[PATCH 0/7] net: netcp: a set of bug fixes

Subsystems: networking drivers, the rest · Maintainers: Andrew Lunn, "David S. Miller", Eric Dumazet, Jakub Kicinski, Paolo Abeni, Linus Torvalds

Series: 7 patches touching 2 files, +55/-66

STALE4051d

10 messages, 2 authors, 2015-09-25 · open the first message on its own page

[PATCH 0/7] net: netcp: a set of bug fixes

From: Murali Karicheri <hidden>
Date: 2015-09-23 17:36:59

This patch series fixes a set of issues in netcp driver seen during internal
testing of the driver. While at it, do some clean up as well.

The fixes are tested on K2HK, K2L and K2E EVMs and the boot up logs can be
seen at

 http://pastebin.ubuntu.com/12533100/

Murali Karicheri (6):
  net: netcp: remove dead code from the driver
  net: netcp: move netcp_register_interface() to after attach module
  net: netcp: add error check to netcp_allocate_rx_buf()
  net: netcp: check for interface handle in netcp_module_probe()
  net: netcp: allocate buffers to desc before re-enable interrupt
  net: netcp: fix deadlock reported by lockup detector

WingMan Kwok (1):
  net: netcp: ethss: fix error in calling sgmii api with incorrect
    offset

 drivers/net/ethernet/ti/netcp_core.c  | 74 +++++++++++++++++------------------
 drivers/net/ethernet/ti/netcp_ethss.c | 47 ++++++++++------------
 2 files changed, 55 insertions(+), 66 deletions(-)

-- 
1.9.1

[PATCH 7/7] net: netcp: fix deadlock reported by lockup detector

From: Murali Karicheri <hidden>
Date: 2015-09-23 17:37:06

A deadlock trace is seen in netcp driver with lockup detector enabled.
The trace log is provided below for reference. This patch fixes the
bug by removing the usage of netcp_modules_lock within ndo_ops functions.
ndo_{open/close/ioctl)() is already called with rtnl_lock held. So there
is no need to hold another mutex for serialization across processes on
multiple cores.  So remove use of netcp_modules_lock mutex from these
ndo ops functions.

ndo_set_rx_mode() shouldn't be using a mutex as it is called from atomic
context. In the case of ndo_set_rx_mode(), there can be call to this API
without rtnl_lock held from an atomic context. As the underlying modules
are expected to add address to a hardware table, it is to be protected
across concurrent updates and hence a spin lock is used to synchronize
the access. Same with ndo_vlan_rx_add_vid() & ndo_vlan_rx_kill_vid().

Probably the netcp_modules_lock is used to protect the module not being
removed as part of rmmod. Currently this is not fully implemented and
assumes the interface is brought down before doing rmmod of modules.
The support for rmmmod while interface is up is expected in a future
patch set when additional modules such as pa, qos are added. For now
all of the tests such as if up/down, reboot, iperf works fine with this
patch applied.

Deadlock trace seen with lockup detector enabled is shown below for
reference.

[   16.863014] ======================================================
[   16.869183] [ INFO: possible circular locking dependency detected ]
[   16.875441] 4.1.6-01265-gfb1e101 #1 Tainted: G        W
[   16.881176] -------------------------------------------------------
[   16.887432] ifconfig/1662 is trying to acquire lock:
[   16.892386]  (netcp_modules_lock){+.+.+.}, at: [<c03e8110>]
netcp_ndo_open+0x168/0x518
[   16.900321]
[   16.900321] but task is already holding lock:
[   16.906144]  (rtnl_mutex){+.+.+.}, at: [<c053a418>] devinet_ioctl+0xf8/0x7e4
[   16.913206]
[   16.913206] which lock already depends on the new lock.
[   16.913206]
[   16.921372]

203 more lines

diff --git a/drivers/net/ethernet/ti/netcp_core.c b/drivers/net/ethernet/ti/netcp_core.c
index 8026daa..9f9832f 100644
--- a/drivers/net/ethernet/ti/netcp_core.c
+++ b/drivers/net/ethernet/ti/netcp_core.c

@@ -367,7 +367,6 @@ int netcp_register_module(struct netcp_module *module)
 		if (ret < 0)
 			goto fail;
 	}
-
 	mutex_unlock(&netcp_modules_lock);
 	return 0;

@@ -1395,7 +1394,6 @@ static void netcp_addr_sweep_del(struct netcp_intf *netcp)
 			continue;
 		dev_dbg(netcp->ndev_dev, "deleting address %pM, type %x\n",
 			naddr->addr, naddr->type);
-		mutex_lock(&netcp_modules_lock);
 		for_each_module(netcp, priv) {
 			module = priv->netcp_module;
 			if (!module->del_addr)

@@ -1404,7 +1402,6 @@ static void netcp_addr_sweep_del(struct netcp_intf *netcp)
 						 naddr);
 			WARN_ON(error);
 		}
-		mutex_unlock(&netcp_modules_lock);
 		netcp_addr_del(netcp, naddr);
 	}
 }

@@ -1421,7 +1418,7 @@ static void netcp_addr_sweep_add(struct netcp_intf *netcp)
 			continue;
 		dev_dbg(netcp->ndev_dev, "adding address %pM, type %x\n",
 			naddr->addr, naddr->type);
-		mutex_lock(&netcp_modules_lock);
+
 		for_each_module(netcp, priv) {
 			module = priv->netcp_module;
 			if (!module->add_addr)

@@ -1429,7 +1426,6 @@ static void netcp_addr_sweep_add(struct netcp_intf *netcp)
 			error = module->add_addr(priv->module_priv, naddr);
 			WARN_ON(error);
 		}
-		mutex_unlock(&netcp_modules_lock);
 	}
 }

@@ -1443,6 +1439,7 @@ static void netcp_set_rx_mode(struct net_device *ndev)
 		   ndev->flags & IFF_ALLMULTI ||
 		   netdev_mc_count(ndev) > NETCP_MAX_MCAST_ADDR);
 
+	spin_lock(&netcp->lock);
 	/* first clear all marks */
 	netcp_addr_clear_mark(netcp);

@@ -1461,6 +1458,7 @@ static void netcp_set_rx_mode(struct net_device *ndev)
 	/* finally sweep and callout into modules */
 	netcp_addr_sweep_del(netcp);
 	netcp_addr_sweep_add(netcp);
+	spin_unlock(&netcp->lock);
 }
 
 static void netcp_free_navigator_resources(struct netcp_intf *netcp)

@@ -1625,7 +1623,6 @@ static int netcp_ndo_open(struct net_device *ndev)
 		goto fail;
 	}
 
-	mutex_lock(&netcp_modules_lock);
 	for_each_module(netcp, intf_modpriv) {
 		module = intf_modpriv->netcp_module;
 		if (module->open) {

@@ -1636,7 +1633,6 @@ static int netcp_ndo_open(struct net_device *ndev)
 			}
 		}
 	}
-	mutex_unlock(&netcp_modules_lock);
 
 	napi_enable(&netcp->rx_napi);
 	napi_enable(&netcp->tx_napi);

@@ -1653,7 +1649,6 @@ fail_open:
 		if (module->close)
 			module->close(intf_modpriv->module_priv, ndev);
 	}
-	mutex_unlock(&netcp_modules_lock);
 
 fail:
 	netcp_free_navigator_resources(netcp);

@@ -1677,7 +1672,6 @@ static int netcp_ndo_stop(struct net_device *ndev)
 	napi_disable(&netcp->rx_napi);
 	napi_disable(&netcp->tx_napi);
 
-	mutex_lock(&netcp_modules_lock);
 	for_each_module(netcp, intf_modpriv) {
 		module = intf_modpriv->netcp_module;
 		if (module->close) {

@@ -1686,7 +1680,6 @@ static int netcp_ndo_stop(struct net_device *ndev)
 				dev_err(netcp->ndev_dev, "Close failed\n");
 		}
 	}
-	mutex_unlock(&netcp_modules_lock);
 
 	/* Recycle Rx descriptors from completion queue */
 	netcp_empty_rx_queue(netcp);

@@ -1714,7 +1707,6 @@ static int netcp_ndo_ioctl(struct net_device *ndev,
 	if (!netif_running(ndev))
 		return -EINVAL;
 
-	mutex_lock(&netcp_modules_lock);
 	for_each_module(netcp, intf_modpriv) {
 		module = intf_modpriv->netcp_module;
 		if (!module->ioctl)

@@ -1730,7 +1722,6 @@ static int netcp_ndo_ioctl(struct net_device *ndev,
 	}
 
 out:
-	mutex_unlock(&netcp_modules_lock);
 	return (ret == 0) ? 0 : err;
 }

@@ -1765,11 +1756,12 @@ static int netcp_rx_add_vid(struct net_device *ndev, __be16 proto, u16 vid)
 	struct netcp_intf *netcp = netdev_priv(ndev);
 	struct netcp_intf_modpriv *intf_modpriv;
 	struct netcp_module *module;
+	unsigned long flags;
 	int err = 0;
 
 	dev_dbg(netcp->ndev_dev, "adding rx vlan id: %d\n", vid);
 
-	mutex_lock(&netcp_modules_lock);
+	spin_lock_irqsave(&netcp->lock, flags);
 	for_each_module(netcp, intf_modpriv) {
 		module = intf_modpriv->netcp_module;
 		if ((module->add_vid) && (vid != 0)) {

@@ -1781,7 +1773,8 @@ static int netcp_rx_add_vid(struct net_device *ndev, __be16 proto, u16 vid)
 			}
 		}
 	}
-	mutex_unlock(&netcp_modules_lock);
+	spin_unlock_irqrestore(&netcp->lock, flags);
+
 	return err;
 }

@@ -1790,11 +1783,12 @@ static int netcp_rx_kill_vid(struct net_device *ndev, __be16 proto, u16 vid)
 	struct netcp_intf *netcp = netdev_priv(ndev);
 	struct netcp_intf_modpriv *intf_modpriv;
 	struct netcp_module *module;
+	unsigned long flags;
 	int err = 0;
 
 	dev_dbg(netcp->ndev_dev, "removing rx vlan id: %d\n", vid);
 
-	mutex_lock(&netcp_modules_lock);
+	spin_lock_irqsave(&netcp->lock, flags);
 	for_each_module(netcp, intf_modpriv) {
 		module = intf_modpriv->netcp_module;
 		if (module->del_vid) {

@@ -1806,7 +1800,7 @@ static int netcp_rx_kill_vid(struct net_device *ndev, __be16 proto, u16 vid)
 			}
 		}
 	}
-	mutex_unlock(&netcp_modules_lock);
+	spin_unlock_irqrestore(&netcp->lock, flags);
 	return err;
 }

-- 
1.9.1

[PATCH 6/7] net: netcp: allocate buffers to desc before re-enable interrupt

From: Murali Karicheri <hidden>
Date: 2015-09-23 17:37:36

Currently netcp_rxpool_refill() that refill descriptors and attached
buffers to fdq while interrupt is enabled as part of NAPI poll. Doing
it while interrupt is disabled could be beneficial as hardware will
not be starved when CPU is busy with processing interrupt.

Signed-off-by: Murali Karicheri <redacted>
---
 drivers/net/ethernet/ti/netcp_core.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/net/ethernet/ti/netcp_core.c b/drivers/net/ethernet/ti/netcp_core.c
index d39dce3..8026daa 100644
--- a/drivers/net/ethernet/ti/netcp_core.c
+++ b/drivers/net/ethernet/ti/netcp_core.c

@@ -904,12 +904,12 @@ static int netcp_rx_poll(struct napi_struct *napi, int budget)
 
 	packets = netcp_process_rx_packets(netcp, budget);
 
+	netcp_rxpool_refill(netcp);
 	if (packets < budget) {
 		napi_complete(&netcp->rx_napi);
 		knav_queue_enable_notify(netcp->rx_queue);
 	}
 
-	netcp_rxpool_refill(netcp);
 	return packets;
 }

-- 
1.9.1

[PATCH 5/7] net: netcp: check for interface handle in netcp_module_probe()

From: Murali Karicheri <hidden>
Date: 2015-09-23 17:38:03

Currently netcp_module_probe() doesn't check the return value of
of_parse_phandle() that points to the interface data for the
module and then pass the node ptr to the module which is incorrect.
Check for return value and free the intf_modpriv if there is error.

Signed-off-by: Murali Karicheri <redacted>
---
 drivers/net/ethernet/ti/netcp_core.c | 5 +++++
 1 file changed, 5 insertions(+)

diff --git a/drivers/net/ethernet/ti/netcp_core.c b/drivers/net/ethernet/ti/netcp_core.c
index 97e2629..d39dce3 100644
--- a/drivers/net/ethernet/ti/netcp_core.c
+++ b/drivers/net/ethernet/ti/netcp_core.c

@@ -299,6 +299,11 @@ static int netcp_module_probe(struct netcp_device *netcp_device,
 		interface = of_parse_phandle(netcp_intf->node_interface,
 					     module->name, 0);
 
+		if (!interface) {
+			devm_kfree(dev, intf_modpriv);
+			continue;
+		}
+
 		intf_modpriv->netcp_priv = netcp_intf;
 		intf_modpriv->netcp_module = module;
 		list_add_tail(&intf_modpriv->intf_list,

-- 
1.9.1

[PATCH 4/7] net: netcp: add error check to netcp_allocate_rx_buf()

From: Murali Karicheri <hidden>
Date: 2015-09-23 17:38:04

Currently, if netcp_allocate_rx_buf() fails due no descriptors
in the rx free descriptor queue, inside the netcp_rxpool_refill() function
the iterative loop to fill buffers doesn't terminate right away. So modify
the netcp_allocate_rx_buf() to return an error code and use it break the
loop when there is error.

Signed-off-by: Murali Karicheri <redacted>
---
 drivers/net/ethernet/ti/netcp_core.c | 13 +++++++------
 1 file changed, 7 insertions(+), 6 deletions(-)

diff --git a/drivers/net/ethernet/ti/netcp_core.c b/drivers/net/ethernet/ti/netcp_core.c
index cf693de..97e2629 100644
--- a/drivers/net/ethernet/ti/netcp_core.c
+++ b/drivers/net/ethernet/ti/netcp_core.c

@@ -801,7 +801,7 @@ static void netcp_rxpool_free(struct netcp_intf *netcp)
 	netcp->rx_pool = NULL;
 }
 
-static void netcp_allocate_rx_buf(struct netcp_intf *netcp, int fdq)
+static int netcp_allocate_rx_buf(struct netcp_intf *netcp, int fdq)
 {
 	struct knav_dma_desc *hwdesc;
 	unsigned int buf_len, dma_sz;

@@ -815,7 +815,7 @@ static void netcp_allocate_rx_buf(struct netcp_intf *netcp, int fdq)
 	hwdesc = knav_pool_desc_get(netcp->rx_pool);
 	if (IS_ERR_OR_NULL(hwdesc)) {
 		dev_dbg(netcp->ndev_dev, "out of rx pool desc\n");
-		return;
+		return -ENOMEM;
 	}
 
 	if (likely(fdq == 0)) {

@@ -867,25 +867,26 @@ static void netcp_allocate_rx_buf(struct netcp_intf *netcp, int fdq)
 	knav_pool_desc_map(netcp->rx_pool, hwdesc, sizeof(*hwdesc), &dma,
 			   &dma_sz);
 	knav_queue_push(netcp->rx_fdq[fdq], dma, sizeof(*hwdesc), 0);
-	return;
+	return 0;
 
 fail:
 	knav_pool_desc_put(netcp->rx_pool, hwdesc);
+	return -ENOMEM;
 }
 
 /* Refill Rx FDQ with descriptors & attached buffers */
 static void netcp_rxpool_refill(struct netcp_intf *netcp)
 {
 	u32 fdq_deficit[KNAV_DMA_FDQ_PER_CHAN] = {0};
-	int i;
+	int i, ret = 0;
 
 	/* Calculate the FDQ deficit and refill */
 	for (i = 0; i < KNAV_DMA_FDQ_PER_CHAN && netcp->rx_fdq[i]; i++) {
 		fdq_deficit[i] = netcp->rx_queue_depths[i] -
 				 knav_queue_get_count(netcp->rx_fdq[i]);
 
-		while (fdq_deficit[i]--)
-			netcp_allocate_rx_buf(netcp, i);
+		while (fdq_deficit[i]-- && !ret)
+			ret = netcp_allocate_rx_buf(netcp, i);
 	} /* end for fdqs */
 }

-- 
1.9.1

[PATCH 2/7] net: netcp: remove dead code from the driver

From: Murali Karicheri <hidden>
Date: 2015-09-23 17:38:49

netcp_core is the first driver that will get initialized and the modules
(ethss, pa etc) will then get initialized. So the code at the end of
netcp_probe() that iterate over the modules is a dead code as the module
list will be always be empty. So remove this code.

Signed-off-by: Murali Karicheri <redacted>
---
 drivers/net/ethernet/ti/netcp_core.c | 9 ---------
 1 file changed, 9 deletions(-)

diff --git a/drivers/net/ethernet/ti/netcp_core.c b/drivers/net/ethernet/ti/netcp_core.c
index 1a5aca5..c0bc4b9 100644
--- a/drivers/net/ethernet/ti/netcp_core.c
+++ b/drivers/net/ethernet/ti/netcp_core.c

@@ -2040,7 +2040,6 @@ static int netcp_probe(struct platform_device *pdev)
 	struct device_node *child, *interfaces;
 	struct netcp_device *netcp_device;
 	struct device *dev = &pdev->dev;
-	struct netcp_module *module;
 	int ret;
 
 	if (!node) {

@@ -2087,14 +2086,6 @@ static int netcp_probe(struct platform_device *pdev)
 	/* Add the device instance to the list */
 	list_add_tail(&netcp_device->device_list, &netcp_devices);
 
-	/* Probe & attach any modules already registered */
-	mutex_lock(&netcp_modules_lock);
-	for_each_netcp_module(module) {
-		ret = netcp_module_probe(netcp_device, module);
-		if (ret < 0)
-			dev_err(dev, "module(%s) probe failed\n", module->name);
-	}
-	mutex_unlock(&netcp_modules_lock);
 	return 0;
 
 probe_quit_interface:

-- 
1.9.1

[PATCH 3/7] net: netcp: move netcp_register_interface() to after attach module

From: Murali Karicheri <hidden>
Date: 2015-09-23 17:38:50

The netcp interface is not fully initialized before attach the module
to the interface. For example, the tx pipe/rx pipe is initialized
in ethss module as part of attach(). So until this is complete, the
interface can't be registered.  So move registration of interface to
net device outside the current loop that attaches the modules to the
interface.

Signed-off-by: Murali Karicheri <redacted>
---
 drivers/net/ethernet/ti/netcp_core.c | 19 ++++++++++++-------
 1 file changed, 12 insertions(+), 7 deletions(-)

diff --git a/drivers/net/ethernet/ti/netcp_core.c b/drivers/net/ethernet/ti/netcp_core.c
index c0bc4b9..cf693de 100644
--- a/drivers/net/ethernet/ti/netcp_core.c
+++ b/drivers/net/ethernet/ti/netcp_core.c

@@ -291,13 +291,6 @@ static int netcp_module_probe(struct netcp_device *netcp_device,
 			    interface_list) {
 		struct netcp_intf_modpriv *intf_modpriv;
 
-		/* If interface not registered then register now */
-		if (!netcp_intf->netdev_registered)
-			ret = netcp_register_interface(netcp_intf);
-
-		if (ret)
-			return -ENODEV;
-
 		intf_modpriv = devm_kzalloc(dev, sizeof(*intf_modpriv),
 					    GFP_KERNEL);
 		if (!intf_modpriv)

@@ -323,6 +316,18 @@ static int netcp_module_probe(struct netcp_device *netcp_device,
 			continue;
 		}
 	}
+
+	/* Now register the interface with netdev */
+	list_for_each_entry(netcp_intf,
+			    &netcp_device->interface_head,
+			    interface_list) {
+		/* If interface not registered then register now */
+		if (!netcp_intf->netdev_registered) {
+			ret = netcp_register_interface(netcp_intf);
+			if (ret)
+				return -ENODEV;
+		}
+	}
 	return 0;
 }

-- 
1.9.1

[PATCH 1/7] net: netcp: ethss: fix error in calling sgmii api with incorrect offset

From: Murali Karicheri <hidden>
Date: 2015-09-23 17:39:34

From: WingMan Kwok <redacted>

On K2HK, sgmii module registers of slave 0 and 1 are mem
mapped to one contiguous block, while those of slave 2
and 3 are mapped to another contiguous block.  However,
on K2E and K2L, sgmii module registers of all slaves are
mem mapped to one contiguous block.  SGMII APIs expect
slave 0 sgmii base when API is invoked for slave 0 and 1,
and slave 2 sgmii base when invoked for other slaves.
Before this patch, slave 0 sgmii base is always passed to
sgmii API for K2E regardless which slave is the API invoked
for.  This patch fixes the problem.

Signed-off-by: WingMan Kwok <redacted>
---
 drivers/net/ethernet/ti/netcp_ethss.c | 47 +++++++++++++++--------------------
 1 file changed, 20 insertions(+), 27 deletions(-)

diff --git a/drivers/net/ethernet/ti/netcp_ethss.c b/drivers/net/ethernet/ti/netcp_ethss.c
index 6f16d6a..6bff8d8 100644
--- a/drivers/net/ethernet/ti/netcp_ethss.c
+++ b/drivers/net/ethernet/ti/netcp_ethss.c

@@ -77,6 +77,7 @@
 #define GBENU_ALE_OFFSET		0x1e000
 #define GBENU_HOST_PORT_NUM		0
 #define GBENU_NUM_ALE_ENTRIES		1024
+#define GBENU_SGMII_MODULE_SIZE		0x100
 
 /* 10G Ethernet SS defines */
 #define XGBE_MODULE_NAME		"netcp-xgbe"

@@ -149,8 +150,8 @@
 #define XGBE_STATS2_MODULE			2
 
 /* s: 0-based slave_port */
-#define SGMII_BASE(s) \
-	(((s) < 2) ? gbe_dev->sgmii_port_regs : gbe_dev->sgmii_port34_regs)
+#define SGMII_BASE(d, s) \
+	(((s) < 2) ? (d)->sgmii_port_regs : (d)->sgmii_port34_regs)
 
 #define GBE_TX_QUEUE				648
 #define	GBE_TXHOOK_ORDER			0

@@ -1997,13 +1998,8 @@ static void netcp_ethss_update_link_state(struct gbe_priv *gbe_dev,
 		return;
 
 	if (!SLAVE_LINK_IS_XGMII(slave)) {
-		if (gbe_dev->ss_version == GBE_SS_VERSION_14)
-			sgmii_link_state =
-				netcp_sgmii_get_port_link(SGMII_BASE(sp), sp);
-		else
-			sgmii_link_state =
-				netcp_sgmii_get_port_link(
-						gbe_dev->sgmii_port_regs, sp);
+		sgmii_link_state =
+			netcp_sgmii_get_port_link(SGMII_BASE(gbe_dev, sp), sp);
 	}
 
 	phy_link_state = gbe_phy_link_status(slave);

@@ -2100,17 +2096,11 @@ static void gbe_port_config(struct gbe_priv *gbe_dev, struct gbe_slave *slave,
 static void gbe_sgmii_rtreset(struct gbe_priv *priv,
 			      struct gbe_slave *slave, bool set)
 {
-	void __iomem *sgmii_port_regs;
-
 	if (SLAVE_LINK_IS_XGMII(slave))
 		return;
 
-	if ((priv->ss_version == GBE_SS_VERSION_14) && (slave->slave_num >= 2))
-		sgmii_port_regs = priv->sgmii_port34_regs;
-	else
-		sgmii_port_regs = priv->sgmii_port_regs;
-
-	netcp_sgmii_rtreset(sgmii_port_regs, slave->slave_num, set);
+	netcp_sgmii_rtreset(SGMII_BASE(priv, slave->slave_num),
+			    slave->slave_num, set);
 }
 
 static void gbe_slave_stop(struct gbe_intf *intf)

@@ -2136,17 +2126,12 @@ static void gbe_slave_stop(struct gbe_intf *intf)
 
 static void gbe_sgmii_config(struct gbe_priv *priv, struct gbe_slave *slave)
 {
-	void __iomem *sgmii_port_regs;
-
-	sgmii_port_regs = priv->sgmii_port_regs;
-	if ((priv->ss_version == GBE_SS_VERSION_14) && (slave->slave_num >= 2))
-		sgmii_port_regs = priv->sgmii_port34_regs;
+	if (SLAVE_LINK_IS_XGMII(slave))
+		return;
 
-	if (!SLAVE_LINK_IS_XGMII(slave)) {
-		netcp_sgmii_reset(sgmii_port_regs, slave->slave_num);
-		netcp_sgmii_config(sgmii_port_regs, slave->slave_num,
-				   slave->link_interface);
-	}
+	netcp_sgmii_reset(SGMII_BASE(priv, slave->slave_num), slave->slave_num);
+	netcp_sgmii_config(SGMII_BASE(priv, slave->slave_num), slave->slave_num,
+			   slave->link_interface);
 }
 
 static int gbe_slave_open(struct gbe_intf *gbe_intf)

@@ -2997,6 +2982,14 @@ static int set_gbenu_ethss_priv(struct gbe_priv *gbe_dev,
 	gbe_dev->switch_regs = regs;
 
 	gbe_dev->sgmii_port_regs = gbe_dev->ss_regs + GBENU_SGMII_MODULE_OFFSET;
+
+	/* Although sgmii modules are mem mapped to one contiguous
+	 * region on GBENU devices, setting sgmii_port34_regs allows
+	 * consistent code when accessing sgmii api
+	 */
+	gbe_dev->sgmii_port34_regs = gbe_dev->sgmii_port_regs +
+				     (2 * GBENU_SGMII_MODULE_SIZE);
+
 	gbe_dev->host_port_regs = gbe_dev->switch_regs + GBENU_HOST_PORT_OFFSET;
 
 	for (i = 0; i < (gbe_dev->max_num_ports); i++)

-- 
1.9.1

Re: [PATCH 0/7] net: netcp: a set of bug fixes

From: David Miller <davem@davemloft.net>
Date: 2015-09-23 21:39:15

From: Murali Karicheri <redacted>
Date: Wed, 23 Sep 2015 13:37:04 -0400

This patch series fixes a set of issues in netcp driver seen during internal
testing of the driver. While at it, do some clean up as well.

The fixes are tested on K2HK, K2L and K2E EVMs and the boot up logs can be
seen at

 http://pastebin.ubuntu.com/12533100/

Series applied, thanks.

Re: [PATCH 0/7] net: netcp: a set of bug fixes

From: Murali Karicheri <hidden>
Date: 2015-09-25 13:35:01

On 09/23/2015 01:37 PM, Murali Karicheri wrote:

This patch series fixes a set of issues in netcp driver seen during internal
testing of the driver. While at it, do some clean up as well.

The fixes are tested on K2HK, K2L and K2E EVMs and the boot up logs can be
seen at

  http://pastebin.ubuntu.com/12533100/

Murali Karicheri (6):
   net: netcp: remove dead code from the driver
   net: netcp: move netcp_register_interface() to after attach module
   net: netcp: add error check to netcp_allocate_rx_buf()
   net: netcp: check for interface handle in netcp_module_probe()
   net: netcp: allocate buffers to desc before re-enable interrupt
   net: netcp: fix deadlock reported by lockup detector

WingMan Kwok (1):
   net: netcp: ethss: fix error in calling sgmii api with incorrect
     offset

  drivers/net/ethernet/ti/netcp_core.c  | 74 +++++++++++++++++------------------
  drivers/net/ethernet/ti/netcp_ethss.c | 47 ++++++++++------------
  2 files changed, 55 insertions(+), 66 deletions(-)

Stable Maintainers, Greg,

Please ignore this as NetCP driver is only enabled in v4.2 and I was initially thinking it was in v4.1. So you don't need this for any stable release such as v4.1.x

Sorry for the noise.

Thanks
-- 
Murali Karicheri
Linux Kernel, Keystone

`h`	back out one level
`j`	next message in thread
`k`	previous message in thread
`l`	drill in
`Esc`	close help / fold thread tree
`?`	toggle this help