[PATCH net 2/5] be2net: clear promiscuous bits in adapter->flags while disabling promiscuous mode
From: Somnath Kotur <hidden>
Date: 2014-02-24 06:52:29
Subsystem:
emulex 10gbps nic be2, be3-r, lancer, skyhawk-r driver (be2net), networking drivers, the rest · Maintainers:
Ajit Khaparde, Sriharsha Basavapatna, Andrew Lunn, "David S. Miller", Eric Dumazet, Jakub Kicinski, Paolo Abeni, Linus Torvalds
From: Somnath kotur <redacted> We should clear promiscuous bits in adapter->flags while disabling promiscuous mode. Else we will not put interface back into VLAN promisc mode if the vlans already added exceeds the maximum limit. Signed-off-by: Kalesh AP <redacted> Signed-off-by: Somnath Kotur <redacted> --- drivers/net/ethernet/emulex/benet/be_main.c | 12 +++++++++--- 1 files changed, 9 insertions(+), 3 deletions(-)
diff --git a/drivers/net/ethernet/emulex/benet/be_main.c b/drivers/net/ethernet/emulex/benet/be_main.c
index 45662af..9e6d678 100644
--- a/drivers/net/ethernet/emulex/benet/be_main.c
+++ b/drivers/net/ethernet/emulex/benet/be_main.c@@ -1157,6 +1157,14 @@ ret: return status; } +static void be_clear_promisc(struct be_adapter *adapter) +{ + adapter->promiscuous = false; + adapter->flags &= ~BE_FLAGS_VLAN_PROMISC; + + be_cmd_rx_filter(adapter, IFF_PROMISC, OFF); +} + static void be_set_rx_mode(struct net_device *netdev) { struct be_adapter *adapter = netdev_priv(netdev);
@@ -1170,9 +1178,7 @@ static void be_set_rx_mode(struct net_device *netdev) /* BE was previously in promiscuous mode; disable it */ if (adapter->promiscuous) { - adapter->promiscuous = false; - be_cmd_rx_filter(adapter, IFF_PROMISC, OFF); - + be_clear_promisc(adapter); if (adapter->vlans_added) be_vid_config(adapter); }
--
1.5.6.1