[PATCH] e1000e: fixup comments jumbled by i219 support
From: John W. Linville <hidden>
Date: 2015-02-25 19:15:13
Commit 79849ebc0e06 (e1000e: initial support for i219) jumbled some comments in e1000_init_nvm_params_ich8lan. This patch rearranges them in a way that I think makes more sense. Signed-off-by: John W. Linville <redacted> Cc: Jeff Kirsher <redacted> Cc: David Ertman <david.m.ertman@intel.com> --- drivers/net/ethernet/intel/e1000e/ich8lan.c | 9 +++++---- 1 file changed, 5 insertions(+), 4 deletions(-)
diff --git a/drivers/net/ethernet/intel/e1000e/ich8lan.c b/drivers/net/ethernet/intel/e1000e/ich8lan.c
index 7523f510c7e4..a118ecffe697 100644
--- a/drivers/net/ethernet/intel/e1000e/ich8lan.c
+++ b/drivers/net/ethernet/intel/e1000e/ich8lan.c@@ -603,12 +603,12 @@ static s32 e1000_init_nvm_params_ich8lan(struct e1000_hw *hw) u16 i; u32 nvm_size; - /* Can't read flash registers if the register set isn't mapped. */ nvm->type = e1000_nvm_flash_sw; - /* in SPT, gfpreg doesn't exist. NVM size is taken from the - * STRAP register - */ + if (hw->mac.type == e1000_pch_spt) { + /* in SPT, gfpreg doesn't exist. NVM size is taken from the + * STRAP register + */ nvm->flash_base_addr = 0; nvm_size = (((er32(STRAP) >> 1) & 0x1F) + 1) * NVM_SIZE_MULTIPLIER;
@@ -618,6 +618,7 @@ static s32 e1000_init_nvm_params_ich8lan(struct e1000_hw *hw) /* Set the base address for flash register access */ hw->flash_address = hw->hw_addr + E1000_FLASH_BASE_ADDR; } else { + /* Can't read flash registers if the register set isn't mapped. */ if (!hw->flash_address) { e_dbg("ERROR: Flash registers not mapped\n"); return -E1000_ERR_CONFIG;
--
2.1.0