From: Zhao Ya <redacted>
Date: Sat, 27 Feb 2016 10:06:44 +0800
Subject: [PATCH] IPIP tunnel performance improvement
bypass the logic of each packet's own neighbour creation when using
pointopint or loopback device.
Recently, in our tests, met a performance problem.
In a large number of packets with different target IP address through
ipip tunnel, PPS will decrease sharply.
The output of perf top are as follows, __write_lock_failed is of the first:
- 5.89% [kernel] [k] __write_lock_failed
-__write_lock_failed a
-_raw_write_lock_bh a
-__neigh_create a
-ip_finish_output a
-ip_output a
-ip_local_out a
The neighbour subsystem will create a neighbour object for each target
when using pointopint device. When massive amounts of packets with diff-
erent target IP address to be xmit through a pointopint device, these
packets will suffer the bottleneck at write_lock_bh(&tbl->lock) after
creating the neighbour object and then inserting it into a hash-table
at the same time.
This patch correct it. Only one or little amounts of neighbour objects
will be created when massive amounts of packets with different target IP
address through ipip tunnel.
As the result, performance will be improved.
Signed-off-by: Zhao Ya <redacted>
Signed-off-by: Zhaoya <redacted>
---
net/ipv4/ip_output.c | 2 ++
1 file changed, 2 insertions(+)
BTW,before the version 3.5 kernel, the source code contains the logic.
2.6.32, for example, in arp_bind_neighbour function, there are the following logic:
__be32 nexthop = ((struct rtable *) DST) - > rt_gateway;
if (dev - > flags & (IFF_LOOPBACK | IFF_POINTOPOINT))
nexthop = 0;
n = __neigh_lookup_errno (
...
zhao ya said, at 2/27/2016 12:40 PM:
quoted hunk
From: Zhao Ya <redacted>
Date: Sat, 27 Feb 2016 10:06:44 +0800
Subject: [PATCH] IPIP tunnel performance improvement
bypass the logic of each packet's own neighbour creation when using
pointopint or loopback device.
Recently, in our tests, met a performance problem.
In a large number of packets with different target IP address through
ipip tunnel, PPS will decrease sharply.
The output of perf top are as follows, __write_lock_failed is of the first:
- 5.89% [kernel] [k] __write_lock_failed
-__write_lock_failed a
-_raw_write_lock_bh a
-__neigh_create a
-ip_finish_output a
-ip_output a
-ip_local_out a
The neighbour subsystem will create a neighbour object for each target
when using pointopint device. When massive amounts of packets with diff-
erent target IP address to be xmit through a pointopint device, these
packets will suffer the bottleneck at write_lock_bh(&tbl->lock) after
creating the neighbour object and then inserting it into a hash-table
at the same time.
This patch correct it. Only one or little amounts of neighbour objects
will be created when massive amounts of packets with different target IP
address through ipip tunnel.
As the result, performance will be improved.
Signed-off-by: Zhao Ya <redacted>
Signed-off-by: Zhaoya <redacted>
---
net/ipv4/ip_output.c | 2 ++
1 file changed, 2 insertions(+)
From: Cong Wang <hidden> Date: 2016-02-27 06:29:53
On Fri, Feb 26, 2016 at 8:40 PM, zhao ya [off-list ref] wrote:
From: Zhao Ya <redacted>
Date: Sat, 27 Feb 2016 10:06:44 +0800
Subject: [PATCH] IPIP tunnel performance improvement
bypass the logic of each packet's own neighbour creation when using
pointopint or loopback device.
Recently, in our tests, met a performance problem.
In a large number of packets with different target IP address through
ipip tunnel, PPS will decrease sharply.
The output of perf top are as follows, __write_lock_failed is of the first:
- 5.89% [kernel] [k] __write_lock_failed
-__write_lock_failed a
-_raw_write_lock_bh a
-__neigh_create a
-ip_finish_output a
-ip_output a
-ip_local_out a
The neighbour subsystem will create a neighbour object for each target
when using pointopint device. When massive amounts of packets with diff-
erent target IP address to be xmit through a pointopint device, these
packets will suffer the bottleneck at write_lock_bh(&tbl->lock) after
creating the neighbour object and then inserting it into a hash-table
at the same time.
This patch correct it. Only one or little amounts of neighbour objects
will be created when massive amounts of packets with different target IP
address through ipip tunnel.
As the result, performance will be improved.
Well, you just basically revert another bug fix:
commit 0bb4087cbec0ef74fd416789d6aad67957063057
Author: David S. Miller [off-list ref]
Date: Fri Jul 20 16:00:53 2012 -0700
ipv4: Fix neigh lookup keying over loopback/point-to-point devices.
We were using a special key "0" for all loopback and point-to-point
device neigh lookups under ipv4, but we wouldn't use that special
key for the neigh creation.
So basically we'd make a new neigh at each and every lookup :-)
This special case to use only one neigh for these device types
is of dubious value, so just remove it entirely.
Reported-by: Eric Dumazet [off-list ref]
Signed-off-by: David S. Miller [off-list ref]
which would bring the neigh entries counting problem back...
Did you try to tune the neigh gc parameters for your case?
Thanks.
Yes, I did, but have no effect.
I want to ask is, why David's patch not used.
Thanks.
Cong Wang said, at 2/27/2016 2:29 PM:
On Fri, Feb 26, 2016 at 8:40 PM, zhao ya [off-list ref] wrote:
quoted
From: Zhao Ya <redacted>
Date: Sat, 27 Feb 2016 10:06:44 +0800
Subject: [PATCH] IPIP tunnel performance improvement
bypass the logic of each packet's own neighbour creation when using
pointopint or loopback device.
Recently, in our tests, met a performance problem.
In a large number of packets with different target IP address through
ipip tunnel, PPS will decrease sharply.
The output of perf top are as follows, __write_lock_failed is of the first:
- 5.89% [kernel] [k] __write_lock_failed
-__write_lock_failed a
-_raw_write_lock_bh a
-__neigh_create a
-ip_finish_output a
-ip_output a
-ip_local_out a
The neighbour subsystem will create a neighbour object for each target
when using pointopint device. When massive amounts of packets with diff-
erent target IP address to be xmit through a pointopint device, these
packets will suffer the bottleneck at write_lock_bh(&tbl->lock) after
creating the neighbour object and then inserting it into a hash-table
at the same time.
This patch correct it. Only one or little amounts of neighbour objects
will be created when massive amounts of packets with different target IP
address through ipip tunnel.
As the result, performance will be improved.
Well, you just basically revert another bug fix:
commit 0bb4087cbec0ef74fd416789d6aad67957063057
Author: David S. Miller [off-list ref]
Date: Fri Jul 20 16:00:53 2012 -0700
ipv4: Fix neigh lookup keying over loopback/point-to-point devices.
We were using a special key "0" for all loopback and point-to-point
device neigh lookups under ipv4, but we wouldn't use that special
key for the neigh creation.
So basically we'd make a new neigh at each and every lookup :-)
This special case to use only one neigh for these device types
is of dubious value, so just remove it entirely.
Reported-by: Eric Dumazet [off-list ref]
Signed-off-by: David S. Miller [off-list ref]
which would bring the neigh entries counting problem back...
Did you try to tune the neigh gc parameters for your case?
Thanks.