[PATCH] net: bcmgenet: fix reference counting for phy node

Subsystems: broadcom genet ethernet driver, networking drivers, the rest

STALE4384d

2 messages, 2 authors, 2014-08-07 · open the first message on its own page

[PATCH] net: bcmgenet: fix reference counting for phy node

From: Uwe Kleine-König <hidden>
Date: 2014-08-07 20:53:46

For the fixed phy setup make sure to not overwrite a valid value of
phy_dn (that is holding a reference to a phy-handle) and also acquire a
reference to the MAC node to consistently return with the phy_dn pointer
holding a reference.

Also add the corresponding of_node_put in the error path and the remove
function.

Fixes: 9abf0c2b717a ("net: bcmgenet: use the new fixed PHY helpers")
Fixes: aa09677cba42 ("net: bcmgenet: add MDIO routines")
Signed-off-by: Uwe Kleine-König <redacted>
---
 drivers/net/ethernet/broadcom/genet/bcmmii.c | 6 ++++--
 1 file changed, 4 insertions(+), 2 deletions(-)
diff --git a/drivers/net/ethernet/broadcom/genet/bcmmii.c b/drivers/net/ethernet/broadcom/genet/bcmmii.c
index add8d8596084..cdb28dd7d19d 100644
--- a/drivers/net/ethernet/broadcom/genet/bcmmii.c
+++ b/drivers/net/ethernet/broadcom/genet/bcmmii.c
@@ -311,12 +311,12 @@ static int bcmgenet_mii_probe(struct net_device *dev)
 	/* In the case of a fixed PHY, the DT node associated
 	 * to the PHY is the Ethernet MAC DT node.
 	 */
-	if (of_phy_is_fixed_link(dn)) {
+	if (!priv->phy_dn && of_phy_is_fixed_link(dn)) {
 		ret = of_phy_register_fixed_link(dn);
 		if (ret)
 			return ret;
 
-		priv->phy_dn = dn;
+		priv->phy_dn = of_node_get(dn);
 	}
 
 	phydev = of_phy_connect(dev, priv->phy_dn, bcmgenet_mii_setup, 0,
@@ -452,6 +452,7 @@ int bcmgenet_mii_init(struct net_device *dev)
 	return 0;
 
 out:
+	of_node_put(priv->phy_dn);
 	mdiobus_unregister(priv->mii_bus);
 out_free:
 	kfree(priv->mii_bus->irq);
@@ -463,6 +464,7 @@ void bcmgenet_mii_exit(struct net_device *dev)
 {
 	struct bcmgenet_priv *priv = netdev_priv(dev);
 
+	of_node_put(priv->phy_dn);
 	mdiobus_unregister(priv->mii_bus);
 	kfree(priv->mii_bus->irq);
 	mdiobus_free(priv->mii_bus);
-- 
2.0.1

Re: [PATCH] net: bcmgenet: fix reference counting for phy node

From: David Miller <davem@davemloft.net>
Date: 2014-08-07 23:07:09

From: Uwe Kleine-König <redacted>
Date: Thu,  7 Aug 2014 22:53:40 +0200
For the fixed phy setup make sure to not overwrite a valid value of
phy_dn (that is holding a reference to a phy-handle) and also acquire a
reference to the MAC node to consistently return with the phy_dn pointer
holding a reference.

Also add the corresponding of_node_put in the error path and the remove
function.

Fixes: 9abf0c2b717a ("net: bcmgenet: use the new fixed PHY helpers")
Fixes: aa09677cba42 ("net: bcmgenet: add MDIO routines")
Signed-off-by: Uwe Kleine-König <redacted>
Applied.
Keyboard shortcuts
hback out one level
jnext message in thread
kprevious message in thread
ldrill in
Escclose help / fold thread tree
?toggle this help