[net-next PATCH 1/3] devicetree: Add compatible string for Zynq Ultrascale MPSoC
DORMANTno replies
REVIEWED: 1 (0M)
From: Harini Katakam <hidden>
Date: 2015-04-10 09:32:05
Also in:
linux-devicetree, lkml
Subsystem:
networking drivers, open firmware and flattened device tree bindings, the rest · Maintainers:
Andrew Lunn, "David S. Miller", Eric Dumazet, Jakub Kicinski, Paolo Abeni, Rob Herring, Krzysztof Kozlowski, Conor Dooley, Linus Torvalds
1 review trailer.
Add "cdns,zynqmp-gem" to be used for Zynq Ultrascal MPSoc. Signed-off-by: Harini Katakam <redacted> Reviewed-by: Punnaiah Choudary Kalluri <redacted> --- Documentation/devicetree/bindings/net/macb.txt | 1 + 1 file changed, 1 insertion(+)
diff --git a/Documentation/devicetree/bindings/net/macb.txt b/Documentation/devicetree/bindings/net/macb.txt
index ba19d67..a112add 100644
--- a/Documentation/devicetree/bindings/net/macb.txt
+++ b/Documentation/devicetree/bindings/net/macb.txt@@ -9,6 +9,7 @@ Required properties: the Cadence GEM, or the generic form: "cdns,gem". Use "cdns,sama5d3-gem" for the Gigabit IP available on Atmel sama5d3 SoCs. Use "cdns,sama5d4-gem" for the Gigabit IP available on Atmel sama5d4 SoCs. + Use "cdns,zynqmp-gem" for Zynq Ultrascale MPSoC. - reg: Address and length of the register set for the device - interrupts: Should contain macb interrupt - phy-mode: See ethernet.txt file in the same directory.
--
1.7.9.5