Re: [PATCH] net: smc911x: convert pxa dma to dmaengine

Hitoshi Mitake [off-list ref] writes:

Hi Robert,

On Sat, Feb 6, 2016 at 6:05 PM, Robert Jarzmik [off-list ref] wrote:
    > Please just keep pinging people to properly test this.
    
    Okay, let's have another try.
    
    Hi Guennadi, Hitoshi, Fabio,
    
    Could any of you try this patch to ensure your board is not broken please ?
    I've re-added the patch at the end of this mail for easier handling.
    Normally no
    code path in non-PXA board is changed, so the test should be
    straightforward.
    
    It's also available in : https://lkml.org/lkml/2015/11/30/768
    
    You're the maintainers of the following boards using smc911x AFAIK:
    - sh2007: Guennadi and Hitoshi

Really sorry, currently I don't have the board :(
Do you have a working board that can be used for testing, Guennadi?

Thanks,
Hitoshi

Hello,

I'll reping once more, to see if any of you could give this patch a try.
So far Hitoshi doesn't have the hardware anymore, so it leaves only Guennadi and
Fabio.

If you could give it a try it would be great.

For reference, the patch is here : https://lkml.org/lkml/2015/11/30/768

Cheers.

On Sat, Feb 20, 2016 at 12:48 PM, Robert Jarzmik [off-list ref] wrote:

Hello,

I'll reping once more, to see if any of you could give this patch a try.
So far Hitoshi doesn't have the hardware anymore, so it leaves only Guennadi and
Fabio.

If you could give it a try it would be great.

For reference, the patch is here : https://lkml.org/lkml/2015/11/30/768

I finally got access to a mx53ard board, applied your patch and
managed to NFS boot without issues:

[    1.739281] smsc911x f4000000.lan9220 eth0: SMSC911x/921x
identified at 0xe0a80000, IRQ: 207

Tested-by: Fabio Estevam <redacted>