# Re: \[PATCH/RFC v6 net-next\] ravb: Add dma queue interrupt support

- From: Sergei Shtylyov \<hidden\>
- Date: 2016-03-02 18:50:37 
- List: netdev
- Page: https://ratatoskr.run/netdev/2016/03/11011790
- Thread: https://ratatoskr.run/netdev/2016/02/11011342/t.md

```text
On 03/02/2016 09:16 PM, Yoshihiro Kaneko wrote:

>>> From: Kazuya Mizuguchi <redacted>
>>>
>>> This patch supports the following interrupts.
>>>
>>> - One interrupt for multiple (timestamp, error, gPTP)
>>> - One interrupt for emac
>>> - Four interrupts for dma queue (best effort rx/tx, network control rx/tx)
>>>
>>> This patch improve efficiency of the interrupt handler by adding the
>>> interrupt handler corresponding to each interrupt source described
>>> above. Additionally, it reduces the number of times of the access to
>>> EthernetAVB IF.
>>> Also this patch prevent this driver depends on the whim of a boot loader.
>>>
>>> [ykaneko0929@gmail.com: define bit names of registers]
>>> [ykaneko0929@gmail.com: add comment for gen3 only registers]
>>> [ykaneko0929@gmail.com: fix coding style]
>>> [ykaneko0929@gmail.com: update changelog]
>>> [ykaneko0929@gmail.com: gen3: fix initialization of interrupts]
>>> [ykaneko0929@gmail.com: gen3: fix clearing interrupts]
>>> [ykaneko0929@gmail.com: gen3: add helper function for request_irq()]
>>> [ykaneko0929@gmail.com: gen3: remove IRQF_SHARED flag for request_irq()]
>>> [ykaneko0929@gmail.com: revert ravb_close() and ravb_ptp_stop()]
>>> [ykaneko0929@gmail.com: avoid calling free_irq() to non-hooked interrupts]
>>> [ykaneko0929@gmail.com: make NC/BE interrupt handler a function]
>>> [ykaneko0929@gmail.com: make timestamp interrupt handler a function]
>>> [ykaneko0929@gmail.com: timestamp interrupt is handled in multiple
>>>    interrupt handler instead of dma queue interrupt handler]
>>> Signed-off-by: Kazuya Mizuguchi <redacted>
>>> Signed-off-by: Yoshihiro Kaneko <redacted>
>>
>>     OK, you are very close now! Just a few comments...
>>
[...]
>>> diff --git a/drivers/net/ethernet/renesas/ravb_main.c
>>> b/drivers/net/ethernet/renesas/ravb_main.c
>>> index c936682..22ef65d 100644
>>> --- a/drivers/net/ethernet/renesas/ravb_main.c
>>> +++ b/drivers/net/ethernet/renesas/ravb_main.c
[...]
>>>
>>> +static irqreturn_t ravb_rx_tx_interrupt(int irq, void *dev_id, int
>>> ravb_queue)
>>
>>    Please, please shorten this 'ravb_queue'...
>
> I will fix it.
>
>>     Also, would make sense to rename it to ravb_dma_interrupt()...
>
> I have renamed it from ravb_dmaq_interrupt() in this version as you
> suggested in the previous review. Did you not mean it?

   Yes, I meant that, though perhaps got somewhat muddled up. Another variant is to call the current ravb_queue_interrupt() ravb_dma_interrupt_unlocked() (after adding the register reads there) calling this one ravb_dma_interrupt() but I don't insist on the former, ravb_queue_interrupt() is good enough as is; just rename this function please.

>> [...]
>>
>>     Unfortunately, I still can't do a full gen2 regression testing as both
>> Alt and Porter boards don't work with the recent kernel due to AVB_MDIO
>> stuck at 1... But perhaps such testing isn't even necessary.
>
> Thanks,
> kaneko

MBR, Sergei
```
