# Re: bonding (IEEE 802.3ad) not working with qemu/virtio

- From: Jiri Pirko \<jiri@resnulli.us\>
- Date: 2016-01-28 13:33:53 
- List: netdev
- Page: https://ratatoskr.run/netdev/2016/01/11008116
- Thread: https://ratatoskr.run/netdev/2016/01/11007938/t.md

```text
Mon, Jan 25, 2016 at 05:24:48PM CET, bjornar.ness@gmail.com wrote:
>As subject says, 802.3ad bonding is not working with virtio network model.
>
>The only errors I see is:
>
>No 802.3ad response from the link partner for any adapters in the bond.
>
>Dumping the network traffic shows that no LACP packets are sent from the
>host running with virtio driver, changing to for example e1000 solves
>this problem
>with no configuration changes.
>
>Is this a known problem?

I believe the problem is virtio_net for obvious reasons does not report
speed and duplex. Bonding 3ad mode makes that unconfortable :)

Use team ;)
```
