# Re: \[PATCH/RFC v4 net-next\] ravb: Add dma queue interrupt support

- From: Sergei Shtylyov \<hidden\>
- Date: 2016-01-28 18:36:02 
- List: netdev
- Page: https://ratatoskr.run/netdev/2016/01/11008140
- Thread: https://ratatoskr.run/netdev/2016/01/11007903/t.md

```text
On 01/28/2016 06:50 PM, Sergei Shtylyov wrote:

>>>>> From: Kazuya Mizuguchi <redacted>
>
>     Kaneko-san, with the amount of the review changes, it might make sense for
> you to assume the authorship of this patch, only noting it's based on
> Mizuguchi-san's work. In principle, when you change the original patch, you
> should document the changes you made in the change log, above ---...
>
>>>>> This patch supports the following interrupts.
>>>>>
>>>>> - One interrupt for multiple (descriptor, error, management)
>>>>> - One interrupt for emac
>>>>> - Four interrupts for dma queue (best effort rx/tx, network control rx/tx)
>>>>>
>>>>> This patch improve efficiency of the interrupt handler by adding the
>>>>> interrupt handler corresponding to each interrupt source described
>>>>> above. Additionally, it reduces the number of times of the access to
>>>>> EthernetAVB IF.
>>>>>
>>>>> Signed-off-by: Kazuya Mizuguchi <redacted>
>>>>> Signed-off-by: Yoshihiro Kaneko <redacted>
>>>>
>>>> I have tested this patch and the result seems positive.
>>>
>>>     Tested on gen3 only I guess?
>>
>> Yes, that is correct.
>>
>>>> Please let me know if any more/different testing would help.
>>>
>>>     Sanity testing on some gen2 SoC wouldn't hurt (if you have time).
>>
>> I don't believe that I have access to a gen2 board (+ extra hardware ?)
>> where ravb works.
>
>     Sorry, I just forgot about that.
>
>> If you do would it be possible for you to do a sanity test?
>
>     Yes, of course.

   Oops, I forgot that I failed to make the driver work on Porter -- it fails to connect to PHY while opening eth<n>. I've tested the patch as far as I could and it didn't blow up. :-)
   I'll have access to the other board (most probably Alt) next week.

MBR, Sergei

```
