[i].max = 4;
+		mbss_limits[i++].types = BIT(NL80211_IFTYPE_AP);
 		combo[c].beacon_int_infra_match = true;
 		combo[c].num_different_channels = 1;
-		mbss_limits[0].max = 4;
-		mbss_limits[0].types = BIT(NL80211_IFTYPE_AP);
 		combo[c].max_interfaces = 4;
-		combo[c].n_limits = 1;
+		combo[c].n_limits = i;
 		combo[c].limits = mbss_limits;
 	}
+
 	wiphy->n_iface_combinations = n_combos;
 	wiphy->iface_combinations = combo;
 	return 0;
-- 
1.8.4.5

Re: [PATCH] brcmfmac: slightly simplify building interface combinations

From: Arend van Spriel <arend.vanspriel@broadcom.com>
Date: 2016-06-09 18:56:59

On 07-06-16 21:10, Rafał Miłecki wrote:
This change reorders some operations in brcmf_setup_ifmodes in hope to
make it simpler:
1) It allocates arrays right before filling them. This way it's easier
   to follow requested array length as it's immediately followed by
   code filling it. It's easier to check e.g. why we need 4 entries for
   P2P. Other than that it deduplicates some checks (e.g. for P2P).
2) It reorders code to first prepare limits and then define a new combo.
   Previously this was mixed (e.g. we were setting num of channels
   before preparing limits).
3) It modifies mbss code to use i variable just like other combos do.
Acked-by: Arend van Spriel <arend.vanspriel@broadcom.com>
quoted hunk
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
---
 .../broadcom/brcm80211/brcmfmac/cfg80211.c         | 37 ++++++++++------------
 1 file changed, 16 insertions(+), 21 deletions(-)
diff --git a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/cfg80211.c b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/cfg80211.c
index 4894eb7..33e682e 100644
--- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/cfg80211.c
+++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/cfg80211.c
@@ -6300,29 +6300,15 @@ static int brcmf_setup_ifmodes(struct wiphy *wiphy, struct brcmf_if *ifp)
 	if (!combo)
 		goto err;
 
-	c0_limits = kcalloc(p2p ? 3 : 2, sizeof(*c0_limits), GFP_KERNEL);
-	if (!c0_limits)
-		goto err;
-
-	if (p2p) {
-		p2p_limits = kcalloc(4, sizeof(*p2p_limits), GFP_KERNEL);
-		if (!p2p_limits)
-			goto err;
-	}
-
-	if (mbss) {
-		mbss_limits = kcalloc(1, sizeof(*mbss_limits), GFP_KERNEL);
-		if (!mbss_limits)
-			goto err;
-	}
-
 	wiphy->interface_modes = BIT(NL80211_IFTYPE_STATION) |
 				 BIT(NL80211_IFTYPE_ADHOC) |
 				 BIT(NL80211_IFTYPE_AP);
 
 	c = 0;
 	i = 0;
-	combo[c].num_different_channels = 1;
+	c0_limits = kcalloc(p2p ? 3 : 2, sizeof(*c0_limits), GFP_KERNEL);
+	if (!c0_limits)
+		goto err;
 	c0_limits[i].max = 1;
 	c0_limits[i++].types = BIT(NL80211_IFTYPE_STATION);
 	if (p2p) {
@@ -6340,6 +6326,7 @@ static int brcmf_setup_ifmodes(struct wiphy *wiphy, struct brcmf_if *ifp)
 		c0_limits[i].max = 1;
 		c0_limits[i++].types = BIT(NL80211_IFTYPE_AP);
 	}
+	combo[c].num_different_channels = 1;
 	combo[c].max_interfaces = i;
 	combo[c].n_limits = i;
 	combo[c].limits = c0_limits;
@@ -6347,7 +6334,9 @@ static int brcmf_setup_ifmodes(struct wiphy *wiphy, struct brcmf_if *ifp)
 	if (p2p) {
 		c++;
 		i = 0;
-		combo[c].num_different_channels = 1;
+		p2p_limits = kcalloc(4, sizeof(*p2p_limits), GFP_KERNEL);
+		if (!p2p_limits)
+			goto err;
 		p2p_limits[i].max = 1;
 		p2p_limits[i++].types = BIT(NL80211_IFTYPE_STATION);
 		p2p_limits[i].max = 1;
@@ -6356,6 +6345,7 @@ static int brcmf_setup_ifmodes(struct wiphy *wiphy, struct brcmf_if *ifp)
 		p2p_limits[i++].types = BIT(NL80211_IFTYPE_P2P_CLIENT);
 		p2p_limits[i].max = 1;
 		p2p_limits[i++].types = BIT(NL80211_IFTYPE_P2P_DEVICE);
+		combo[c].num_different_channels = 1;
 		combo[c].max_interfaces = i;
 		combo[c].n_limits = i;
 		combo[c].limits = p2p_limits;
@@ -6363,14 +6353,19 @@ static int brcmf_setup_ifmodes(struct wiphy *wiphy, struct brcmf_if *ifp)
 
 	if (mbss) {
 		c++;
+		i = 0;
+		mbss_limits = kcalloc(1, sizeof(*mbss_limits), GFP_KERNEL);
+		if (!mbss_limits)
+			goto err;
+		mbss_limits[i].max = 4;
+		mbss_limits[i++].types = BIT(NL80211_IFTYPE_AP);
 		combo[c].beacon_int_infra_match = true;
 		combo[c].num_different_channels = 1;
-		mbss_limits[0].max = 4;
-		mbss_limits[0].types = BIT(NL80211_IFTYPE_AP);
 		combo[c].max_interfaces = 4;
-		combo[c].n_limits = 1;
+		combo[c].n_limits = i;
 		combo[c].limits = mbss_limits;
 	}
+
 	wiphy->n_iface_combinations = n_combos;
 	wiphy->iface_combinations = combo;
 	return 0;

Re: brcmfmac: slightly simplify building interface combinations

From: Kalle Valo <hidden>
Date: 2016-06-29 15:42:00

Rafał Miłecki wrote:
This change reorders some operations in brcmf_setup_ifmodes in hope to
make it simpler:
1) It allocates arrays right before filling them. This way it's easier
   to follow requested array length as it's immediately followed by
   code filling it. It's easier to check e.g. why we need 4 entries for
   P2P. Other than that it deduplicates some checks (e.g. for P2P).
2) It reorders code to first prepare limits and then define a new combo.
   Previously this was mixed (e.g. we were setting num of channels
   before preparing limits).
3) It modifies mbss code to use i variable just like other combos do.

Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
Acked-by: Arend van Spriel <arend.vanspriel@broadcom.com>
Thanks, 1 patch applied to wireless-drivers-next.git:

f568adac7d1a brcmfmac: slightly simplify building interface combinations

-- 
Sent by pwcli
https://patchwork.kernel.org/patch/9162267/
Keyboard shortcuts
hback out one level
jnext message in thread
kprevious message in thread
ldrill in
Escclose help / fold thread tree
?toggle this help