10 messages, 3 authors, 2014-09-16 · open the first message on its own page
From: Hayes Wang <hidden>
Date: 2014-09-12 03:39:27
There are two issues for hw rx vlan. The patches are used to fix them. Hayes Wang (2): r8169: fix the default setting of rx vlan r8169: fix setting rx vlan drivers/net/ethernet/realtek/r8169.c | 9 +++++++-- 1 file changed, 7 insertions(+), 2 deletions(-) -- 1.9.3
From: Hayes Wang <hidden>
Date: 2014-09-12 03:39:30
If the parameter "features" of __rtl8169_set_features() is equal to dev->features, the variable "changed" is alwayes 0, and nothing would be changed. Signed-off-by: Hayes Wang <redacted> --- drivers/net/ethernet/realtek/r8169.c | 7 ++++++- 1 file changed, 6 insertions(+), 1 deletion(-)
diff --git a/drivers/net/ethernet/realtek/r8169.c b/drivers/net/ethernet/realtek/r8169.c
index 91652e7..f3ce284 100644
--- a/drivers/net/ethernet/realtek/r8169.c
+++ b/drivers/net/ethernet/realtek/r8169.c@@ -6707,7 +6707,12 @@ static int rtl_open(struct net_device *dev) rtl8169_init_phy(dev, tp); - __rtl8169_set_features(dev, dev->features); + if (dev->features & NETIF_F_HW_VLAN_CTAG_RX) + tp->cp_cmd |= RxVlan; + else + tp->cp_cmd &= ~RxVlan; + + RTL_W16(CPlusCmd, tp->cp_cmd); rtl_pll_power_up(tp);
--
1.9.3
From: Hayes Wang <hidden>
Date: 2014-09-12 03:39:32
The setting should depend on the new features not the current one. Signed-off-by: Hayes Wang <redacted> --- drivers/net/ethernet/realtek/r8169.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/net/ethernet/realtek/r8169.c b/drivers/net/ethernet/realtek/r8169.c
index f3ce284..7a7860a 100644
--- a/drivers/net/ethernet/realtek/r8169.c
+++ b/drivers/net/ethernet/realtek/r8169.c@@ -1796,7 +1796,7 @@ static void __rtl8169_set_features(struct net_device *dev, else tp->cp_cmd &= ~RxChkSum; - if (dev->features & NETIF_F_HW_VLAN_CTAG_RX) + if (features & NETIF_F_HW_VLAN_CTAG_RX) tp->cp_cmd |= RxVlan; else tp->cp_cmd &= ~RxVlan;
--
1.9.3
From: Francois Romieu <romieu@fr.zoreil.com>
Date: 2014-09-12 19:40:24
Hayes Wang [off-list ref] :
If the parameter "features" of __rtl8169_set_features() is equal to dev->features, the variable "changed" is alwayes 0, and nothing would be changed.
[...]
diff --git a/drivers/net/ethernet/realtek/r8169.c b/drivers/net/ethernet/realtek/r8169.c index 91652e7..f3ce284 100644 --- a/drivers/net/ethernet/realtek/r8169.c +++ b/drivers/net/ethernet/realtek/r8169.c@@ -6707,7 +6707,12 @@ static int rtl_open(struct net_device *dev) rtl8169_init_phy(dev, tp); - __rtl8169_set_features(dev, dev->features); + if (dev->features & NETIF_F_HW_VLAN_CTAG_RX) + tp->cp_cmd |= RxVlan; + else + tp->cp_cmd &= ~RxVlan; + + RTL_W16(CPlusCmd, tp->cp_cmd);
Damn good catch.
The same fix should be relevant for NETIF_F_RXCSUM. You may thus as
well remove the "changed" test in __rtl8169_set_features and keep
everything there.
The commit message could notify the driver don't behave as expected since
6bbe021d405fff46b64a08dca51b06897b897a67 ("r8169: Support RX-ALL flag.")
to ease stable people's work.
--
Ueimor
From: David Miller <davem@davemloft.net>
Date: 2014-09-13 20:53:27
From: Hayes Wang <redacted> Date: Fri, 12 Sep 2014 11:35:10 +0800
There are two issues for hw rx vlan. The patches are used to fix them.
Series applied, thanks.
From: Hayes Wang <hidden>
Date: 2014-09-15 03:23:10
Francois Romieu [mailto:romieu@fr.zoreil.com]
Sent: Saturday, September 13, 2014 3:40 AM
[...]
The same fix should be relevant for NETIF_F_RXCSUM. You may thus as well remove the "changed" test in __rtl8169_set_features and keep everything there.
In the probe function (rtl_init_one), RxChkSum has been assgined to tp->cp_cmd, so only the vlan setting is incorrect. Therefore, I fix it only. Do I still have to remove the "changed" test? Best Regards, Hayes
From: Francois Romieu <romieu@fr.zoreil.com>
Date: 2014-09-16 00:03:37
Hayes Wang [off-list ref] :
Francois Romieu [mailto:romieu@fr.zoreil.com]quoted
Sent: Saturday, September 13, 2014 3:40 AM[...]quoted
The same fix should be relevant for NETIF_F_RXCSUM. You may thus as well remove the "changed" test in __rtl8169_set_features and keep everything there.In the probe function (rtl_init_one), RxChkSum has been assgined to tp->cp_cmd, so only the vlan setting is incorrect. Therefore, I fix it only. Do I still have to remove the "changed" test?
You are right, this part does work. However it's getting messy and the code stomps CPlusCmd in rtl_open right before it's given a chance to be read in hw_start. Something like the untested patch below should avoid it and keep related things together. Thoughts ?
diff --git a/drivers/net/ethernet/realtek/r8169.c b/drivers/net/ethernet/realtek/r8169.c
index 7a7860a..ef2cee5 100644
--- a/drivers/net/ethernet/realtek/r8169.c
+++ b/drivers/net/ethernet/realtek/r8169.c@@ -1783,33 +1783,31 @@ static void __rtl8169_set_features(struct net_device *dev, netdev_features_t features) { struct rtl8169_private *tp = netdev_priv(dev); - netdev_features_t changed = features ^ dev->features; void __iomem *ioaddr = tp->mmio_addr; + u32 rx_config; - if (!(changed & (NETIF_F_RXALL | NETIF_F_RXCSUM | - NETIF_F_HW_VLAN_CTAG_RX))) - return; + rx_config = RTL_R32(RxConfig); + if (features & NETIF_F_RXALL) + rx_config |= (AcceptErr | AcceptRunt); + else + rx_config &= ~(AcceptErr | AcceptRunt); - if (changed & (NETIF_F_RXCSUM | NETIF_F_HW_VLAN_CTAG_RX)) { - if (features & NETIF_F_RXCSUM) - tp->cp_cmd |= RxChkSum; - else - tp->cp_cmd &= ~RxChkSum; + RTL_W32(RxConfig, rx_config); - if (features & NETIF_F_HW_VLAN_CTAG_RX) - tp->cp_cmd |= RxVlan; - else - tp->cp_cmd &= ~RxVlan; + if (features & NETIF_F_RXCSUM) + tp->cp_cmd |= RxChkSum; + else + tp->cp_cmd &= ~RxChkSum; - RTL_W16(CPlusCmd, tp->cp_cmd); - RTL_R16(CPlusCmd); - } - if (changed & NETIF_F_RXALL) { - int tmp = (RTL_R32(RxConfig) & ~(AcceptErr | AcceptRunt)); - if (features & NETIF_F_RXALL) - tmp |= (AcceptErr | AcceptRunt); - RTL_W32(RxConfig, tmp); - } + if (features & NETIF_F_HW_VLAN_CTAG_RX) + tp->cp_cmd |= RxVlan; + else + tp->cp_cmd &= ~RxVlan; + + tp->cp_cmd |= RTL_R16(CPlusCmd) & ~(RxVlan | RxChkSum); + + RTL_W16(CPlusCmd, tp->cp_cmd); + RTL_R16(CPlusCmd); } static int rtl8169_set_features(struct net_device *dev,
@@ -1817,8 +1815,11 @@ static int rtl8169_set_features(struct net_device *dev, { struct rtl8169_private *tp = netdev_priv(dev); + features &= NETIF_F_RXALL | NETIF_F_RXCSUM | NETIF_F_HW_VLAN_CTAG_RX; + rtl_lock_work(tp); - __rtl8169_set_features(dev, features); + if (features ^ dev->features); + __rtl8169_set_features(dev, features); rtl_unlock_work(tp); return 0;
@@ -6707,12 +6708,7 @@ static int rtl_open(struct net_device *dev) rtl8169_init_phy(dev, tp); - if (dev->features & NETIF_F_HW_VLAN_CTAG_RX) - tp->cp_cmd |= RxVlan; - else - tp->cp_cmd &= ~RxVlan; - - RTL_W16(CPlusCmd, tp->cp_cmd); + __rtl8169_set_features(dev, dev->features); rtl_pll_power_up(tp);
@@ -7123,8 +7119,7 @@ static void rtl_hw_initialize(struct rtl8169_private *tp) } } -static int -rtl_init_one(struct pci_dev *pdev, const struct pci_device_id *ent) +static int rtl_init_one(struct pci_dev *pdev, const struct pci_device_id *ent) { const struct rtl_cfg_info *cfg = rtl_cfg_infos + ent->driver_data; const unsigned int region = cfg->region;
@@ -7199,7 +7194,7 @@ rtl_init_one(struct pci_dev *pdev, const struct pci_device_id *ent) goto err_out_mwi_2; } - tp->cp_cmd = RxChkSum; + tp->cp_cmd = 0; if ((sizeof(dma_addr_t) > 4) && !pci_set_dma_mask(pdev, DMA_BIT_MASK(64)) && use_dac) {
@@ -7240,13 +7235,6 @@ rtl_init_one(struct pci_dev *pdev, const struct pci_device_id *ent) pci_set_master(pdev); - /* - * Pretend we are using VLANs; This bypasses a nasty bug where - * Interrupts stop flowing on high load on 8110SCd controllers. - */ - if (tp->mac_version == RTL_GIGA_MAC_VER_05) - tp->cp_cmd |= RxVlan; - rtl_init_mdio_ops(tp); rtl_init_pll_power_ops(tp); rtl_init_jumbo_ops(tp);
@@ -7307,8 +7295,14 @@ rtl_init_one(struct pci_dev *pdev, const struct pci_device_id *ent) dev->vlan_features = NETIF_F_SG | NETIF_F_IP_CSUM | NETIF_F_TSO | NETIF_F_HIGHDMA; + tp->cp_cmd |= RxChkSum | RxVlan; + + /* + * Pretend we are using VLANs; This bypasses a nasty bug where + * Interrupts stop flowing on high load on 8110SCd controllers. + */ if (tp->mac_version == RTL_GIGA_MAC_VER_05) - /* 8110SCd requires hardware Rx VLAN - disallow toggling */ + /* Disallow toggling */ dev->hw_features &= ~NETIF_F_HW_VLAN_CTAG_RX; if (tp->txd_version == RTL_TD_0)
From: Hayes Wang <hidden>
Date: 2014-09-16 03:23:44
From: Francois Romieu [mailto:romieu@fr.zoreil.com]
Sent: Tuesday, September 16, 2014 8:03 AM
[...]
However it's getting messy and the code stomps CPlusCmd in rtl_open right before it's given a chance to be read in hw_start. Something like the untested patch below should avoid it and keep related things together.
You are right. Your patch is more reasonable. I would sent the patch. Thanks. Best Regards, Hayes
From: Hayes Wang <hidden>
Date: 2014-09-16 03:41:01
Remove the "changed" test in __rtl8169_set_features(). Instead, do simple test in rtl8169_set_features(). Set the RxChkSum and RxVlan through __rtl8169_set_features() in rtl_open(). Signed-off-by: Francois Romieu <romieu@fr.zoreil.com> Signed-off-by: Hayes Wang <redacted> --- drivers/net/ethernet/realtek/r8169.c | 74 +++++++++++++++++------------------- 1 file changed, 34 insertions(+), 40 deletions(-)
diff --git a/drivers/net/ethernet/realtek/r8169.c b/drivers/net/ethernet/realtek/r8169.c
index 7a7860a..ef2cee5 100644
--- a/drivers/net/ethernet/realtek/r8169.c
+++ b/drivers/net/ethernet/realtek/r8169.c@@ -1783,33 +1783,31 @@ static void __rtl8169_set_features(struct net_device *dev, netdev_features_t features) { struct rtl8169_private *tp = netdev_priv(dev); - netdev_features_t changed = features ^ dev->features; void __iomem *ioaddr = tp->mmio_addr; + u32 rx_config; - if (!(changed & (NETIF_F_RXALL | NETIF_F_RXCSUM | - NETIF_F_HW_VLAN_CTAG_RX))) - return; + rx_config = RTL_R32(RxConfig); + if (features & NETIF_F_RXALL) + rx_config |= (AcceptErr | AcceptRunt); + else + rx_config &= ~(AcceptErr | AcceptRunt); - if (changed & (NETIF_F_RXCSUM | NETIF_F_HW_VLAN_CTAG_RX)) { - if (features & NETIF_F_RXCSUM) - tp->cp_cmd |= RxChkSum; - else - tp->cp_cmd &= ~RxChkSum; + RTL_W32(RxConfig, rx_config); - if (features & NETIF_F_HW_VLAN_CTAG_RX) - tp->cp_cmd |= RxVlan; - else - tp->cp_cmd &= ~RxVlan; + if (features & NETIF_F_RXCSUM) + tp->cp_cmd |= RxChkSum; + else + tp->cp_cmd &= ~RxChkSum; - RTL_W16(CPlusCmd, tp->cp_cmd); - RTL_R16(CPlusCmd); - } - if (changed & NETIF_F_RXALL) { - int tmp = (RTL_R32(RxConfig) & ~(AcceptErr | AcceptRunt)); - if (features & NETIF_F_RXALL) - tmp |= (AcceptErr | AcceptRunt); - RTL_W32(RxConfig, tmp); - } + if (features & NETIF_F_HW_VLAN_CTAG_RX) + tp->cp_cmd |= RxVlan; + else + tp->cp_cmd &= ~RxVlan; + + tp->cp_cmd |= RTL_R16(CPlusCmd) & ~(RxVlan | RxChkSum); + + RTL_W16(CPlusCmd, tp->cp_cmd); + RTL_R16(CPlusCmd); } static int rtl8169_set_features(struct net_device *dev,
@@ -1817,8 +1815,11 @@ static int rtl8169_set_features(struct net_device *dev, { struct rtl8169_private *tp = netdev_priv(dev); + features &= NETIF_F_RXALL | NETIF_F_RXCSUM | NETIF_F_HW_VLAN_CTAG_RX; + rtl_lock_work(tp); - __rtl8169_set_features(dev, features); + if (features ^ dev->features); + __rtl8169_set_features(dev, features); rtl_unlock_work(tp); return 0;
@@ -6707,12 +6708,7 @@ static int rtl_open(struct net_device *dev) rtl8169_init_phy(dev, tp); - if (dev->features & NETIF_F_HW_VLAN_CTAG_RX) - tp->cp_cmd |= RxVlan; - else - tp->cp_cmd &= ~RxVlan; - - RTL_W16(CPlusCmd, tp->cp_cmd); + __rtl8169_set_features(dev, dev->features); rtl_pll_power_up(tp);
@@ -7123,8 +7119,7 @@ static void rtl_hw_initialize(struct rtl8169_private *tp) } } -static int -rtl_init_one(struct pci_dev *pdev, const struct pci_device_id *ent) +static int rtl_init_one(struct pci_dev *pdev, const struct pci_device_id *ent) { const struct rtl_cfg_info *cfg = rtl_cfg_infos + ent->driver_data; const unsigned int region = cfg->region;
@@ -7199,7 +7194,7 @@ rtl_init_one(struct pci_dev *pdev, const struct pci_device_id *ent) goto err_out_mwi_2; } - tp->cp_cmd = RxChkSum; + tp->cp_cmd = 0; if ((sizeof(dma_addr_t) > 4) && !pci_set_dma_mask(pdev, DMA_BIT_MASK(64)) && use_dac) {
@@ -7240,13 +7235,6 @@ rtl_init_one(struct pci_dev *pdev, const struct pci_device_id *ent) pci_set_master(pdev); - /* - * Pretend we are using VLANs; This bypasses a nasty bug where - * Interrupts stop flowing on high load on 8110SCd controllers. - */ - if (tp->mac_version == RTL_GIGA_MAC_VER_05) - tp->cp_cmd |= RxVlan; - rtl_init_mdio_ops(tp); rtl_init_pll_power_ops(tp); rtl_init_jumbo_ops(tp);
@@ -7307,8 +7295,14 @@ rtl_init_one(struct pci_dev *pdev, const struct pci_device_id *ent) dev->vlan_features = NETIF_F_SG | NETIF_F_IP_CSUM | NETIF_F_TSO | NETIF_F_HIGHDMA; + tp->cp_cmd |= RxChkSum | RxVlan; + + /* + * Pretend we are using VLANs; This bypasses a nasty bug where + * Interrupts stop flowing on high load on 8110SCd controllers. + */ if (tp->mac_version == RTL_GIGA_MAC_VER_05) - /* 8110SCd requires hardware Rx VLAN - disallow toggling */ + /* Disallow toggling */ dev->hw_features &= ~NETIF_F_HW_VLAN_CTAG_RX; if (tp->txd_version == RTL_TD_0)
--
1.9.3
From: David Miller <davem@davemloft.net>
Date: 2014-09-16 19:58:45
From: Hayes Wang <redacted> Date: Tue, 16 Sep 2014 11:40:47 +0800
Remove the "changed" test in __rtl8169_set_features(). Instead, do simple test in rtl8169_set_features(). Set the RxChkSum and RxVlan through __rtl8169_set_features() in rtl_open(). Signed-off-by: Francois Romieu <romieu@fr.zoreil.com> Signed-off-by: Hayes Wang <redacted>
Applied, thanks.