On 15-09-30 02:36 PM, Florian Fainelli wrote:

On 30/09/15 13:32, Arun Parameswaran wrote:

quoted

Add device tree binding documentation for the Broadcom iProc MDIO
bus driver.

Signed-off-by: Arun Parameswaran <arunp-dY08KVG/lbpWk0Htik3J/w@public.gmane.org>
---
 .../devicetree/bindings/net/brcm,iproc-mdio.txt    | 23 ++++++++++++++++++++++
 1 file changed, 23 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/net/brcm,iproc-mdio.txt

diff --git a/Documentation/devicetree/bindings/net/brcm,iproc-mdio.txt b/Documentation/devicetree/bindings/net/brcm,iproc-mdio.txt
new file mode 100644
index 0000000..689f97c
--- /dev/null
+++ b/Documentation/devicetree/bindings/net/brcm,iproc-mdio.txt

@@ -0,0 +1,23 @@
+* Broadcom iProc MDIO bus controller
+
+Required properties:
+- compatible: should be "brcm,iproc-mdio"
+- reg: address and length of the register set for the MDIO interface
+- #size-cells: must be 1
+- #address-cells: must be 0
+
+Child nodes of this MDIO bus controller node are standard Ethernet PHY device
+nodes as described in Documentation/devicetree/bindings/net/phy.txt
+
+Example:
+
+mdio@0x18002000 {

Sorry for not catching this earlier, you might want to drop the leading
0x here from your example, other than that:

Reviewed-by: Florian Fainelli <redacted>

Will fix this.

Thanks,

Arun

--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html