# Re: \[PATCH/RFC v4 net-next\] ravb: Add dma queue interrupt support

- From: Sergei Shtylyov \<hidden\>
- Date: 2016-02-21 15:42:41 
- List: netdev
- Page: https://ratatoskr.run/netdev/2016/02/11010511
- Thread: https://ratatoskr.run/netdev/2016/01/11007903/t.md

```text
Hello.

   Sorry for the late reply -- I was hoping to get AVB working on another gen2 board...

On 02/08/2016 08:19 PM, Yoshihiro Kaneko wrote:

[...]
>>>>> From: Kazuya Mizuguchi <redacted>
>>>>>
>>>>> This patch supports the following interrupts.
>>>>>
>>>>> - One interrupt for multiple (descriptor, error, management)
>>>>> - One interrupt for emac
>>>>> - Four interrupts for dma queue (best effort rx/tx, network control
>>>>> rx/tx)
>>>>>
>>>>> This patch improve efficiency of the interrupt handler by adding the
>>>>> interrupt handler corresponding to each interrupt source described
>>>>> above. Additionally, it reduces the number of times of the access to
>>>>> EthernetAVB IF.
>>>>>
>>>>> Signed-off-by: Kazuya Mizuguchi <redacted>
>>>>> Signed-off-by: Yoshihiro Kaneko <redacted>

[...]

>>>>> diff --git a/drivers/net/ethernet/renesas/ravb_main.c
>>>>> b/drivers/net/ethernet/renesas/ravb_main.c
>>>>> index ac43ed9..076f25f 100644
>>>>> --- a/drivers/net/ethernet/renesas/ravb_main.c
>>>>> +++ b/drivers/net/ethernet/renesas/ravb_main.c
[...]
>>>>> +
>>>>> +       spin_lock(&priv->lock);
>>>>> +
>>>>> +       ris0 = ravb_read(ndev, RIS0);
>>>>> +       ric0 = ravb_read(ndev, RIC0);
>>>>> +       tis  = ravb_read(ndev, TIS);
>>>>> +       tic  = ravb_read(ndev, TIC);
>>>>> +
>>>>> +       /* Timestamp updated */
>>>>> +       if (tis & TIS_TFUF) {
>>>>> +               ravb_write(ndev, TID_TFUD, TID);
>>>>
>>>>      Wait, you're supposed to clear the TFUF interrupt, not to disable!
>>>
>>> Thanks for finding this bug.
>>>
>>>> And with that fixed, this interrupt's handler could get factored out into
>>>> a
>>>> function...
>>>
>>> Is this not too small to make a function?
>>
>>     I wouldn't say so. But need to count the summary LoCs, of course...
>> perhaps indeed not worth it...
>
> I don't feel need for making it a function.
> It only clears the interrupt and calls ravb_get_tx_tstamp().

   I meant that the enclosing *if* statement should be a part of function too...

[...]

>>>>> +                          struct net_device *ndev, struct device *dev,
>>>>> +                          const char *ch)
>>>>> +{
>>>>> +       char *name;
>>>>> +       int error;
>>>>> +
>>>>> +       name = devm_kasprintf(dev, GFP_KERNEL, "%s:%s", ndev->name, ch);
>>>>> +       error = request_irq(irq, handler, IRQF_SHARED, name, ndev);
>>>>
>>>>      Not sure if we need IRQF_SHARED on those IRQs, they're not really
>>>> shareable...
>>>
>>> I don't know whether this causes something bad.
>>> I think this controller is supporting a shared IRQ.
>>
>>     Based on the high-level trigger, I'd rather suspect not. Anyway, all the
>> SoC IRQs are dedicated to a certain (single) source.
>
> I don't want to change that if there is no fatal issue in the use of
> IRQF_SHARED.
> However, I will remove the flag if it is simple waste...

   It's not a waste but it just shouldn't be needed.

[...]

>>>>      OK, I'll now proceed to sanity-testing this patch on the gen2
>>>> hardware.
>>
>>     I'm afraid this will have to wait until I have a gen2 board with fully
>> working AVB... :-(
>
> Does it take long time?

   Unfortunately. :-(
   I wasn't able to get the AVB driver to work on the modified Porter board and now I've ascertained that it doesn't work on the re-jumpred Alt board too, seemingly for the same reason -- the AVB_MDIO pin gets stuck at 1 during the MDIO bus scan, so the device opening fails due to the driver not able to connect to PHY. LTSI 3.10 based kernels do work, however...

> Thanks,
> kaneko

MBR, Sergei
```
