# Re: \[PATCH/RFC v4 net-next\] ravb: Add dma queue interrupt support

- From: Sergei Shtylyov \<hidden\>
- Date: 2016-01-28 17:51:39 
- List: netdev
- Page: https://ratatoskr.run/netdev/2016/01/11008138
- Thread: https://ratatoskr.run/netdev/2016/01/11007903/t.md

```text
On 01/24/2016 06:52 PM, Yoshihiro Kaneko wrote:

> From: Kazuya Mizuguchi <redacted>
>
> This patch supports the following interrupts.
>
> - One interrupt for multiple (descriptor, error, management)

   Looking at the code again, ravb_multi_interrupot() only handles error and gPTP interrupt now.

> - One interrupt for emac
> - Four interrupts for dma queue (best effort rx/tx, network control rx/tx)
>
> This patch improve efficiency of the interrupt handler by adding the
> interrupt handler corresponding to each interrupt source described
> above. Additionally, it reduces the number of times of the access to
> EthernetAVB IF.

   I'd still like to see there a statement about not being dependent on the whim of a boot loader any more...

>
> Signed-off-by: Kazuya Mizuguchi <redacted>
> Signed-off-by: Yoshihiro Kaneko <redacted>

[...]

MBR, Sergei

```
