[PATCH] net/macb: Update DT bindings documentation
From: Boris Brezillon <hidden>
Date: 2015-03-07 06:37:19
Add missing "cdns,at91sam9260-macb", "atmel,sama5d3-gem" and "atmel,sama5d4-gem" compatible strings. Signed-off-by: Boris Brezillon <redacted> Reviewed-by: Alexandre Belloni <redacted> Acked-by: Nicolas Ferre <redacted> --- Documentation/devicetree/bindings/net/macb.txt | 5 ++++- 1 file changed, 4 insertions(+), 1 deletion(-)
diff --git a/Documentation/devicetree/bindings/net/macb.txt b/Documentation/devicetree/bindings/net/macb.txt
index aaa6964..ba19d67 100644
--- a/Documentation/devicetree/bindings/net/macb.txt
+++ b/Documentation/devicetree/bindings/net/macb.txt@@ -2,10 +2,13 @@ Required properties: - compatible: Should be "cdns,[<chip>-]{macb|gem}" - Use "cdns,at91sam9260-macb" Atmel at91sam9260 and at91sam9263 SoCs. + Use "cdns,at91sam9260-macb" for Atmel at91sam9 SoCs or the 10/100Mbit IP + available on sama5d3 SoCs. Use "cdns,at32ap7000-macb" for other 10/100 usage or use the generic form: "cdns,macb". Use "cdns,pc302-gem" for Picochip picoXcell pc302 and later devices based on the Cadence GEM, or the generic form: "cdns,gem". + Use "cdns,sama5d3-gem" for the Gigabit IP available on Atmel sama5d3 SoCs. + Use "cdns,sama5d4-gem" for the Gigabit IP available on Atmel sama5d4 SoCs. - reg: Address and length of the register set for the device - interrupts: Should contain macb interrupt - phy-mode: See ethernet.txt file in the same directory.
--
1.9.1