# Re: \[PATCH net-next 00/11\] convert stmmac glue layers into platform drivers

- From: David Miller \<hidden\>
- Date: 2015-05-15 16:44:46 
- List: netdev
- Page: https://ratatoskr.run/netdev/2015/05/8713218
- Thread: https://ratatoskr.run/linux-arm-kernel/2015/05/8713020/t.md

```text
From: Joachim Eastwood <redacted>
Date: Thu, 14 May 2015 12:10:55 +0200

> This patch set aims to convert the current dwmac glue layers into
> proper platform drivers as request by Arnd[1]. These changes start
> from patch 3 and onwards.
> 
> Overview:
> Platform driver functions like probe and remove are exported from
> the stmmac platform and then used in subsequent glue later
> conversions. The conversion involes adding the platform driver
> boiler plate code and adding it to the build system. The last patch
> removes the driver from the stmmac platform code thus making it into
> a library for common platform driver functions.
> 
> The two first patches adds glue layer for my platform. I chose to
> first add old style glue layer and then convert it. The churn this
> creates is just 3 lines.
> 
> I would be very nice if people could test this patch set on their
> respective platform. My testing has been limited to compiling and
> testing on my (LPC18xx) platform. Thanks!
> 
> Next I will look into cleaning up the stmmac platform code.
> 
> [1] http://marc.info/?l=linux-arm-kernel&m=143059524606459&w=2

Series applied, thanks Joachim.
```
