# Re: \[PATCH/RFC v4 net-next\] ravb: Add dma queue interrupt support

- From: Yoshihiro Kaneko \<hidden\>
- Date: 2016-02-07 17:18:10 
- List: netdev
- Page: https://ratatoskr.run/netdev/2016/02/11009069
- Thread: https://ratatoskr.run/netdev/2016/01/11007903/t.md

```text
2016-01-29 2:51 GMT+09:00 Sergei Shtylyov [ref]:
> On 01/24/2016 06:52 PM, Yoshihiro Kaneko wrote:
>
>> From: Kazuya Mizuguchi <redacted>
>>
>> This patch supports the following interrupts.
>>
>> - One interrupt for multiple (descriptor, error, management)
>
>
>    Looking at the code again, ravb_multi_interrupot() only handles error and
> gPTP interrupt now.

Indeed, it is.

>
>> - One interrupt for emac
>> - Four interrupts for dma queue (best effort rx/tx, network control rx/tx)
>>
>> This patch improve efficiency of the interrupt handler by adding the
>> interrupt handler corresponding to each interrupt source described
>> above. Additionally, it reduces the number of times of the access to
>> EthernetAVB IF.
>
>
>    I'd still like to see there a statement about not being dependent on the
> whim of a boot loader any more...

I agreed.

>
>>
>> Signed-off-by: Kazuya Mizuguchi <redacted>
>> Signed-off-by: Yoshihiro Kaneko <redacted>
>
>
> [...]
>
> MBR, Sergei
>

Thanks,
kaneko
```
