[PATCH 1/3] net: mediatek: use dma_addr_t correctly

dma_alloc_coherent() expects a dma_addr_t pointer as its argument,
not an 'unsigned int', and gcc correctly warns about broken
code in the mtk_init_fq_dma function:

drivers/net/ethernet/mediatek/mtk_eth_soc.c: In function 'mtk_init_fq_dma':
drivers/net/ethernet/mediatek/mtk_eth_soc.c:463:13: error: passing argument 3 of 'dma_alloc_coherent' from incompatible pointer type [-Werror=incompatible-pointer-types]

This changes the type of the local variable to dma_addr_t.

Signed-off-by: Arnd Bergmann <redacted>
---
 drivers/net/ethernet/mediatek/mtk_eth_soc.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/net/ethernet/mediatek/mtk_eth_soc.c b/drivers/net/ethernet/mediatek/mtk_eth_soc.c
index ba3afa5d4640..3e42204adfe5 100644
--- a/drivers/net/ethernet/mediatek/mtk_eth_soc.c
+++ b/drivers/net/ethernet/mediatek/mtk_eth_soc.c

@@ -453,7 +453,7 @@ static inline void mtk_rx_get_desc(struct mtk_rx_dma *rxd,
 /* the qdma core needs scratch memory to be setup */
 static int mtk_init_fq_dma(struct mtk_eth *eth)
 {
-	unsigned int phy_ring_head, phy_ring_tail;
+	dma_addr_t phy_ring_head, phy_ring_tail;
 	int cnt = MTK_DMA_SIZE;
 	dma_addr_t dma_addr;
 	int i;

-- 
2.7.0

Device drivers should not mess with the DMA mask directly,
but instead call dma_set_mask() etc if needed.

In case of the mtk_eth_soc driver, the mask already gets set
correctly when the device is created, and setting it again
is against the documented API.

This removes the incorrect setting.

Signed-off-by: Arnd Bergmann <redacted>
---
 drivers/net/ethernet/mediatek/mtk_eth_soc.c | 3 ---
 1 file changed, 3 deletions(-)

diff --git a/drivers/net/ethernet/mediatek/mtk_eth_soc.c b/drivers/net/ethernet/mediatek/mtk_eth_soc.c
index 3e42204adfe5..87f417712da0 100644
--- a/drivers/net/ethernet/mediatek/mtk_eth_soc.c
+++ b/drivers/net/ethernet/mediatek/mtk_eth_soc.c

@@ -1676,9 +1676,6 @@ static int mtk_probe(struct platform_device *pdev)
 	struct mtk_eth *eth;
 	int err;
 
-	pdev->dev.coherent_dma_mask = DMA_BIT_MASK(32);
-	pdev->dev.dma_mask = &pdev->dev.coherent_dma_mask;
-
 	device_reset(&pdev->dev);
 
 	match = of_match_device(of_mtk_match, &pdev->dev);

-- 
2.7.0

The device_reset() function may fail, so we have to check
its return value, e.g. to make deferred probing work correctly.
gcc warns about it because of the warn_unused_result attribute:

drivers/net/ethernet/mediatek/mtk_eth_soc.c: In function 'mtk_probe':
drivers/net/ethernet/mediatek/mtk_eth_soc.c:1679:2: error: ignoring return value of 'device_reset', declared with attribute warn_unused_result [-Werror=unused-result]

This adds the trivial error check to propagate the return value
to the generic platform device probe code.

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
---
 drivers/net/ethernet/mediatek/mtk_eth_soc.c | 4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)

diff --git a/drivers/net/ethernet/mediatek/mtk_eth_soc.c b/drivers/net/ethernet/mediatek/mtk_eth_soc.c
index 87f417712da0..1e6c5498bba9 100644
--- a/drivers/net/ethernet/mediatek/mtk_eth_soc.c
+++ b/drivers/net/ethernet/mediatek/mtk_eth_soc.c

@@ -1676,7 +1676,9 @@ static int mtk_probe(struct platform_device *pdev)
 	struct mtk_eth *eth;
 	int err;
 
-	device_reset(&pdev->dev);
+	err = device_reset(&pdev->dev);
+	if (err)
+		return err;
 
 	match = of_match_device(of_mtk_match, &pdev->dev);
 	soc = (struct mtk_soc_data *)match->data;

-- 
2.7.0

From: Arnd Bergmann <arnd@arndb.de>
Date: Mon, 14 Mar 2016 15:07:10 +0100

dma_alloc_coherent() expects a dma_addr_t pointer as its argument,
not an 'unsigned int', and gcc correctly warns about broken
code in the mtk_init_fq_dma function:

drivers/net/ethernet/mediatek/mtk_eth_soc.c: In function 'mtk_init_fq_dma':
drivers/net/ethernet/mediatek/mtk_eth_soc.c:463:13: error: passing argument 3 of 'dma_alloc_coherent' from incompatible pointer type [-Werror=incompatible-pointer-types]

This changes the type of the local variable to dma_addr_t.

Signed-off-by: Arnd Bergmann <arnd@arndb.de>

Applied.

From: Arnd Bergmann <arnd@arndb.de>
Date: Mon, 14 Mar 2016 15:07:11 +0100

Device drivers should not mess with the DMA mask directly,
but instead call dma_set_mask() etc if needed.

In case of the mtk_eth_soc driver, the mask already gets set
correctly when the device is created, and setting it again
is against the documented API.

This removes the incorrect setting.

Signed-off-by: Arnd Bergmann <arnd@arndb.de>

Applied.

From: Arnd Bergmann <arnd@arndb.de>
Date: Mon, 14 Mar 2016 15:07:12 +0100

The device_reset() function may fail, so we have to check
its return value, e.g. to make deferred probing work correctly.
gcc warns about it because of the warn_unused_result attribute:

drivers/net/ethernet/mediatek/mtk_eth_soc.c: In function 'mtk_probe':
drivers/net/ethernet/mediatek/mtk_eth_soc.c:1679:2: error: ignoring return value of 'device_reset', declared with attribute warn_unused_result [-Werror=unused-result]

This adds the trivial error check to propagate the return value
to the generic platform device probe code.

Signed-off-by: Arnd Bergmann <arnd@arndb.de>

Applied.

On 14/03/2016 15:07, Arnd Bergmann wrote:

dma_alloc_coherent() expects a dma_addr_t pointer as its argument,
not an 'unsigned int', and gcc correctly warns about broken
code in the mtk_init_fq_dma function:

drivers/net/ethernet/mediatek/mtk_eth_soc.c: In function 'mtk_init_fq_dma':
drivers/net/ethernet/mediatek/mtk_eth_soc.c:463:13: error: passing argument 3 of 'dma_alloc_coherent' from incompatible pointer type [-Werror=incompatible-pointer-types]

This changes the type of the local variable to dma_addr_t.

Signed-off-by: Arnd Bergmann <arnd@arndb.de>

thanks for the fixes