[PATCH] drivers/net/ethernet/via/via-velocity.c: update napi implementation

From: Julia Lawall <redacted>

Drivers supporting NAPI should use a NAPI-specific function for receiving
packets.  Hence netif_rx is changed to netif_receive_skb.

Furthermore netif_napi_del should be used in the probe and remove function
to clean up the NAPI resource information.

Thanks to Francois Romieu, David Shwatrz and Rami Rosen for their help on
this patch.

Signed-off-by: Julia Lawall <redacted>

---
I still don't understand the reason for choosing netif_receive_skb,
specifically.  This patch is not tested.

 drivers/net/ethernet/via/via-velocity.c |    4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)

diff --git a/drivers/net/ethernet/via/via-velocity.c b/drivers/net/ethernet/via/via-velocity.c
index ef77631..d022bf9 100644
--- a/drivers/net/ethernet/via/via-velocity.c
+++ b/drivers/net/ethernet/via/via-velocity.c

@@ -2100,7 +2100,7 @@ static int velocity_receive_frame(struct velocity_info *vptr, int idx)
 
 		__vlan_hwaccel_put_tag(skb, htons(ETH_P_8021Q), vid);
 	}
-	netif_rx(skb);
+	netif_receive_skb(skb);
 
 	stats->rx_bytes += pkt_len;
 	stats->rx_packets++;

@@ -2904,6 +2904,7 @@ out:
 	return ret;
 
 err_iounmap:
+	netif_napi_del(&vptr->napi);
 	iounmap(regs);
 err_free_dev:
 	free_netdev(netdev);

@@ -2924,6 +2925,7 @@ static int velocity_remove(struct device *dev)
 	struct velocity_info *vptr = netdev_priv(netdev);
 
 	unregister_netdev(netdev);
+	netif_napi_del(&vptr->napi);
 	iounmap(vptr->mac_regs);
 	free_netdev(netdev);
 	velocity_nics--;

Hello.

On 08/14/2013 06:26 PM, Julia Lawall wrote:

From: Julia Lawall <redacted>

Drivers supporting NAPI should use a NAPI-specific function for receiving
packets.  Hence netif_rx is changed to netif_receive_skb.

Furthermore netif_napi_del should be used in the probe and remove function
to clean up the NAPI resource information.

Thanks to Francois Romieu, David Shwatrz and Rami Rosen for their help on
this patch.

Signed-off-by: Julia Lawall <redacted>

---
I still don't understand the reason for choosing netif_receive_skb,
specifically.  This patch is not tested.

    This driver is not the only one with the netif_rx() used with NAPI issue. 
I also overlooked this when converting drivers/net/ethernet/renesas/sh_eth.c 
to NAPI. I'll try to change the call and see if netperf would behave better...

WBR, Sergei

From: Julia Lawall <redacted>
Date: Wed, 14 Aug 2013 16:26:53 +0200

From: Julia Lawall <redacted>

Drivers supporting NAPI should use a NAPI-specific function for receiving
packets.  Hence netif_rx is changed to netif_receive_skb.

Furthermore netif_napi_del should be used in the probe and remove function
to clean up the NAPI resource information.

Thanks to Francois Romieu, David Shwatrz and Rami Rosen for their help on
this patch.

Signed-off-by: Julia Lawall <redacted>

Applied, thanks.