[PATCH net] net: dsa: mv88e6xxx: fix port VLAN maps

Currently the port based VLAN maps should be configured to allow every
port to egress frames on all other ports, except themselves.

The debugfs interface shows that they are misconfigured. For instance, a
7-port switch has the following content in the related register 0x06:

       GLOBAL GLOBAL2 SERDES   0    1    2    3    4    5    6
    ...
    6:  1fa4    1f0f       4   7f   7e   7d   7c   7b   7a   79
    ...

This means that port 3 is allowed to talk to port 2-6, but cannot talk
to ports 0 and 1. With this fix, port 3 can correctly talk to all ports
except 3 itself:

       GLOBAL GLOBAL2 SERDES   0    1    2    3    4    5    6
    ...
    6:  1fa4    1f0f       4   7e   7d   7b   77   6f   5f   3f
    ...

Fixes: ede8098d0fef ("net: dsa: mv88e6xxx: bridges do not need an FID")
Reported-by: Kevin Smith <redacted>
Signed-off-by: Vivien Didelot <redacted>
---
 drivers/net/dsa/mv88e6xxx.c | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

diff --git a/drivers/net/dsa/mv88e6xxx.c b/drivers/net/dsa/mv88e6xxx.c
index b03f746..d365007 100644
--- a/drivers/net/dsa/mv88e6xxx.c
+++ b/drivers/net/dsa/mv88e6xxx.c

@@ -2153,7 +2153,8 @@ static int mv88e6xxx_setup_port(struct dsa_switch *ds, int port)
 	 * database, and allow every port to egress frames on all other ports.
 	 */
 	reg = BIT(ps->num_ports) - 1; /* all ports */
-	ret = _mv88e6xxx_port_vlan_map_set(ds, port, reg & ~port);
+	reg &= ~BIT(port); /* except itself */
+	ret = _mv88e6xxx_port_vlan_map_set(ds, port, reg);
 	if (ret)
 		goto abort;
 

-- 
2.7.0

On Thu, Jan 28, 2016 at 04:54:37PM -0500, Vivien Didelot wrote:

Currently the port based VLAN maps should be configured to allow every
port to egress frames on all other ports, except themselves.

The debugfs interface shows that they are misconfigured. For instance, a
7-port switch has the following content in the related register 0x06:

       GLOBAL GLOBAL2 SERDES   0    1    2    3    4    5    6
    ...
    6:  1fa4    1f0f       4   7f   7e   7d   7c   7b   7a   79
    ...

This means that port 3 is allowed to talk to port 2-6, but cannot talk
to ports 0 and 1. With this fix, port 3 can correctly talk to all ports
except 3 itself:

       GLOBAL GLOBAL2 SERDES   0    1    2    3    4    5    6
    ...
    6:  1fa4    1f0f       4   7e   7d   7b   77   6f   5f   3f
    ...

Fixes: ede8098d0fef ("net: dsa: mv88e6xxx: bridges do not need an FID")
Reported-by: Kevin Smith <redacted>
Signed-off-by: Vivien Didelot <redacted>

Reviewed-by: Andrew Lunn <andrew@lunn.ch>

Thanks
	Andrew

On 01/28/2016 08:18 PM, Andrew Lunn wrote:

On Thu, Jan 28, 2016 at 04:54:37PM -0500, Vivien Didelot wrote:

quoted

Currently the port based VLAN maps should be configured to allow every
port to egress frames on all other ports, except themselves.

The debugfs interface shows that they are misconfigured. For instance, a
7-port switch has the following content in the related register 0x06:

        GLOBAL GLOBAL2 SERDES   0    1    2    3    4    5    6
     ...
     6:  1fa4    1f0f       4   7f   7e   7d   7c   7b   7a   79
     ...

This means that port 3 is allowed to talk to port 2-6, but cannot talk
to ports 0 and 1. With this fix, port 3 can correctly talk to all ports
except 3 itself:

        GLOBAL GLOBAL2 SERDES   0    1    2    3    4    5    6
     ...
     6:  1fa4    1f0f       4   7e   7d   7b   77   6f   5f   3f
     ...

Fixes: ede8098d0fef ("net: dsa: mv88e6xxx: bridges do not need an FID")
Reported-by: Kevin Smith <redacted>
Signed-off-by: Vivien Didelot <redacted>

Reviewed-by: Andrew Lunn <andrew@lunn.ch>

Tested-by: Kevin Smith <redacted>

From: Vivien Didelot <redacted>
Date: Thu, 28 Jan 2016 16:54:37 -0500

Currently the port based VLAN maps should be configured to allow every
port to egress frames on all other ports, except themselves.

The debugfs interface shows that they are misconfigured. For instance, a
7-port switch has the following content in the related register 0x06:

       GLOBAL GLOBAL2 SERDES   0    1    2    3    4    5    6
    ...
    6:  1fa4    1f0f       4   7f   7e   7d   7c   7b   7a   79
    ...

This means that port 3 is allowed to talk to port 2-6, but cannot talk
to ports 0 and 1. With this fix, port 3 can correctly talk to all ports
except 3 itself:

       GLOBAL GLOBAL2 SERDES   0    1    2    3    4    5    6
    ...
    6:  1fa4    1f0f       4   7e   7d   7b   77   6f   5f   3f
    ...

Fixes: ede8098d0fef ("net: dsa: mv88e6xxx: bridges do not need an FID")
Reported-by: Kevin Smith <redacted>
Signed-off-by: Vivien Didelot <redacted>

Applied.