# Re: bonding (IEEE 802.3ad) not working with qemu/virtio

- From: Jay Vosburgh \<hidden\>
- Date: 2016-01-29 21:45:05 
- List: netdev
- Page: https://ratatoskr.run/netdev/2016/01/11008231
- Thread: https://ratatoskr.run/netdev/2016/01/11007938/t.md

```text
Nikolay Aleksandrov [ref] wrote:

>On 01/25/2016 05:24 PM, Bjørnar Ness wrote:
>> As subject says, 802.3ad bonding is not working with virtio network model.
>> 
>> The only errors I see is:
>> 
>> No 802.3ad response from the link partner for any adapters in the bond.
>> 
>> Dumping the network traffic shows that no LACP packets are sent from the
>> host running with virtio driver, changing to for example e1000 solves
>> this problem
>> with no configuration changes.
>> 
>> Is this a known problem?
>> 
>[Including bonding maintainers for comments]
>
>Hi,
>Here's a workaround patch for virtio_net devices that "cheats" the
>duplex test (which is the actual problem). I've tested this locally
>and it works for me.
>I'd let the others comment on the implementation, there're other signs
>that can be used to distinguish a virtio_net device so I'm open to suggestions.
>Also feedback if this is at all acceptable would be appreciated.

	Should virtio instead provide an arbitrary speed and full duplex
to ethtool, as veth does?

	Creating a magic whitelist of devices deep inside the 802.3ad
implementation seems less desirable.

	-J
	
---
	-Jay Vosburgh, jay.vosburgh@canonical.com
```
