# Re: \[PATCH/RFC v4 net-next\] ravb: Add dma queue interrupt support

- From: Sergei Shtylyov \<hidden\>
- Date: 2016-01-28 15:50:33 
- List: netdev
- Page: https://ratatoskr.run/netdev/2016/01/11008125
- Thread: https://ratatoskr.run/netdev/2016/01/11007903/t.md

```text
Hello.

On 01/27/2016 04:49 AM, Simon Horman wrote:

>>>> From: Kazuya Mizuguchi <redacted>

   Kaneko-san, with the amount of the review changes, it might make sense for you to assume the authorship of this patch, only noting it's based on Mizuguchi-san's work. In principle, when you change the original patch, you should document the changes you made in the change log, above ---...

>>>> This patch supports the following interrupts.
>>>>
>>>> - One interrupt for multiple (descriptor, error, management)
>>>> - One interrupt for emac
>>>> - Four interrupts for dma queue (best effort rx/tx, network control rx/tx)
>>>>
>>>> This patch improve efficiency of the interrupt handler by adding the
>>>> interrupt handler corresponding to each interrupt source described
>>>> above. Additionally, it reduces the number of times of the access to
>>>> EthernetAVB IF.
>>>>
>>>> Signed-off-by: Kazuya Mizuguchi <redacted>
>>>> Signed-off-by: Yoshihiro Kaneko <redacted>
>>>
>>> I have tested this patch and the result seems positive.
>>
>>     Tested on gen3 only I guess?
>
> Yes, that is correct.
>
>>> Please let me know if any more/different testing would help.
>>
>>     Sanity testing on some gen2 SoC wouldn't hurt (if you have time).
>
> I don't believe that I have access to a gen2 board (+ extra hardware ?)
> where ravb works.

   Sorry, I just forgot about that.

> If you do would it be possible for you to do a sanity test?

   Yes, of course.

MBR, Sergei
```
