[PATCH] xen-netfront: Use static attribute groups for sysfs entries

Subsystems: networking drivers, the rest, xen hypervisor interface

STALE4277d

3 messages, 3 authors, 2015-02-05 · open the first message on its own page

[PATCH] xen-netfront: Use static attribute groups for sysfs entries

From: Takashi Iwai <hidden>
Date: 2015-02-04 13:38:59

Instead of manual calls of device_create_file() and
device_remove_files(), assign the static attribute groups to netdev
groups array.  This simplifies the code and avoids the possible
races.

Signed-off-by: Takashi Iwai <redacted>
---
 drivers/net/xen-netfront.c | 62 ++++++++++++----------------------------------
 1 file changed, 16 insertions(+), 46 deletions(-)
diff --git a/drivers/net/xen-netfront.c b/drivers/net/xen-netfront.c
index d8c10764f130..1524d2ee1c21 100644
--- a/drivers/net/xen-netfront.c
+++ b/drivers/net/xen-netfront.c
@@ -223,11 +223,7 @@ static grant_ref_t xennet_get_rx_ref(struct netfront_queue *queue,
 }
 
 #ifdef CONFIG_SYSFS
-static int xennet_sysfs_addif(struct net_device *netdev);
-static void xennet_sysfs_delif(struct net_device *netdev);
-#else /* !CONFIG_SYSFS */
-#define xennet_sysfs_addif(dev) (0)
-#define xennet_sysfs_delif(dev) do { } while (0)
+static const struct attribute_group xennet_dev_group;
 #endif
 
 static bool xennet_can_sg(struct net_device *dev)
@@ -1367,20 +1363,15 @@ static int netfront_probe(struct xenbus_device *dev,
 
 	info = netdev_priv(netdev);
 	dev_set_drvdata(&dev->dev, info);
-
+#ifdef CONFIG_SYSFS
+	info->netdev->sysfs_groups[0] = &xennet_dev_group;
+#endif
 	err = register_netdev(info->netdev);
 	if (err) {
 		pr_warn("%s: register_netdev err=%d\n", __func__, err);
 		goto fail;
 	}
 
-	err = xennet_sysfs_addif(info->netdev);
-	if (err) {
-		unregister_netdev(info->netdev);
-		pr_warn("%s: add sysfs failed err=%d\n", __func__, err);
-		goto fail;
-	}
-
 	return 0;
 
  fail:
@@ -2144,39 +2135,20 @@ static ssize_t store_rxbuf(struct device *dev,
 	return len;
 }
 
-static struct device_attribute xennet_attrs[] = {
-	__ATTR(rxbuf_min, S_IRUGO|S_IWUSR, show_rxbuf, store_rxbuf),
-	__ATTR(rxbuf_max, S_IRUGO|S_IWUSR, show_rxbuf, store_rxbuf),
-	__ATTR(rxbuf_cur, S_IRUGO, show_rxbuf, NULL),
-};
+static DEVICE_ATTR(rxbuf_min, S_IRUGO|S_IWUSR, show_rxbuf, store_rxbuf);
+static DEVICE_ATTR(rxbuf_max, S_IRUGO|S_IWUSR, show_rxbuf, store_rxbuf);
+static DEVICE_ATTR(rxbuf_cur, S_IRUGO, show_rxbuf, NULL);
 
-static int xennet_sysfs_addif(struct net_device *netdev)
-{
-	int i;
-	int err;
-
-	for (i = 0; i < ARRAY_SIZE(xennet_attrs); i++) {
-		err = device_create_file(&netdev->dev,
-					   &xennet_attrs[i]);
-		if (err)
-			goto fail;
-	}
-	return 0;
-
- fail:
-	while (--i >= 0)
-		device_remove_file(&netdev->dev, &xennet_attrs[i]);
-	return err;
-}
-
-static void xennet_sysfs_delif(struct net_device *netdev)
-{
-	int i;
-
-	for (i = 0; i < ARRAY_SIZE(xennet_attrs); i++)
-		device_remove_file(&netdev->dev, &xennet_attrs[i]);
-}
+static struct attribute *xennet_dev_attrs[] = {
+	&dev_attr_rxbuf_min.attr,
+	&dev_attr_rxbuf_max.attr,
+	&dev_attr_rxbuf_cur.attr,
+	NULL
+};
 
+static const struct attribute_group xennet_dev_group = {
+	.attrs = xennet_dev_attrs
+};
 #endif /* CONFIG_SYSFS */
 
 static int xennet_remove(struct xenbus_device *dev)
@@ -2190,8 +2162,6 @@ static int xennet_remove(struct xenbus_device *dev)
 
 	xennet_disconnect_backend(info);
 
-	xennet_sysfs_delif(info->netdev);
-
 	unregister_netdev(info->netdev);
 
 	for (i = 0; i < num_queues; ++i) {
-- 
2.2.2

Re: [Xen-devel] [PATCH] xen-netfront: Use static attribute groups for sysfs entries

From: David Vrabel <hidden>
Date: 2015-02-04 13:53:42

On 04/02/15 13:38, Takashi Iwai wrote:
Instead of manual calls of device_create_file() and
device_remove_files(), assign the static attribute groups to netdev
groups array.  This simplifies the code and avoids the possible
races.
Acked-by: David Vrabel <redacted>

David

Re: [PATCH] xen-netfront: Use static attribute groups for sysfs entries

From: David Miller <davem@davemloft.net>
Date: 2015-02-05 08:33:42

From: Takashi Iwai <redacted>
Date: Wed,  4 Feb 2015 14:38:55 +0100
Instead of manual calls of device_create_file() and
device_remove_files(), assign the static attribute groups to netdev
groups array.  This simplifies the code and avoids the possible
races.

Signed-off-by: Takashi Iwai <redacted>
Applied.
Keyboard shortcuts
hback out one level
jnext message in thread
kprevious message in thread
ldrill in
Escclose help / fold thread tree
?toggle this help